The 10 year limit is set by insurance companies, and does not necessarily represent the life of the rig. In more northern climates, where we only sail for 1/2 the year, the rule of thumb is 20 years. My new boat is 42 years old. When I bought it, I replaced the original standing rigging, and I see no flaws in it. I may go to synthetic rigging in the future while keeping a metal head stay so I can use a roller furler. BTW, I doubt those non-stop, around the world sailors re-rig in the middle of the ocean.
In the north where the mast is unstepped for half the year, giving the rigging a break, it does last longer than the abused rigging in the tropics that is in constant duty for the entire year. As for the non-stop sailors, nowadays they use synthetic rigging which lets them sail farther on a single rig. When they were steel rigged doing that course, a lot of rig failures occurred along the way. (The synthetic rigs of today still suffer rig failures but due to the fact that they use the spindliest little rig they can in the name of reducing windage).
@@RiggingDoctor I sailed from Florida to Alaska. On my way to Hawaii from the Galapagos I paralleled a large group going to the Marquesas and the most common problems reported by that fleet on the daily net were rigging failures. I was really surprised at the number of problems with rigging. One who experienced the second most severe failure was a professional rigger who almost lost his mast. When I got to HI I had a rigger check and tune my rig - he found the tang on the running backstay I'd used the most had fractured but not failed. Not likely to have been catastrophic but it was a good warning.
Thanks, every time you discuss the rigging I learn additional details. You and others that forge into the new willing to both take the leap and learn are an advantage to all. Looking forward to more on chafe covers.
I recently saw a dream boat in Annapolis. Everything looked amazing, but the life lines were steel cables through bare drilled stanchions. It was obvious that the holes should've been sleeved and grey Dyneema line running through them. I bought a dream boat - that's one of the first things I'll change. Did you know that Cuben Fiber (Dyneema) was invented in the 1990s as a fiber for sail fabric for racing boats? Wikipedia used to say that it's use for sails ended when it was found to stretch longitudinally (might just be the weave). It doesn't say that anymore - so maybe it wasn't true. Great stuff.
I can only imagine how frustrating it is after posting a video to be attacked in the comments. I've read all of them. With a simple Google search, there are hundreds of sites that echo your words of wisdom. Some people will sail regardless of the condition of their vessel. You are fighting a losing battle to even try to educate them. I'm glad that knowing this, you still try. Don't be discouraged. 👏
I wanted to go synthetic when I re-rigged last year but couldn't find anyone in the area that would do it. Should have done it myself! I certainly will when it comes time to replace my current rig.
@@RiggingDoctor sure is. Like I said I wanted it done this time. I should have done it myself I guess. Do I remember you saying on one of your vids that you were going to swap the lashings on the shrouds for turnbuckles?
You can also do it by eye and feel. Practice and experience get you to that point. You want to make sure the mast is true at rest and on each tack. If you see the mast looking a bit wonky on a particular tack, then you know you need to adjust the respective stays to get it there.
Good discussion on synthetic rigging. I need to find some of those long-term studies analyzing the effects of UV on Dyneema as I'm in the middle of purchasing a boat with synthetic rigging and the surveyor is clearly lacking in experience to evaluate the material. I believe what he is noting in his survey as UV damage is that very tiny outer layer you discuss.
samsonrope.com/docs/default-source/technical-bulletins/tb_inspection-retirement-pocket-guide_aug2013_web.pdf?sfvrsn=c3d63bbd_2 samsonrope.com/resources/general/understanding-creep Basically everything you could desire will be on this page: samsonrope.com/resources/technical-documents#TechnicalDocumentsGeneralResources
Yes I do! From my rod rigging documentation: As a general rule, Navtec recommends complete inspection of mast and rigging systems after a maximum of 40,000 to 60,000 sailing miles or 6 years, whichever comes first. This comprehensive maintenance schedule would include inspection of all the rod heads and end fittings. If any of the heads are cracked or worn, the rod must be re-headed. This doesn't mean that the complete rod section must be replaced; that would depend on whether the turnbuckles had enough stroke to compensate for a shorter section of rod. In a good installation, the rod will typically last significantly longer than the cold heads on the end. After a thorough inspection (40,000 to 60,000m or 6 yrs) with no evidence of damage, it may be reasonable to expect the rod to last an additional 20,000 to 30,000 miles. However, Navtec Recommends rod re-heading, and this is when a maintenance and inspection schedule becomes of paramount importance.
I am thoroughly convinced. Thank you for showing us. Your video brought a smile and not sure you are aware of. While you sing the praise of your synthetic rigging, little birdy is giving it a chew behind you. On the serious side, what spec is your dyneema for this rigging? I guessed there may be a few types that will give us a headache when trying to decide which to buy.
Thank you very much for posting this video. I had never considered Dyneema for rigging but that was more due to ignorance than any actual knowledge. Now, thanks to your videos I am considering it. In the comments below you mentioned that many riggers just use the +1mm over the existing SS rigging for safety reasons since they don't calculate the actual loads. Is there a formula that one should use that is a good and safe way for a novice? It almost sounds like a 9mm SS rig could be replaced by a 9mm Dyneema rig.
Thoughts on synthetic rigging on a trailered boat? We have a Catalina 25 that spends most of its time on the Chesapeake, but we trailer it occasionally and step the mast a handful of times per year. The steel rigging is a pain in the butt on the trailer because it gets tangled and is at risk of kinking, however if we moved to synthetic standing rigging, there is ample opportunity for chafing during stepping and unstepping.
Dyneema works really well for trailer sailors, since the line is soft when unloaded. As for chafing, it's not really a big issue since the stays will be slack so it's more case of them rubbing around and getting a little fuzzy instead of something gouging against them with a lot of pressure. What part of the Chesapeake do you sail? We plan on being in the Chesapeake around the Summer of 2022. We should meet up!
@@RiggingDoctor thanks! I thought about the possibility of coiling and storing the synthetic stays in canvas bags while trailering to avoid damage. We’re in the upper bay north of Baltimore. Meeting up would be awesome!
Great video! You had a rigging fail and I remember watching the video but I do not remember the source of the failure. Was it chafe? You two are amazing. Keep up the great videos. Love from B-more.
Not sure you mentioned another advantage - less weight aloft. I'm going to use it on my catamaran I hope to launch next year. I'll use wire for headsail roller furling. I hope to learn enough to do it all myself since no riggers live in the region.
I touched on it very quickly when I said it’s lighter, but didn’t go into detail on those advantages. Let me know if you need technical support when you are making your rigging. You can always email me for questions at riggingdr@gmail.com.
@@RiggingDoctor Thank you very much! I can find general stuff on channels like yours, Tulsa's, Zingaro, etc., but may have some specific questions to come. I did post a video tour of my project on my channel if interested in taking a look. It's a bit overwhelming for one guy, but getting there.
Mighty good info here, thanks. Checking the specifications of the Dyneema line you mention, it looks like it is a single braid line. So I assume the Brummell Lock Spice you featured in one of your videos is used? Thanks, I enjoy your videos.
I'm considering switching to synthetic, but am concerned with dyneema shrinking when it gets hot while aluminum mast expands when it gets hot. If you tune when it's cold, but forget to loosen when it gets hot how much force is put on the fittings (chain plates and mast tangs)? Will the shrinking dyneema cause enough force to pull chain plates out or rip mast tangs off? For this question, assume a temperature range from 40 degrees F to 80 degrees F. Also, assume rig is tuned at 50 degrees.
If you tuned at 50F, it’s only a difference of 30F. I tune at 80F and find it fine +/-20F. I have sadly been in weather approaching 110F and it was tight but it didn’t break anything. As the weather drops past -30F from tuning, I don’t go full sail and avoid gybes. At -40F from tuning, I keep sails no higher than the spreaders. So, if you tune it at 50F and forget to tune it at 80F it will be really tight and stress the hell out of your fittings, but as long as they are in good condition they won’t break. If there is any hairline cracks in them, the force might open the crack up and reveal its presence. If the boat is going to sail in weather ranging from 40F to 80F, I would shoot for tuning it at 60F. It will be slightly tighter in the summer and slightly looser in the spring/fall but usable all sailing season long! Turnbuckles will make it much easier to keep the tune, as loosening or tightening is just a matter of turning the screw as opposed to messing with the lashings.
Do you have any insurance issues with your boat and your rigging? I thought the 10yr/10K limit was largely driven by insurability. I imagine that an insurer would scratch their head for a while when you tell them about your standing rigging. Informative video. Thanks for the info. 😀
We only have liability insurance since we fix everything ourselves and do our best to not be in the situation where we would need to submit a claim. 10y/10000nm is driven by insurance because in that time frame, cracks will arise and if not found in an inspection they will be found when it breaks!
I like synthetic rigging. The only thing I worry about is lightning. If the boat gets hit by a lightning, isn’t the Dyneema going to melt and the mast would go down?
2 things that you didn't cover at all in one, and only touched upon in the other: Cost: what are the cost differences, if any? Weight: You stated there were weight savings but were too vague. Is it 50% weight saved? More? Less? Ease of installation: How easy would it be for anyone to install this themselves or how difficult would it be to employ professional riggers to install it (would they be up for it or would most try to push you towards steel?)
These are good points! Cost: cheaper than steel if you do it yourself, equivalent if you pay to have it made for you. Weight: about 90% lighter. The entire rig will weigh a few pounds so switching out the stays is very easy since nothing is heavy. I would say that it’s something a beginner could easily do since there are no special or expensive tools involved.
Thanks for this. Where is the best place to read about the long term UV test results. Down here on the equator the sun/humidity destroys almost everything.
DSM (the manufacturer of Dyneema) publishes all of their test results. The have done extensive research in the mining and arborist worlds, and that is where I have gotten most of my information from when Dyneema was new for the marine world. Now that it’s been a few years, their marine information is starting to fill in better. As for the UV, I spoke with the head of their R&D division and he told me about the 0.1μm skin that forms over the line. A few years later, the study was published by them so now I fully trust his word as it’s no longer just hearsay.
I recently purchased an older semi-custom boat with a Dyneema center board pennant. The boat had been very well maintained. The surveyor (old school but very competent) had issues with the Dyneema pennant and recommended switching back to steel cable. Your thoughts on Dyneema for a center board pennant where visualization of the synthetic cable isn't easily observable? Thanks for your insights and candid observations about standing rigging.
It needs to be inspectable. I replaced our wind steering control lines with Dyneema and they chafed through in a few thousand miles! As long as all the leads are fair and there is no chafing, it should last a long time, but you need to be able to inspect the whole length or you might find yourself as a very deep draft vessel one day. If you are able to inspect it but not easily, I would give it a look at least once a week if you are sailing full time, or once a month if you are a weekend sailor. If it’s easy to get at, I would give it a look every time you plan to go sailing.
I have a 43' Roberts center cockpit full length keel ketch. The main is 13m and both the main and mizzen have two upper and two lower shrouds, no centre backstays and all standing rigging is 9.5mmm [ vernier ] s/s. I'd say it was 10mm that has pulled in. So I'm thinking of 12mm dyneema for the main and 10mm for the mizzen, thoughts anyone????
Ideally, you want to figure out the RM30 and then figure out the rig loads to properly size the stays. I have also heard of other riggers simply saying to go 1mm thicker Dyneema than the steel stay was.
@@RiggingDoctor Yea' that 1mm was something I mentioned to you a few days ago and the way areas work with solids is that it is always added to or subtracted from the outside. When you look at the surface area of circles with increasing diameters and do a 2,4,6,8,10,12 thing [ I used to be into telescopes ] the surface areas increase at an amazing rate. So the cross section area of a 10 compared to a 12 would be a sizable percentage and I think 12mm dyneema [ 75 ] is 17,000kg - Wow and there are 4 per side, so........pretty cool Herbie.
I don't really know how old my rig is but I suspect it is around that 10 year mark. I'd like to go synthetic but if hat diameters would i need for a 25 ft dufour 1800.
What's the cost difference if any between your synthetic rigging and wire or rod rigging for your boat? Thanks in advance, I'm a total noob and will subscribe.
Uninformed sailors will complain, "But synthetic rigging can be cut with a knife so that is too dangerous" (wrong, it can't be cut arbitrarily) Yet no one ever says, "When your STEEL WIRE fails under heavy load, which is when it is most likely to fail, the wire can explode and whipsaw at you, to cut you or your crew's bodies literally in half". (True ! Steel wire is very, very dangerous in a breaking situation since it snaps suddenly and explodes all the energy of the load instantaneously) Because synthetic rigging does not store energy inside the entire loaded line in the unlikely event that the final holding strand chafes through or snaps, the split pieces become a limp noodle of frayed rope, not dangerous in themselves. So, synthetic rigging wins again.
Hello Herb.I know you're a Dyneema a purist...that said, how would you feel about Dyneema combined with SS turnbuckles for tuning and ease. This appeals to my lazy nature and brings the thought of switching to Dyneema a little closer? Be well.
That works very well! It’s actually the ideal setup, just too expensive for us to have. Each turnbuckle costs us $100 and we have 12 stays! We have turnbuckles on the two headstays, the other 10 are purely lashings to save us $1000!
It depends on a whole bunch of factors. I can do the math for you, my consult fee is $120. If you want to figure it out yourself, look at the RM30 value for your boat as that is the maximum rig load your boat will experience.
Great content as ever Herb. I remember from a video, posted sometime in the last year, you mentioned that you were considering changing out the synthetic tensioning method for turnbuckles. Is that still the plan or have you changed your mind? I guess turnbuckles would make tuning quicker/easier, but if you're only tuning once every 3 years, speed and ease is not much of an issue :) Interested in your thoughts. Also, do you (or viewers) know what insurance companies think of synthetic rigging? Un-insurable? Insurable with the same 10y/10k nm re-rig caveat?
Insurance companies don’t care what you are rigged with as long as it’s 10y or 10,000nm. I would like to have turnbuckles but they cost about $100 each, so I’m going to keep deadeyes and $1000 in my pocket. I made the headstays turnbuckles because it was a pain to get the tensioning lines rigged up their and it was only two of them. If someone can afford turnbuckles, the combination of deadeye to take up the slack and creep with a turnbuckle below will be ideal!
Initial cost is cheaper IF you do it yourself. It’s easy but time consuming to make, so if you are paying someone by the hour, it can be as expensive as steel rigging. I have some ideas about how to make it work inside a furler but I haven’t tested them yet to say if it works or not.
I see that windage has come up tangentially so far, but to address it directly: have you found any practical difference between the synthetic and a steel rig in terms of things like weathering bad storms and high winds? Not being a racer, my primary windage concern is that drag in a blow, especially in our increasingly wild weather world. Cheers!
We have hove to in really high winds (we stopped sailing and started heaving to when the winds hit 60 knots). It wasn’t fun because of the present situation but we weren’t heeled over anything ridiculous. There is additional windage but the reduction in weight aloft helps keep the boat upright. I would say that our tiny trysail was the biggest windage in the rig and had us heeled over between 10-15° during the storm.
Not having a furled headsail is the biggest decrease in windage in a blow. When we switched and had our first squall, that was the biggest thing we noticed. The bow was no longer pulled along by the wind like it used to.
Right now, you can replace all the other stays in Dyneema and keep the furler on a metal stay if you wanted to convert and keep the furler. I’m working on a few ideas to make Dyneema work inside a furler but I haven’t tested them yet to say if it works or not.
If you want to keep the furler on the headstay and have the advantage of light synthetic then go with antitorsional cable and continuous furler, you will be only able to set the jib full in or full out and eventually drop it because it’s hanked on. I’ll go that way on my next boat. Great vid Herb, keep sharing all your knowledge on synthetic rigging, it’s a pleasure to appraise that much from you, thank you!
Hey guys, I got a question that just popped into my brain. It may sound stupid but here we/I go. Can you mix wire standing rigging with synthetic, not on the soma line? Like for instance, I need to change out a wire rigging on my boat bc it broke (yes, Mast still up, broke on the hard during a hurricane). I want to change all the rigging to synthetic, but don't have the cash to do it all at once. So, one at a time? I know its crazy and probably not, but had to ask.
You can mix and match, but you need to do one side of the mast at a time. So, forward lowers, aft lower, and cap shrouds at the same time on that side of the mast. For example, port in steel starboard in Dyneema.
Can you reference the 10 year limit on SS rigging. I would love to see the numbers and how that was determined. I know insurance companies quote the 10 years, but that is for their liability thanks
It’s because by 10 years, stress cracks will have formed somewhere in the rig. This is why insurance companies want their rigs replaced at 10 years to reduce the number of claims they have to deal with.
It’s not so much from tests but just historical data of the age of rigging when problems have arises. From this, the insurance companies have done their calculations and risk assessments to determine that 10 years is a safe bet for them.
@@RiggingDoctor, I agree, but to clarify, the usual way insurance companies do their "investigation" is around the loss of money -- simply that. If they have numerous claims and find out that their client has not done new rigging for many years/nm, they simply draw a line such that almost all of their client's claims fall on the wrong side to save their business. Thus, if you have insurance and expect some reassurance, you are forced to re-rig, although your rig may not have been subject to terrible forces or any significant corrosion. Just my two cents. Cheers.
We don't have that where we're from. Insurance companies don't care when the rigging is replaced. If it fails, the insurance payout is affected by the age, though. Insurance companies have guides for checking the rigging, and when to replace it. The checks boils down to about broken strands, rust/oxidation, kinks in the wire, cracks or enlonged holes in the eyelets. Broken chainplates or missing pins is the reasons I've heard that rigs are coming down, and our rigging is as old as our boats.
Yes, if by natural you are referring to “plant grown” and not mined metal. Steel is iron and carbon, not exactly something you would find lying around in the ground is vast quantities. Dyneema is absolutely synthetic, as it was designed in a lab.
It depends on the type of rig and if the spreaders are lateral or aft swept. Aft swept need to be tensioned to 25% of your wires breaking strength while lateral can be much looser. The target for lateral spreader rigs is 15-20% of the wires breaking strength, depending on a few factors. As the wire gets thicker, its breaking strength increases and so does the minimum tension.
So, look up the folding rule method and the percent elongation at breaking strength for the dyneema you’re using to calculate your ratio to use with the folding rule
Hey Herb, I was wondering and want to ask this for a long time, cose i have n abandoned boat i'd like to Re Rig, and thautgh abour Dyneema, but i fund realy hard to find sellers in france and was looking towards Marlow in UK, but they have dome different products like D20, SK 78 and SK99, each with different specs, what uou used, or recomend for a cruising sailboat? thanks for all thin knowledge =)
We used heat set SK78 for our standing rigging and and our inner forestay is DM20. DM20 is better than SK78 and SK99, but it’s also more expensive. For the price, heat set SK78 is a less expensive and very good.
@@RiggingDoctor awesome I'll order some up! These Hanks look tired anyways! Going to rig up a 1990 West wight potter 19 with dyneema. Might be the only one ever rigged that way!
I wouldn’t say not suitable because we have been sailing with it in very varied climates. It’s just important to remember that it will slacken out when it gets cold so don’t have a full sail crash jibe in the evening! It holds its tune +/-20°F, but we have been able to sail on shorter sails all the way down to -50°F from the tuning temperature without problem (tuned at 80°F and sailing with it very slack at 30°F). I wouldn’t try beating in a gale with rigging that slack, but we were able to reach with success in the winter.
I used to believe that it was important but I have met people who rigged with Amsteel for a fraction of the price and it is working very well. It creeps a bit more in the beginning but then it settles down and works beautifully for less money.
I didn't hear you mention cold weather being a problem.... Is it still? Or have they made improvements to dyneema where you can use it reliably in cold weather?
If you did it again, would you take DM20 instead? I think Dux is fairly reasonable over here if you buy 100 Meters at a time. What would you use with minimum creep?
We had a new metal inner forestay when I rerigged with dyneema (so I didn’t replace it at that time) that died on us in 2019 and I replaced with DM20. It is an incredible material but really pricey! Creep on DM20 is significantly lower than creep from heat set SK78. All this said, I have met two people with 40+ foot boats that rigged with Amsteel Blue (not heat set). It is significantly cheaper so they simply went way oversized and have minimal issues with creep. So, more expensive doesn’t always mean “the only way to do it”.
Yes* *the pipe will protect against chafe caused by the sheets but it needs to be securely lashed to the stay so that it itself doesn’t cause chafe as it rolls around.
I have now seen so many pvc cracked into sections or lengthwise. May recommend Pex instead. If using pvc pick electrical conduit preferably schedule 80. Carefully chamfered ends plus chafe protection under for synthetic.
Rod has much lower wind resistance but the heads are very difficult to inspect. Synthetic is more windage but very easy to inspect. That’s kind of the big difference between them. It gets down to nitty gritty stuff like weight and stuff, but that’s the general difference between the two.
@@RiggingDoctor Well, if all else is dyneea and only one is metal, that's not too bad. I have a friend in his 70's and he recommends thigh tensile gal. and basically the big diff. between it and s/s is looks I think.
@@gregorytremblay4913 HUH, thanks for that Greg. I am really only thinking about Dyneema, but are you saying that the gal stains the sails? and just out of curiosity, do you know any of the maintenance issues with it? I really thought that high tensile gal would be long term etc really good, just ugly.
Galvanized steel is actually really good for rigging, but the discoloration comes from the slurry you have to paint on it all the time to keep it from rusting. If it’s worm/parcel/served and then maintained wet with slurry religiously, the wire will still look like new at 50 years! The problem is the slurry. I was about to rerig in galvanized when I figured out how to make Dyneema work, so I went with synthetic.
Insurance companies requires that the standing riggin be replaced after 10 years, however they do not mention that it should be replaced after 10,000 miles. Where did you get this information? Thanks, Richard
I charge $300 per stay to fabricate the rigging, and $400 for a headstay, plus the cost of materials. Different rigs need different thicknesses of line which changes the price of materials, but my labor cost is fixed.
@@RiggingDoctor Does the shrinking require loosening the rig? Pacific North West based our temperature swings are becoming radical. Had reached over 110°F on the water this year, switch back to freezing.
Oh, BTW, I didn't find out about your Zoom until 2hrs after. Sorry. Would have been in on that. Maddie, where's your bird, is it's name Charlie like Herbs but spelled different?
Where do you get this 10 year, 10,000 mile life from? I can show you many, many boats from the 1970's and 1980's with absolutely original standing rigging. In 35 years in the business as a Great Lakes marina manager I have only seen two catastrophic rigging failures and both of those were attributed to improper installation. How long do these synthetics stand up to sunlight? Chafe? I have seen chafe result in the failure of a 1/2" dock line during the course of one overnight gale. Nylon, not dyneema but my experience is that any loaded synthetic line will cut like butter if exposed to any sharp chafe. I'm not sure your advice is best for those who do not fully understand the rig, the rigging and the tune. Running rigging, dyneema for sure. The consequences of failure (other than hoisting humans and there should always be a redundant safety line) is minimal compared to the loss of a cap shroud etc.
The Great Lakes are a special place, and the only place where time stands still for steel rigging. Oddly enough, when one of those boats leaves the lakes and enters the salty world, their rigging dies a miserable and rapid death! Dyneema is actually very resistant (but not immune) to chafe. It takes a lot of effort and time to chafe through it, which is plenty of time to find and stop it from becoming a serious issue. Nylon stretches a lot, which gives it excellent elasticity, but also generates a lot of heat which further degrades the fibers. Dyneema has no elasticity, so it doesn’t heat itself up for a speedy death. The 10 year, 10,000nm business is based on the findings from insurance companies. They like their bots to be rerigged at those two points to reduce the risk of claims. At 10 years in salty places where the boats remain rigged year round, stress cracks will have developed somewhere in the rig.
@@RiggingDoctor I used nylon as an example of chafe issues with synthetics. Dacron is similar. I guess my point is that you need to be sure of what is going on. Tough in the middle of the night in a gale. I am unaware of boats getting routinely rerigged during circumnavigation. Although my workplace was in the Great Lakes over the years many customers took their boats south for several years at a time and a couple completed circumnavigations. You still have not addressed the effect of continuous UV exposure. Swaged terminals can be a problem but I have not seen a catastrophic failure. I have seen broken strands. Stay-locs or Norseman facilitate inspection.
Boats should get rerigged but rarely do before something breaks after their first 10,000nm. As for UV, I talked about it for a moment. The outer 0.1μm gets destroyed by UV and then protects the rest of the rope from any further damage. Long term testing by DSM has found no loss of strength from continuous UV exposure so it has been determined to be negligible.
@@RiggingDoctor Are you telling me your main shrouds and backstays are only 9mm? I was told by a rigger, that the way he does it is to add 1mm dia to the existing s/s 1x19. But hey, don;t get me wrong, you have done it and it has taken you across the Atlantic and back.
Going 1mm bigger than steel is an easy “safe way” to figure out a size of Dyneema. I did mine from the water up with calculations to figure out exactly how much force my rig would be subjected to and then found a line size that would meet my needs with a hefty safety factor. Our rig is pretty short by modern standards so the loads are less intense on the rigging. I have done rigging calculations for a variety of 30 foot boats and some can get by on 5mm stays while others with taller rigs need 9mm stays!
I have Colligo 13mm heat set SK75 on my Island Packet 370. According to Colligo, dyneema is so strong that breaking strength is irrelevant. Size based on creep. So I have 8 stays with 13mm SK75 and 2 Furlers with SS. It’s feels beefy.
I provide links to many of your videos to my Marlinespike Seamanship lessons for the Hoofer Sailing Club. I created a playlist of the ones on UHMPE rigging for their use. Here is a link: th-cam.com/video/Az9NDlG3LMg/w-d-xo.html
IMO you didn't address the primary advantage of Dyneema for a long term remote cruiser: you can carry a complete re-rig/repair kit with you. Hard to do that with steel.
I consider a free standing mast a no brainer.................Standing rigging is a nuisance in every respect. There are numerous potential failure points (every connection, every chain plate, etc), any one of which can bring the mast down. With a suitable free standing mast you have NONE of the problems of standing rigging, and side step many of sailing the problems inherent in a stayed mast.
@@RiggingDoctor There are a lot of unstayed rigs other than the Freedom models…. and a lot to be said for them. Modern sailors seem to think that the triangular sail of the Bermuda rig, and it’s towering stayed mast is the ultimate rig for every purpose…. It is clearly NOT.
I agree! If the boat is built to support the mast, then you never have to worry about the rig anywhere you go! If you do have cable dependent rigging, then you are stuck choosing between different materials.
@@stonetoolcompany3649 ...and in small boats they are a blast. On bigger boats the masts have to be constructed very carefully. Often out of carbon fiber, mostly custom made at very high costs. This prohibits the use of these riggs for most of us.
I guess I have an older freedom rig, keel stepped boxed Spruce main, deck stepped mizzen. Cheaper than carbon one can assume without checking, actually amazingly light.
do you even listen to yourself? where do you dream this horse crap up at? think about it. every single year, for hundreds, if not thousands of years, folks have sailed around the world. I doubt anybody in the past 100 years has replaced their steel rigging half way through, let alone everybody. wow, you have bumped your head. rather than to continue to give bad advice to folks new to the concept of sailing, how about just getting a job and earn an honest living.
People who sail around the world are sailing with rigging that is on borrowed time. Prudent sailors will inspect their rigging and replace it accordingly. The reason people don’t replace their rigging in a timely manner is mostly due to ignorance of the need. My goal is to educate and inform new sailors as well as more experienced sailors such as yourself who do not know how often their rigging needs replacing.
@@RiggingDoctor here's your history lesson: we grew up, centuries, meliniums ago with rope, mostly Hemp rope to be exact, most commonly made from marijuana stems. the rope frayed and chaffed, and deteriorated with the elements. therefore where eventually (for the most part) replaced with galvanized, and then stainless steel. the rope is more forgiving do to it's slight elasticity. yet had a shorter life expectancy, and a higher error ratio. unless grossly inadequate, such as regional coastal cruiser, crossing oceans in troubled weather/ water, it does not wear out or destroy otherwise healthy steel rigging. you are partially right, dynema is a better rigging, for reducing stress on the overall rig, and being more forgiving in one sense. it is a bit more forgiving than adequate steel rigging, but as you mentioned, without careful and constant caution (and a measure of good luck) it can and will chaff with minimal contact of foriegn (to it) repeated contact. At sea, in hazardous conditions, when visibility is poor, and attention is focused on situations other than the rigging is no time to have chaff and a falling mast with broken dynema. no doubt there are circumstances, probably many, if not most, that dynema is a worthwhile and completely intelligent option with minimal risks, likewise the best option. but steel needing replaced every six months and X number of miles, or however you put it, its full on, flat out nonsense. bull crap, and creating a danger to those that take your advice without knowing better.
Herb, you sold me. Now I just have to get a boat.
Me too!!
@@captainandthelady rofl
Re-rigging my 40ft trimaran in dyneema now after pre-making everything following your videos. Much appreciated advice.
Glad it was helpful for you!
The 10 year limit is set by insurance companies, and does not necessarily represent the life of the rig. In more northern climates, where we only sail for 1/2 the year, the rule of thumb is 20 years. My new boat is 42 years old. When I bought it, I replaced the original standing rigging, and I see no flaws in it. I may go to synthetic rigging in the future while keeping a metal head stay so I can use a roller furler. BTW, I doubt those non-stop, around the world sailors re-rig in the middle of the ocean.
In the north where the mast is unstepped for half the year, giving the rigging a break, it does last longer than the abused rigging in the tropics that is in constant duty for the entire year.
As for the non-stop sailors, nowadays they use synthetic rigging which lets them sail farther on a single rig. When they were steel rigged doing that course, a lot of rig failures occurred along the way. (The synthetic rigs of today still suffer rig failures but due to the fact that they use the spindliest little rig they can in the name of reducing windage).
@@RiggingDoctor I sailed from Florida to Alaska. On my way to Hawaii from the Galapagos I paralleled a large group going to the Marquesas and the most common problems reported by that fleet on the daily net were rigging failures. I was really surprised at the number of problems with rigging. One who experienced the second most severe failure was a professional rigger who almost lost his mast. When I got to HI I had a rigger check and tune my rig - he found the tang on the running backstay I'd used the most had fractured but not failed. Not likely to have been catastrophic but it was a good warning.
Thanks, every time you discuss the rigging I learn additional details. You and others that forge into the new willing to both take the leap and learn are an advantage to all.
Looking forward to more on chafe covers.
I recently saw a dream boat in Annapolis. Everything looked amazing, but the life lines were steel cables through bare drilled stanchions. It was obvious that the holes should've been sleeved and grey Dyneema line running through them. I bought a dream boat - that's one of the first things I'll change.
Did you know that Cuben Fiber (Dyneema) was invented in the 1990s as a fiber for sail fabric for racing boats? Wikipedia used to say that it's use for sails ended when it was found to stretch longitudinally (might just be the weave). It doesn't say that anymore - so maybe it wasn't true. Great stuff.
Thanks for sharing!
I can only imagine how frustrating it is after posting a video to be attacked in the comments. I've read all of them. With a simple Google search, there are hundreds of sites that echo your words of wisdom. Some people will sail regardless of the condition of their vessel. You are fighting a losing battle to even try to educate them. I'm glad that knowing this, you still try. Don't be discouraged. 👏
Thank you very much!
At the end of the day, I’m trying to provide the information that I wish existed when I started sailing.
I wanted to go synthetic when I re-rigged last year but couldn't find anyone in the area that would do it. Should have done it myself! I certainly will when it comes time to replace my current rig.
Always next time ;)
@@RiggingDoctor sure is. Like I said I wanted it done this time. I should have done it myself I guess.
Do I remember you saying on one of your vids that you were going to swap the lashings on the shrouds for turnbuckles?
My rig is 35years old and still standing and many people sailed around the world not changing any rigging part.
That’s like driving a car 100,000 miles on the original oil. It can be done but you risk everything by not doing the proper maintenance.
Thanks so much for the education and heads-up I'm soaking up
You covered all the points but one! How about tuning the rig to the correct tension? Lots of work and fancy equipment (load cells) to get it right!
You can also do it by eye and feel. Practice and experience get you to that point.
You want to make sure the mast is true at rest and on each tack. If you see the mast looking a bit wonky on a particular tack, then you know you need to adjust the respective stays to get it there.
Always good advice from The Rigging Docter. Thanks again Herb
Glad you liked it!
Thanks Herb👍 I'd be interested to hear your thoughts on temperature differences and rigging length changes you have encountered.
A well tuned rig is good for about +/-20°F from where you set it.
great video answered lots of my questions.
Very informative
Good discussion on synthetic rigging. I need to find some of those long-term studies analyzing the effects of UV on Dyneema as I'm in the middle of purchasing a boat with synthetic rigging and the surveyor is clearly lacking in experience to evaluate the material. I believe what he is noting in his survey as UV damage is that very tiny outer layer you discuss.
Look up the papers from Samson for mining, arbor, and oil rigs. They had the best information in them!
samsonrope.com/docs/default-source/technical-bulletins/tb_inspection-retirement-pocket-guide_aug2013_web.pdf?sfvrsn=c3d63bbd_2
samsonrope.com/resources/general/understanding-creep
Basically everything you could desire will be on this page: samsonrope.com/resources/technical-documents#TechnicalDocumentsGeneralResources
Yes I do!
From my rod rigging documentation: As a general rule, Navtec recommends complete inspection of mast and rigging systems after a maximum of 40,000 to 60,000 sailing miles or 6 years, whichever comes first. This comprehensive maintenance schedule would include inspection of all the rod heads and end fittings. If any of the heads are cracked or worn, the rod must be re-headed.
This doesn't mean that the complete rod section must be replaced; that would depend on whether the turnbuckles had enough stroke to compensate for a shorter section of rod. In a good installation, the rod will typically last significantly longer than the cold heads on the end.
After a thorough inspection (40,000 to 60,000m or 6 yrs) with no evidence of damage, it may be reasonable to expect the rod to last an additional 20,000 to 30,000 miles. However, Navtec Recommends rod re-heading, and this is when a maintenance and inspection schedule becomes of paramount importance.
Rod is amazing but really requires a diligent maintenance period. The heads are feats of engineering!
Ty, Herb, very interesting.
I am thoroughly convinced. Thank you for showing us. Your video brought a smile and not sure you are aware of. While you sing the praise of your synthetic rigging, little birdy is giving it a chew behind you. On the serious side, what spec is your dyneema for this rigging? I guessed there may be a few types that will give us a headache when trying to decide which to buy.
Mine is 9mm New England Ropes STS-HSR.
It’s heat set Dyneema.
@@RiggingDoctor Thank you so much. Dyneema people should thank you too.
Thank you very much for posting this video. I had never considered Dyneema for rigging but that was more due to ignorance than any actual knowledge. Now, thanks to your videos I am considering it.
In the comments below you mentioned that many riggers just use the +1mm over the existing SS rigging for safety reasons since they don't calculate the actual loads. Is there a formula that one should use that is a good and safe way for a novice? It almost sounds like a 9mm SS rig could be replaced by a 9mm Dyneema rig.
Thoughts on synthetic rigging on a trailered boat? We have a Catalina 25 that spends most of its time on the Chesapeake, but we trailer it occasionally and step the mast a handful of times per year. The steel rigging is a pain in the butt on the trailer because it gets tangled and is at risk of kinking, however if we moved to synthetic standing rigging, there is ample opportunity for chafing during stepping and unstepping.
Dyneema works really well for trailer sailors, since the line is soft when unloaded. As for chafing, it's not really a big issue since the stays will be slack so it's more case of them rubbing around and getting a little fuzzy instead of something gouging against them with a lot of pressure.
What part of the Chesapeake do you sail? We plan on being in the Chesapeake around the Summer of 2022. We should meet up!
@@RiggingDoctor thanks! I thought about the possibility of coiling and storing the synthetic stays in canvas bags while trailering to avoid damage.
We’re in the upper bay north of Baltimore. Meeting up would be awesome!
Great video! You had a rigging fail and I remember watching the video but I do not remember the source of the failure. Was it chafe? You two are amazing. Keep up the great videos. Love from B-more.
It was chafe. The anchor broke loose and chafed on the headstay!
Not sure you mentioned another advantage - less weight aloft. I'm going to use it on my catamaran I hope to launch next year. I'll use wire for headsail roller furling. I hope to learn enough to do it all myself since no riggers live in the region.
I touched on it very quickly when I said it’s lighter, but didn’t go into detail on those advantages.
Let me know if you need technical support when you are making your rigging. You can always email me for questions at riggingdr@gmail.com.
@@RiggingDoctor Thank you very much! I can find general stuff on channels like yours, Tulsa's, Zingaro, etc., but may have some specific questions to come. I did post a video tour of my project on my channel if interested in taking a look. It's a bit overwhelming for one guy, but getting there.
i think i will keep my s/s rigging. love ya shows
Thanks :)
Mighty good info here, thanks. Checking the specifications of the Dyneema line you mention, it looks like it is a single braid line. So I assume the Brummell Lock Spice you featured in one of your videos is used? Thanks, I enjoy your videos.
Yep, it makes the eye splice for the ends of the stay.
I'm considering switching to synthetic, but am concerned with dyneema shrinking when it gets hot while aluminum mast expands when it gets hot. If you tune when it's cold, but forget to loosen when it gets hot how much force is put on the fittings (chain plates and mast tangs)? Will the shrinking dyneema cause enough force to pull chain plates out or rip mast tangs off? For this question, assume a temperature range from 40 degrees F to 80 degrees F. Also, assume rig is tuned at 50 degrees.
If you tuned at 50F, it’s only a difference of 30F. I tune at 80F and find it fine +/-20F. I have sadly been in weather approaching 110F and it was tight but it didn’t break anything. As the weather drops past -30F from tuning, I don’t go full sail and avoid gybes. At -40F from tuning, I keep sails no higher than the spreaders.
So, if you tune it at 50F and forget to tune it at 80F it will be really tight and stress the hell out of your fittings, but as long as they are in good condition they won’t break. If there is any hairline cracks in them, the force might open the crack up and reveal its presence.
If the boat is going to sail in weather ranging from 40F to 80F, I would shoot for tuning it at 60F.
It will be slightly tighter in the summer and slightly looser in the spring/fall but usable all sailing season long!
Turnbuckles will make it much easier to keep the tune, as loosening or tightening is just a matter of turning the screw as opposed to messing with the lashings.
SOLD!🙂👍🏻👏🏻👏🏻👏🏻
Do you have any insurance issues with your boat and your rigging? I thought the 10yr/10K limit was largely driven by insurability. I imagine that an insurer would scratch their head for a while when you tell them about your standing rigging.
Informative video. Thanks for the info.
😀
We only have liability insurance since we fix everything ourselves and do our best to not be in the situation where we would need to submit a claim.
10y/10000nm is driven by insurance because in that time frame, cracks will arise and if not found in an inspection they will be found when it breaks!
I like synthetic rigging. The only thing I worry about is lightning. If the boat gets hit by a lightning, isn’t the Dyneema going to melt and the mast would go down?
Yep! That is what would happen in a flash.
Lightning rarely occurs on the ocean and we run the gamble when we are near shore.
2 things that you didn't cover at all in one, and only touched upon in the other:
Cost: what are the cost differences, if any?
Weight: You stated there were weight savings but were too vague. Is it 50% weight saved? More? Less?
Ease of installation: How easy would it be for anyone to install this themselves or how difficult would it be to employ professional riggers to install it (would they be up for it or would most try to push you towards steel?)
These are good points!
Cost: cheaper than steel if you do it yourself, equivalent if you pay to have it made for you.
Weight: about 90% lighter. The entire rig will weigh a few pounds so switching out the stays is very easy since nothing is heavy. I would say that it’s something a beginner could easily do since there are no special or expensive tools involved.
Most riggers will try to push you towards steel because it’s much faster for them to make and it uses that expensive swage machine they had to buy.
Can you guys do a video about how you keep such big bird babies happy w/ sailing?
We are going to be doing that soon! We’re planning on doing it as a live video :)
Thanks for this. Where is the best place to read about the long term UV test results. Down here on the equator the sun/humidity destroys almost everything.
DSM (the manufacturer of Dyneema) publishes all of their test results. The have done extensive research in the mining and arborist worlds, and that is where I have gotten most of my information from when Dyneema was new for the marine world. Now that it’s been a few years, their marine information is starting to fill in better.
As for the UV, I spoke with the head of their R&D division and he told me about the 0.1μm skin that forms over the line. A few years later, the study was published by them so now I fully trust his word as it’s no longer just hearsay.
Great video! How does synthetic compare to steel in terms of cost?
If you do it yourself, it’s much cheaper. If you pay to have it done, it’s about the same price
I recently purchased an older semi-custom boat with a Dyneema center board pennant. The boat had been very well maintained. The surveyor (old school but very competent) had issues with the Dyneema pennant and recommended switching back to steel cable. Your thoughts on Dyneema for a center board pennant where visualization of the synthetic cable isn't easily observable? Thanks for your insights and candid observations about standing rigging.
It needs to be inspectable. I replaced our wind steering control lines with Dyneema and they chafed through in a few thousand miles! As long as all the leads are fair and there is no chafing, it should last a long time, but you need to be able to inspect the whole length or you might find yourself as a very deep draft vessel one day.
If you are able to inspect it but not easily, I would give it a look at least once a week if you are sailing full time, or once a month if you are a weekend sailor. If it’s easy to get at, I would give it a look every time you plan to go sailing.
@@RiggingDoctor thanks for prompt and thoughtful reply
I like it but dont also forget that if you get hit by lightning it might blow up your standing rigging right?
Show me a boat setup that doesn’t get blown apart by lightning 🤣
Great information. Id also be interested in the difference in cost?
The cost is about the same if you have someone do it for you, but if you do it yourself, synthetic is cheaper
I have a 43' Roberts center cockpit full length keel ketch. The main is 13m and both the main and mizzen have two upper and two lower shrouds, no centre backstays and all standing rigging is 9.5mmm [ vernier ] s/s. I'd say it was 10mm that has pulled in. So I'm thinking of 12mm dyneema for the main and 10mm for the mizzen, thoughts anyone????
Ideally, you want to figure out the RM30 and then figure out the rig loads to properly size the stays.
I have also heard of other riggers simply saying to go 1mm thicker Dyneema than the steel stay was.
@@RiggingDoctor Yea' that 1mm was something I mentioned to you a few days ago and the way areas work with solids is that it is always added to or subtracted from the outside. When you look at the surface area of circles with increasing diameters and do a 2,4,6,8,10,12 thing [ I used to be into telescopes ] the surface areas increase at an amazing rate. So the cross section area of a 10 compared to a 12 would be a sizable percentage and I think 12mm dyneema [ 75 ] is 17,000kg - Wow and there are 4 per side, so........pretty cool Herbie.
I don't really know how old my rig is but I suspect it is around that 10 year mark.
I'd like to go synthetic but if hat diameters would i need for a 25 ft dufour 1800.
Cheers !
Plus synthetic floats and it's less likely to injure someone in the event of failure.
Very true!
Synthetic rope is the only way to go, but do you still use stainless turn buckles for tweeting it?
What's the cost difference if any between your synthetic rigging and wire or rod rigging for your boat? Thanks in advance, I'm a total noob and will subscribe.
It’s a bit more expensive compared to steel, but it doesn’t have all the problems of steel
No good where I am located in Newfoundland. Too much change in temperature and constant adjusting.
That’s good to identify! Synthetic is great if you are in the right climate. If you are not, steel is your new best friend!
Uninformed sailors will complain, "But synthetic rigging can be cut with a knife so that is too dangerous" (wrong, it can't be cut arbitrarily)
Yet no one ever says, "When your STEEL WIRE fails under heavy load, which is when it is most likely to fail, the wire can explode and whipsaw at you, to cut you or your crew's bodies literally in half". (True ! Steel wire is very, very dangerous in a breaking situation since it snaps suddenly and explodes all the energy of the load instantaneously)
Because synthetic rigging does not store energy inside the entire loaded line in the unlikely event that the final holding strand chafes through or snaps, the split pieces become a limp noodle of frayed rope, not dangerous in themselves.
So, synthetic rigging wins again.
That is very true! One of my dads friends lost an eye (luckily that was all he lost) when that exact situation happened to him.
Hello Herb.I know you're a Dyneema a purist...that said, how would you feel about Dyneema combined with SS turnbuckles for tuning and ease. This appeals to my lazy nature and brings the thought of switching to Dyneema a little closer? Be well.
That works very well! It’s actually the ideal setup, just too expensive for us to have. Each turnbuckle costs us $100 and we have 12 stays! We have turnbuckles on the two headstays, the other 10 are purely lashings to save us $1000!
does that mean that parts like chain plates need a replacement too?
They need replacement every 10 years.
Would 10mm dyneema be sufficient for a 42ft'er? Says its breaking strain is 10.7 ton
It depends on a whole bunch of factors. I can do the math for you, my consult fee is $120.
If you want to figure it out yourself, look at the RM30 value for your boat as that is the maximum rig load your boat will experience.
What about the cost of the synthetic rigging compared to steel rigging?
If you do it yourself: cheaper. If you pay to have it done: a little more expensive.
Great content as ever Herb. I remember from a video, posted sometime in the last year, you mentioned that you were considering changing out the synthetic tensioning method for turnbuckles. Is that still the plan or have you changed your mind? I guess turnbuckles would make tuning quicker/easier, but if you're only tuning once every 3 years, speed and ease is not much of an issue :) Interested in your thoughts. Also, do you (or viewers) know what insurance companies think of synthetic rigging? Un-insurable? Insurable with the same 10y/10k nm re-rig caveat?
Insurance companies don’t care what you are rigged with as long as it’s 10y or 10,000nm.
I would like to have turnbuckles but they cost about $100 each, so I’m going to keep deadeyes and $1000 in my pocket. I made the headstays turnbuckles because it was a pain to get the tensioning lines rigged up their and it was only two of them.
If someone can afford turnbuckles, the combination of deadeye to take up the slack and creep with a turnbuckle below will be ideal!
does it work with a furling genoa as well? What about the initial cost?
Initial cost is cheaper IF you do it yourself. It’s easy but time consuming to make, so if you are paying someone by the hour, it can be as expensive as steel rigging.
I have some ideas about how to make it work inside a furler but I haven’t tested them yet to say if it works or not.
What about the salt crystals imbedded in the line from sea spray?
Does that wear on the strands?
We haven’t seen any evidence of that
I see that windage has come up tangentially so far, but to address it directly: have you found any practical difference between the synthetic and a steel rig in terms of things like weathering bad storms and high winds? Not being a racer, my primary windage concern is that drag in a blow, especially in our increasingly wild weather world.
Cheers!
We have hove to in really high winds (we stopped sailing and started heaving to when the winds hit 60 knots). It wasn’t fun because of the present situation but we weren’t heeled over anything ridiculous. There is additional windage but the reduction in weight aloft helps keep the boat upright. I would say that our tiny trysail was the biggest windage in the rig and had us heeled over between 10-15° during the storm.
Not having a furled headsail is the biggest decrease in windage in a blow. When we switched and had our first squall, that was the biggest thing we noticed. The bow was no longer pulled along by the wind like it used to.
Thanks for the video, very good overview.
So .. do I lose my furler or do I just keep the forestay metal?
Right now, you can replace all the other stays in Dyneema and keep the furler on a metal stay if you wanted to convert and keep the furler.
I’m working on a few ideas to make Dyneema work inside a furler but I haven’t tested them yet to say if it works or not.
@@RiggingDoctor Please keep working on that.
@@RiggingDoctor if you have the time when you are back in St Augustine you can use mine to toss around ideas.
If you want to keep the furler on the headstay and have the advantage of light synthetic then go with antitorsional cable and continuous furler, you will be only able to set the jib full in or full out and eventually drop it because it’s hanked on. I’ll go that way on my next boat. Great vid Herb, keep sharing all your knowledge on synthetic rigging, it’s a pleasure to appraise that much from you, thank you!
Hey guys, I got a question that just popped into my brain. It may sound stupid but here we/I go. Can you mix wire standing rigging with synthetic, not on the soma line? Like for instance, I need to change out a wire rigging on my boat bc it broke (yes, Mast still up, broke on the hard during a hurricane). I want to change all the rigging to synthetic, but don't have the cash to do it all at once. So, one at a time? I know its crazy and probably not, but had to ask.
You can mix and match, but you need to do one side of the mast at a time.
So, forward lowers, aft lower, and cap shrouds at the same time on that side of the mast.
For example, port in steel starboard in Dyneema.
Can you reference the 10 year limit on SS rigging. I would love to see the numbers and how that was determined. I know insurance companies quote the 10 years, but that is for their liability thanks
It’s because by 10 years, stress cracks will have formed somewhere in the rig. This is why insurance companies want their rigs replaced at 10 years to reduce the number of claims they have to deal with.
@@RiggingDoctor i get all that, but where is the evidence of this? Has someone done testing?
It’s not so much from tests but just historical data of the age of rigging when problems have arises. From this, the insurance companies have done their calculations and risk assessments to determine that 10 years is a safe bet for them.
@@RiggingDoctor, I agree, but to clarify, the usual way insurance companies do their "investigation" is around the loss of money -- simply that. If they have numerous claims and find out that their client has not done new rigging for many years/nm, they simply draw a line such that almost all of their client's claims fall on the wrong side to save their business. Thus, if you have insurance and expect some reassurance, you are forced to re-rig, although your rig may not have been subject to terrible forces or any significant corrosion. Just my two cents. Cheers.
We don't have that where we're from. Insurance companies don't care when the rigging is replaced. If it fails, the insurance payout is affected by the age, though. Insurance companies have guides for checking the rigging, and when to replace it. The checks boils down to about broken strands, rust/oxidation, kinks in the wire, cracks or enlonged holes in the eyelets. Broken chainplates or missing pins is the reasons I've heard that rigs are coming down, and our rigging is as old as our boats.
Would hemp rope be the best natural rigging material?
Yes, if by natural you are referring to “plant grown” and not mined metal. Steel is iron and carbon, not exactly something you would find lying around in the ground is vast quantities. Dyneema is absolutely synthetic, as it was designed in a lab.
How can I find how much tension I should use in my rigging is my question now that I have materials together?????
It depends on the type of rig and if the spreaders are lateral or aft swept. Aft swept need to be tensioned to 25% of your wires breaking strength while lateral can be much looser. The target for lateral spreader rigs is 15-20% of the wires breaking strength, depending on a few factors.
As the wire gets thicker, its breaking strength increases and so does the minimum tension.
@@RiggingDoctor Can I use whichever spreader I choose? Boat has no mast at the moment. I'm thinking of one from a hobie 18
Also, what type of tension guage is used on dyneema if it is also different?
So, look up the folding rule method and the percent elongation at breaking strength for the dyneema you’re using to calculate your ratio to use with the folding rule
Sure whichever stay is fine
Hey Herb, I was wondering and want to ask this for a long time, cose i have n abandoned boat i'd like to Re Rig, and thautgh abour Dyneema, but i fund realy hard to find sellers in france and was looking towards Marlow in UK, but they have dome different products like D20, SK 78 and SK99, each with different specs, what uou used, or recomend for a cruising sailboat? thanks for all thin knowledge =)
We used heat set SK78 for our standing rigging and and our inner forestay is DM20.
DM20 is better than SK78 and SK99, but it’s also more expensive. For the price, heat set SK78 is a less expensive and very good.
@@RiggingDoctor thanks again
What about the forestay with a hank on sail?
Chafe sleeve over the stay and soft hanks for the sail
@@RiggingDoctor awesome I'll order some up! These Hanks look tired anyways! Going to rig up a 1990 West wight potter 19 with dyneema. Might be the only one ever rigged that way!
A very important aspect of the synthetic rig is the thermal expansion, hot days and cold nights make it not suitable. Am I right?
I wouldn’t say not suitable because we have been sailing with it in very varied climates. It’s just important to remember that it will slacken out when it gets cold so don’t have a full sail crash jibe in the evening!
It holds its tune +/-20°F, but we have been able to sail on shorter sails all the way down to -50°F from the tuning temperature without problem (tuned at 80°F and sailing with it very slack at 30°F).
I wouldn’t try beating in a gale with rigging that slack, but we were able to reach with success in the winter.
@@RiggingDoctor Seems the way to go. We will decide in a couple of years when going offshore. Tks for the info! Cheers
Excuse me if I missed this answered, but what is the relative direct cost between steel and Dyneema rigging (not allowing for the longer life).
Foot per foot, Dyneema is cheaper than wire, so if you do it yourself, Dyneema rigging is cheaper than steel rigging.
You're not going to mention what happens in the cold?
It expands.
What is the diameter of the various parts?
It depends on the application, but in our case: 9mm for the stays, deadeyes, and 5mm for the lashings.
Is it acceptable to use Amsteel Blue brand SK-75 line, or is it important to use Dynice Dux SK-75? How critical is the heat set feature of the Dux?
I used to believe that it was important but I have met people who rigged with Amsteel for a fraction of the price and it is working very well. It creeps a bit more in the beginning but then it settles down and works beautifully for less money.
I didn't hear you mention cold weather being a problem.... Is it still? Or have they made improvements to dyneema where you can use it reliably in cold weather?
It can be used but you just need to tighten it when it gets cold.
@@RiggingDoctor thank you, you guys are one of the few content creators that provide useful information for the genre. Thank you.
If you did it again, would you take DM20 instead? I think Dux is fairly reasonable over here if you buy 100 Meters at a time. What would you use with minimum creep?
We had a new metal inner forestay when I rerigged with dyneema (so I didn’t replace it at that time) that died on us in 2019 and I replaced with DM20. It is an incredible material but really pricey!
Creep on DM20 is significantly lower than creep from heat set SK78.
All this said, I have met two people with 40+ foot boats that rigged with Amsteel Blue (not heat set). It is significantly cheaper so they simply went way oversized and have minimal issues with creep.
So, more expensive doesn’t always mean “the only way to do it”.
Would pvc pipe on the stays protect against chafe? Patrick Childress has a video on using it.to.protect sheets from chafe on strrl stays.
Yes*
*the pipe will protect against chafe caused by the sheets but it needs to be securely lashed to the stay so that it itself doesn’t cause chafe as it rolls around.
I have now seen so many pvc cracked into sections or lengthwise. May recommend Pex instead. If using pvc pick electrical conduit preferably schedule 80. Carefully chamfered ends plus chafe protection under for synthetic.
Just wondering about synthetic Vs rod rigging, how do they compare?
Rod has much lower wind resistance but the heads are very difficult to inspect. Synthetic is more windage but very easy to inspect.
That’s kind of the big difference between them. It gets down to nitty gritty stuff like weight and stuff, but that’s the general difference between the two.
Do you have Links to were to by dynema and accessories at a good price?
Not really. I buy Dyneema in bulk to get a discount and make all the associated parts from basic materials to keep costs down
What about headstays with furlers?
I’m still working on a way to make it work. I have the idea but I haven’t tested it properly yet.
@@RiggingDoctor Well, if all else is dyneea and only one is metal, that's not too bad. I have a friend in his 70's and he recommends thigh tensile gal. and basically the big diff. between it and s/s is looks I think.
Also the galvanized can leave discoloration streaks and, I understand, benefits from some different maintenance procedures.
@@gregorytremblay4913 HUH, thanks for that Greg. I am really only thinking about Dyneema, but are you saying that the gal stains the sails? and just out of curiosity, do you know any of the maintenance issues with it? I really thought that high tensile gal would be long term etc really good, just ugly.
Galvanized steel is actually really good for rigging, but the discoloration comes from the slurry you have to paint on it all the time to keep it from rusting. If it’s worm/parcel/served and then maintained wet with slurry religiously, the wire will still look like new at 50 years!
The problem is the slurry. I was about to rerig in galvanized when I figured out how to make Dyneema work, so I went with synthetic.
What about cost of initial set up Synthetic vs Steel ?
About the same if you don’t do it yourself, but if you do some yourself, synthetic is cheaper
Insurance companies requires that the standing riggin be replaced after 10 years, however they do not mention that it should be replaced after 10,000 miles. Where did you get this information? Thanks, Richard
The 10,000 miles is also based off of what insurance companies say
@@RiggingDoctor Which companies?
Boat US (Geico) and StateFarm. These are the two companies that I have personally had insurance with and that’s what they told me I needed.
@@RiggingDoctor Thanks a lot, very useful. Cheers
So .... how much would you charge to rig 37f' sloop?
I charge $300 per stay to fabricate the rigging, and $400 for a headstay, plus the cost of materials. Different rigs need different thicknesses of line which changes the price of materials, but my labor cost is fixed.
noticed on mine, temperature change affecting tension
Very much! As it cools it expands, then it shrinks back when it heats.
@@RiggingDoctor correct
@@RiggingDoctor That is rather interesting. Usually things expand when they heat up. Thanks for that information.
Excellent question. Thanks for asking!
@@RiggingDoctor Does the shrinking require loosening the rig? Pacific North West based our temperature swings are becoming radical. Had reached over 110°F on the water this year, switch back to freezing.
Oh, BTW, I didn't find out about your Zoom until 2hrs after. Sorry. Would have been in on that. Maddie, where's your bird, is it's name Charlie like Herbs but spelled different?
I got my bird in Florida and her name is Gerry so she hasn’t come into the videos yet
👍👍👍
Is Dux worth getting?
It’s overpriced. New England Ropes makes one that is the same thing for less money.
Where do you get this 10 year, 10,000 mile life from? I can show you many, many boats from the 1970's and 1980's with absolutely original standing rigging. In 35 years in the business as a Great Lakes marina manager I have only seen two catastrophic rigging failures and both of those were attributed to improper installation. How long do these synthetics stand up to sunlight? Chafe? I have seen chafe result in the failure of a 1/2" dock line during the course of one overnight gale. Nylon, not dyneema but my experience is that any loaded synthetic line will cut like butter if exposed to any sharp chafe. I'm not sure your advice is best for those who do not fully understand the rig, the rigging and the tune. Running rigging, dyneema for sure. The consequences of failure (other than hoisting humans and there should always be a redundant safety line) is minimal compared to the loss of a cap shroud etc.
I thought it was the insurance companies that state those numbers.
The Great Lakes are a special place, and the only place where time stands still for steel rigging. Oddly enough, when one of those boats leaves the lakes and enters the salty world, their rigging dies a miserable and rapid death!
Dyneema is actually very resistant (but not immune) to chafe. It takes a lot of effort and time to chafe through it, which is plenty of time to find and stop it from becoming a serious issue.
Nylon stretches a lot, which gives it excellent elasticity, but also generates a lot of heat which further degrades the fibers.
Dyneema has no elasticity, so it doesn’t heat itself up for a speedy death.
The 10 year, 10,000nm business is based on the findings from insurance companies. They like their bots to be rerigged at those two points to reduce the risk of claims. At 10 years in salty places where the boats remain rigged year round, stress cracks will have developed somewhere in the rig.
@@RiggingDoctor I used nylon as an example of chafe issues with synthetics. Dacron is similar. I guess my point is that you need to be sure of what is going on. Tough in the middle of the night in a gale. I am unaware of boats getting routinely rerigged during circumnavigation. Although my workplace was in the Great Lakes over the years many customers took their boats south for several years at a time and a couple completed circumnavigations. You still have not addressed the effect of continuous UV exposure. Swaged terminals can be a problem but I have not seen a catastrophic failure. I have seen broken strands. Stay-locs or Norseman facilitate inspection.
BTW no malice. I'm a fan :)
Boats should get rerigged but rarely do before something breaks after their first 10,000nm.
As for UV, I talked about it for a moment. The outer 0.1μm gets destroyed by UV and then protects the rest of the rope from any further damage. Long term testing by DSM has found no loss of strength from continuous UV exposure so it has been determined to be negligible.
Difference in price?
If you make it yourself it’s cheaper than steel
Your gonna need to replace it sooner than 10 years if your parrot keeps biting it! Hah
Haha! Bird damage is a major concern 😂
Thanks Herb. Cheaper install too?👍🏻
If you do it yourself it’s much cheaper to install
Appears to be parrot... resistant as well
Always a plus
👍!!!!
😎
RE:: CHAFFING HAVE YOU TRIED "BAGGYWRINKLES' ?
Fair aisle has a sweet set of baggy wrinkles on their boat!
No matter how long I am going to hear something; 'Baggywrikles'?
Is this sk75? and what dia is your main shrouds
It’s heat set SK75 and ours is 9mm
@@RiggingDoctor Are you telling me your main shrouds and backstays are only 9mm? I was told by a rigger, that the way he does it is to add 1mm dia to the existing s/s 1x19. But hey, don;t get me wrong, you have done it and it has taken you across the Atlantic and back.
Going 1mm bigger than steel is an easy “safe way” to figure out a size of Dyneema.
I did mine from the water up with calculations to figure out exactly how much force my rig would be subjected to and then found a line size that would meet my needs with a hefty safety factor.
Our rig is pretty short by modern standards so the loads are less intense on the rigging.
I have done rigging calculations for a variety of 30 foot boats and some can get by on 5mm stays while others with taller rigs need 9mm stays!
@@RiggingDoctor My main mast is only 13m, so the sail is probably only 12m and the foot is not as long as it could be.
I have Colligo 13mm heat set SK75 on my Island Packet 370. According to Colligo, dyneema is so strong that breaking strength is irrelevant. Size based on creep. So I have 8 stays with 13mm SK75 and 2 Furlers with SS. It’s feels beefy.
I provide links to many of your videos to my Marlinespike Seamanship lessons for the Hoofer Sailing Club. I created a playlist of the ones on UHMPE rigging for their use. Here is a link: th-cam.com/video/Az9NDlG3LMg/w-d-xo.html
Sweet playlist!
IMO you didn't address the primary advantage of Dyneema for a long term remote cruiser: you can carry a complete re-rig/repair kit with you. Hard to do that with steel.
That is an excellent point! We carry a 600’ spool in the lazarette, enough to do a full rerig and the spool weighs more than the line on it!
I consider a free standing mast a no brainer.................Standing rigging is a nuisance in every respect. There are numerous potential failure points (every connection, every chain plate, etc), any one of which can bring the mast down. With a suitable free standing mast you have NONE of the problems of standing rigging, and side step many of sailing the problems inherent in a stayed mast.
That’s why those boats are also called Freedom Rigs 😉
@@RiggingDoctor There are a lot of unstayed rigs other than the Freedom models…. and a lot to be said for them. Modern sailors seem to think that the triangular sail of the Bermuda rig, and it’s towering stayed mast is the ultimate rig for every purpose…. It is clearly NOT.
I agree! If the boat is built to support the mast, then you never have to worry about the rig anywhere you go! If you do have cable dependent rigging, then you are stuck choosing between different materials.
@@stonetoolcompany3649 ...and in small boats they are a blast. On bigger boats the masts have to be constructed very carefully. Often out of carbon fiber, mostly custom made at very high costs. This prohibits the use of these riggs for most of us.
I guess I have an older freedom rig, keel stepped boxed Spruce main, deck stepped mizzen. Cheaper than carbon one can assume without checking, actually amazingly light.
The stupid birds really distract from your great presentation.
Not sure whether to feel complimented or offended
@@RiggingDoctor It was meant as a compliment.
Thanks :)
Think you've got one to many zeros in your explanation of 0.1 micrometres, 1x10^-7. Otherwise thank you!
It could be! 1μm = 0.001mm, either way, it’s insignificant in line that is several millimeters thick.
@@RiggingDoctor yep completely agree, it was just that the text didn't agree with what you were saying :-)!
do you even listen to yourself? where do you dream this horse crap up at?
think about it. every single year, for hundreds, if not thousands of years, folks have sailed around the world. I doubt anybody in the past 100 years has replaced their steel rigging half way through, let alone everybody.
wow, you have bumped your head.
rather than to continue to give bad advice to folks new to the concept of sailing, how about just getting a job and earn an honest living.
People who sail around the world are sailing with rigging that is on borrowed time. Prudent sailors will inspect their rigging and replace it accordingly.
The reason people don’t replace their rigging in a timely manner is mostly due to ignorance of the need. My goal is to educate and inform new sailors as well as more experienced sailors such as yourself who do not know how often their rigging needs replacing.
Seriously rude.
Here we have a classic example of "Disagreeing on the internet: you're doing it wrong."
🤣
@@RiggingDoctor here's your history lesson:
we grew up, centuries, meliniums ago with rope, mostly Hemp rope to be exact, most commonly made from marijuana stems.
the rope frayed and chaffed, and deteriorated with the elements. therefore where eventually (for the most part) replaced with galvanized, and then stainless steel. the rope is more forgiving do to it's slight elasticity. yet had a shorter life expectancy, and a higher error ratio.
unless grossly inadequate, such as regional coastal cruiser, crossing oceans in troubled weather/ water, it does not wear out or destroy otherwise healthy steel rigging.
you are partially right, dynema is a better rigging, for reducing stress on the overall rig, and being more forgiving in one sense. it is a bit more forgiving than adequate steel rigging, but as you mentioned, without careful and constant caution (and a measure of good luck) it can and will chaff with minimal contact of foriegn (to it) repeated contact. At sea, in hazardous conditions, when visibility is poor, and attention is focused on situations other than the rigging is no time to have chaff and a falling mast with broken dynema.
no doubt there are circumstances, probably many, if not most, that dynema is a worthwhile and completely intelligent option with minimal risks, likewise the best option.
but steel needing replaced every six months and X number of miles, or however you put it, its full on, flat out nonsense. bull crap, and creating a danger to those that take your advice without knowing better.