I watched somewhere around 10 videos before i found this one. This is the best video by far yet. Easy to see what's happening and very well explained. Thanks a lot. You saved me a trip to the mechanic 👍
@@asadfirm0001 You need to remove the 2 bolts , hang the caliper then you remove the pads. For the front brake you can compress the piston but the back brakes you need to push and screw them with a special tool, in my case I used a grinder spanner key as hack, instead of buying a kit.hehehe
@@asadfirm0001 I'm contemplating getting an older pajero model with high km , I was curious about the difficulty level to change the pads on it, thanks for the video 👍Its a cool car
No it won't, same thing as using a clamp to push it back, but we show simplest way possible rather than using tools that may be impossible to find in other places.
@@asadfirm0001Ok cool. Yea I think I'll rather use a g-clamp and the old break pad to push them back in. I definitely see this method is simpler, but knowing me, I'd probably end up scratching or damaging something in there. ;-)
it would be smart to use proper tools like brake piston compressor tool, rubber hammer and brake cleaner spray to clean the brake parts before installing new brake pads. And clean the engine bay before taking this video tutorial.
Wonderful way to ruin your abs unit! Never push pistons back without loosening bleed nipple and let fluid go into container and when pistons are back far enough tighten nipple. Top up brake fluid.
I watched somewhere around 10 videos before i found this one. This is the best video by far yet. Easy to see what's happening and very well explained. Thanks a lot. You saved me a trip to the mechanic 👍
Wow, means a lot to us and really appreciate it, glad this video helped you! Thanks for the nice feedback.
very helpful, all details and description are all clear - thanks.
Helpful video, thank you
Glad it was helpful, thanks for the kind words.
The easiest process I have seen so far compare to other vehicles such as Eg. hyundai accent 2014
Hyundai accent has different procedure?
@@asadfirm0001 You need to remove the 2 bolts , hang the caliper then you remove the pads. For the front brake you can compress the piston but the back brakes you need to push and screw them with a special tool, in my case I used a grinder spanner key as hack, instead of buying a kit.hehehe
Wow that sounds interesting, haha I'd like to see one accent and try this out xD
@@asadfirm0001 I'm contemplating getting an older pajero model with high km , I was curious about the difficulty level to change the pads on it, thanks for the video 👍Its a cool car
Parts are easy to find too depending on your country, and the fundamentals are also quiet basic compare to other cars
Thanks. Very helpful. Everything I needed to know.
Glad it helped you, thank you as well
Thank you very much , I need the video for th3 front brake pads
Welcome glad it helped you!
Extremely helpful , thankyouuuu
Thank you Amr!
Nice keep them coming !!
Thank you Faisal Teasers!!
03:14 Won't this method damage the break rotor? I"ve seen a method where you can use a clamp and a small piece of wood to push those back
No it won't, same thing as using a clamp to push it back, but we show simplest way possible rather than using tools that may be impossible to find in other places.
@@asadfirm0001Ok cool. Yea I think I'll rather use a g-clamp and the old break pad to push them back in. I definitely see this method is simpler, but knowing me, I'd probably end up scratching or damaging something in there. ;-)
Yeah better not damaging anything 😂 good method too, use the old break pads and push the pistons back.
Do a video of the proper way to raise up the Pajero with the jack please. Where you should put it, etc. Nobody did this.
Thank you and will do it in coming week hopefully and tag you!
I can send pictures where is the jacking points
من لكنة كلامك اظن انك عربي
ارجو رفع فديوهات اكثر بخصوص الباجيرو
تحياتي لك
Please do a tutorial on how to bleed brakes
We will do soon!
Can you please post a video for how to change gear box in 2006 rav4
No problem we will do it soon and keep you posted!
All pajero model has 2 brake pads?
Yes sir
Owaa its very useful
it would be smart to use proper tools like brake piston compressor tool, rubber hammer and brake cleaner spray to clean the brake parts before installing new brake pads. And clean the engine bay before taking this video tutorial.
Wonderful way to ruin your abs unit! Never push pistons back without loosening bleed nipple and let fluid go into container and when pistons are back far enough tighten nipple. Top up brake fluid.
You forgot the grease
That's if the caliper is old and rusted