Oberon Levers ! Install and review. Great for Arthritis or painful hands.
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2024
- Join me as we install Oberon Adjustable Levers on the road glide
You can get your levers here from a reliable source at @TuckerSpeed477
tuckerspeed.com/products/ober...
Using this link is an affiliate link for Tucker speed. We get a small % bonus for you using this link. We appreciate you supporting us while supporting local small businesses.
🔥 please subscribe if this video was of help🔥
#boostedbrad #Deathmetalracing #thrashinsupply #diy #hd #roadglide #badboyzcyclez #CustomDynamics #Tuckerspeed #harleydavidson #nicecnc
Let’s connect on other socials:
FB - profile.php?...
Instagram - roadglide_gimp?...
TikTok - www.tiktok.com/@the_road_glid...
**2018 road glide special**
#HarleyDavidson 107 - 114 big bore kit
#WoodPerformance 22XE high torque cam
#SS cam chest internals and pushrods
#HPI 58mm throttle body and manifold
#ArlenNess method clear air sucker
#CustomDynamics low profile bag lights
tri bar light
front halo inserts
windshield fairing trim lighting
strobe module
Lower fairing inserts
#AdvanBlack Chin spoiler
#MemphisShades 8” blacked sport curved windshield
#FuelMoto jackpot 2-1-2 hi-output headpipe with jackpot rtx mufflers
#thundermax ECM Tuner
#ohlinsusa HD044 rear suspension and nix 22 front fork cartridge kit.
#badboyzcyclez freedom series custom seat.
#KSTKustoms speerhead bars
#ThrashinSupply foot controls
#DeathMetalRacing floorboards
#FloMotorsports billet foot controls
#Trask check M8 / transmission vent case
#rekluse hydraulic slave cylinder
#SoundstreamReserve HDHU.14+
#bajadesigns LP6 headlights
#Oberon C400’adjustable Levers
#nicecnc clear derby cover / clear transmission cover - ยานยนต์และพาหนะ
![[TH] GEN vs SEN | FPX vs TH - VALORANT Champions 2024 DAY 1](http://i.ytimg.com/vi/VcyH-0LAlhs/mqdefault.jpg)
You can get your levers here from a reliable source. #TuckerSpeed.
tuckerspeed.com/products/oberon-performance-adjustable-lever-set?sca_ref=4219620.jpzWsUsGYV
Using this link is an affiliate link for Tucker speed. We get a small % bonus for you using this link. We appreciate you supporting us while supporting local small businesses.
Thx for the info. I ordered them directly from Oberon's website in the U.K., Saturday, April 13th and they just arrived at my house on April 16th! 4 days international shipping at the same price as the U.S. retailers! I recommend buying directly from OBERON!
That is awesome. I would agree with you. If you’re able to order direct from them. That’s the way to go. These levers are worth their weight in gold in my opinion
Same here ordered them direct & just took a few days. I was shocked at how fast .
The levers look amazing. I actually just contacted tucker speed regarding a set of these for my 2016 Softail Slim s. Amazing bunch of professionals with that company. Looking forward to getting them in and riding.
Thanks for this, I just purchased from your suggested vendor!
That’s great! You will be happy with them. I’ll never go back to any other grips
Thanks for the video. Mine took about a month to get. I purchased the clucth lever anodized black with the blue aduster. I put it on my 2016 Road glide special. About a 5 minute install. Paid for itself after the first ride. What a great product and design. Way better clucth control and a lot more comfortable on the hand. I highly recommend this product. This is Dave from Grass Valley Ca.
Agree with you. 100%. They’re absolutely worth every penny. Craftsmanship down to performance. You can tell they didn’t cut any corners on research and development all the way to production
As always great video !!!!!!
Thank you, Dave. Appreciate the positive feedback and support 🤘🏻 yall the real MVP’s for coming back and supporting the channel
On my third video man I’m enjoying what you putting together keep them installments coming I’m learning something I’m gonna order me some of those levers keep the video coming
Right on, Mike! Glad you’re enjoying the videos. Glad to see the hard work and money spent is helping others 🤘🏻🙌🏻
Bought a pair about a year ago! Love them!
They’re definitely well made and not priced too high for what they are.
You do great contents and keep it up thanks
Thank you. Appreciate the positive feedback 🤘🏻♥️💛
Have them for years and they are great. I can’t buy a 2024 until Oberon comes out with its clutch lever.
That’s what I like to hear 🤘🏻
Those Oberon levers are sick. Now the theme of your bike makes sense. 🎉🎉🎉🎉🎉GOOOO 49ERS. 🎉🎉🎉🎉🎉🎉🎉🎉
My man 🤘🏻👊🏻 tomorrow is gonna be hectic! Lol. Let’s go faithful
LETS GOOOOOO NINERS@@Gimps_Garage
Gotta give credit to modern engineering,, The process would have been a nightmare on my old bike. Those look totally sweet brother.
The video just makes it look easy and fast lol jk. It’s not a terrible install.
Looks good. Gonna look into a set for my road glide
You definitely won’t be disappointed
Looks great
Thank you, John! I’m happy with them for sure
Looks really nice 👍🏾
Thanks brotha
Same exact story on the unnamed dealer, that being said, these levers are a game changer for sure.
Yeah. It seems like they have a big track record of screwing people over. Glad you got yours sorted out 🤘🏻
Those are sick!
They really are. They’re very well made. They look really good. The anodized quality is really good. They did a good job on these
I have psoriatic arthritis in my wrist and hands, so I am definitely gonna look into these levers.
You’ll love them if you have severe joint pain and stiffness in your hands like I do.
Just got a set of these myself. Great install video sir. Where did you get ur clutch/brake caps from? Those look great as well.
They were from NiceCnc. But I wouldn’t recommend using them. Unless you reuse your gaskets. Don’t use the gaskets they send. They will warp and melt. Mine leaked brake fluid all over the damn place because of the failure.
They look great glad I found your channel and subscribed as well. Need these for my road glide for sure. .. where did you get the reservoir covers from .... need the orange flavor.
I’m also glad you found the channel. We’re happy to have ya here 🤘🏻 there’s a playlist of videos on my channel that shows the gold components I’ve added.
th-cam.com/play/PLBMoyUofAHJijSp3i53lmN4FAE1wZxTtI.html&si=IakGLWwvt1royjkk
Hell yea bro i have the same gold levers with black adjusters on my snake venom rgs I really like them alot
Nice! Yeah they’ll be great for my arthritic hands
Love the snake venom paint. I couldn't find a rgs in snake venom so I ended up with gunship gray, which I really like as well.
Or order them direct. I ordered from oberon in the UK on Friday, and they are expected to arrive tomorrow (Monday). They were slightly cheaper than Tucker even with shipping costs and tucker's less time says 4-6 weeks.
Really comes down to the BP to USD that day as well. But yeah, if you can buy direct from Oberon. That’s the way to go.
This lever works with a neutral switch where you can engage on gear?
Softbrake also makes shortened pull levers for that hydraulic clutch and brake pedal arms
I had that and it’s a life saver
Awesome. I'm def getting some for my bike
They’re really great. Can’t wait for the snow to chill and stop. So I can go ride. I’ve done a lot to this bike over the last month and haven’t been able to ride since Xmas day. 😞
@@Gimps_Garage outside of Philly here and it's been a relatively mild winter. I've gotten in way more rides than normal. This weekend in the upper 50s/low 60s so I'll be riding for sure
@@MacRides1 damn. I would love for a 60° day here. We’re lucky to stay above 30° here and no snow. But I agree. The winter has been mild compared to recent years
Thinking about getting these
Oh man they’re so easy to swap on the hydraulic clutch 18-20 model years
Cable clutch got that damn spring to deal with
Definitely recommend them. Spent 3 hours on the bike yesterday. First decent day we’ve had since installing them. Absolute night and day difference in performance and comfortability
Look great. My hands are all jacked up as well. How are you liking them after two months?
Loving them. Will never be able to use anything else from here on out.
Great video 👏🏻
What bars are you rocking there, fancy some like that on my Slim
Cheers
@@tentipiwildcamping the ones in the video are the 16” KST Kustoms spearheads. I now have Kraus Wolf One Pro - T bars and they are much better imo than apes.
All I want is a set in solid brass.
That would be cool. I know they do a set of raw. Idk how hard it would be to anodized it in brass.
They look fantastic. Where did you get your gold Master Cylinder cover and Front brake Master cylinder cover??
Thanks brother 🤘🏻👊🏻 I got them from www.nicecnc.com. They’re very well made. Nice machined billet aluminum.
They’re shown in detail in one of the videos here.
th-cam.com/play/PLBMoyUofAHJijSp3i53lmN4FAE1wZxTtI.html&si=he3VgAWwuUre1L4v
@@Gimps_Garage thanks Man, I'll check it out
@@dabeard_ you’re most welcome
Running them for almost a year now. I like them, but settings 1-2 are useless on the hydraulic clutch setup. They are way too close to get the beginning of the friction zone and full release. 3-4 are the sweet spot.
I agree with you 100% on this with a hyd clutch.
I have a 2023 cvo road glide. Would you be able to find out if they can fit the bike. And do you know anyone who has put them on their Cvo. Regards Robert
Everything I’m seeing online says “these may not fit CVO models. Please contact us before ordering”. I would personally email Oberon directly and ask them. They are very good and quick at responding to emails.
I had the same problem, was it a company that starts with an S and K?
Correct
I bet it was SpeedKings right?
There’s zero possibility that the answer is no lol
I live in Australia and no one knows anything.Regards Robert
Does the shade of gold that the Oberon levers are match the shade of gold on your Ohlens suspension reservoir???
Yes. It’s very close. It’s like a honey gold almost.
Ok great. Mine just got delivered. I’ve been waiting since thanksgiving. Your setup looks great.
@@javiriojas6463 thanks man. I appreciate it. Definitely have spent lot of time and money getting it to where it’s at. But through all the BS with some of it. It’s definitely been worth the effort. Also, #BoostedBrad / #DeathMetalRacing makes some sweet gold levers in two different shades of gold. You could check his out.
Great video thx . I installed mine the other day. The clutch works but now it won’t start in gear when pulling the clutch . Any ideas ? Thx
Your switch is being compressed. So try and move it out a notch or two with the dial. It might be engaging that switch. If moving the dial doesn’t work. Take the lever back out and reinstall it and just make sure the switch in the master cylinder is sitting flush down in the recess in the lever
Thanks for the info . Il definitely try that .
I’ve noticed that anything below setting 3, is too close and it will engage the clutch. 4 is perfect for me. 3 is good if I’m on freeway / highway cruising. Sometimes I’ll switch it from 4 to 3.
@@Gimps_Garage I’m going to go try a different setting now lol.
@@Gimps_Garagethat worked . Thanks for the help 🎉
What brand is that seat? Do you have a video on it? Thanks
I do have a video. It’s the freedom series seat from badboyz cyclez.
th-cam.com/video/f6t39E4cyAg/w-d-xo.htmlsi=8JsoYDfNEVWYHqcq
Just found it! Thanks.
Question, if the clutch lever is too close to you, then could that create a problem with not enough level pull range to properly disengage the clutch? Or does the bike creep forward when in first gear if the clutch level is set to position 1?
Great question. The friction zone is definitely very close when it’s at its lowest setting (1). You barely let it out and it’s going. Setting (4) is considered stock length. It’s perfect at (3) for me.
@@Gimps_Garage nice, and the pull is also lighter?
@@RickyG512 it’s smoother. Idk about lighter. Also gotta factor in if you’ve done any mods to your clutch basket, plates or springs. I have the AIM SDR max on my clutch and it’s a lot harder to engage. So I added the Rekluse slave cylinder. Which helped quite a bit with the pull.
I’ve had a set for several years and had a problem with clutch engagement. I was looking for levers that would be closer to the grips. I ran them on settings 1,2,3 and 4 (which is according to Oberon is the stock setting) and had creep edge problems. Now I run them at 6 and no problems. I like the feel of them and will keep them. Yes, I did clutch adjustments.
@timkeane7469 thank you for sharing your experiences. I notice engagement creep on 2. I can’t even start it on 1. 4 is perfect for me
Or you can buy direct.
They didn’t have that option when the video was made. But im happy they’re offering that option to buyers
Is the CNC stuff match up to the same gold as the oberon levers?
They are very very close. I’m colorblind so I don’t see a difference if there is one. But another friend of mine said “it’s crazy you got all these gold components from various brands and they all managed to match”. So I’m assuming they match lol.
Nice. They look like they match up to brake and clutch covers pretty well in video
The gold color matching up was my question too. Sounds like a good idea for a video.
@javiriojas6463 my buddy that lives down the street. Said that he was very surprised that because I bought almost all my gold components from different brands, that they all match up perfectly with each other.