FIXED mine without parts, I disassembled the controller and used 91% rubbing alcohol to clean the "conductive contacts" under the metal D-Pad plates. Then I cleaned the metal contact plates. put it back together and it worked superb! I still gave the video a like for the parts listing.
“I still gave the video a like for the parts listing” ... so you were wise enough to think: “Maybe if I take this sticker with four metal plates on it off for cleaning, then clean under them as well, then replace them, that’ll fix my problem!”, then you spontaneously came to this guys video to post your win, where he ironically suggests the same approach? No, you’re just riding on his coat tails with caps lock, ya narc. Glad you got your controller workin though
@@italianbasegard Actually i was giving credit to the poster for having useful information in the video. I did however watch the video first and came to the conclusion I would try to clean mine and check the results. I found out it worked fine and thought I would share information with others that may choose this route to fix their controller. THE CAPS may have been there to grab the attention of Someone needing a fixed controller but didn't have the funds to expend on parts.
If you D-Pad doesn't always register clicks, put your mouth over your d-pad and blow hard. Bit of random post but I'm putting this out there so that it is easy for people to find in the future because i found the information hidden in the comment section of a youtube video so credit for this fix goes to "Nerd Strangler." If you're D-Pad is not registering without you pressing really hard, try forming a seal over the d-pad with your mouth and blowing as hard as you can into it. It sound a bit weird and feels like a breathalyser test because the controller obviously isn't vacuum sealed. The reason for this is apparently a design fault where the controller uses carbon coated contacts for the metal switches (Carbon coated contacts are meant for rubber switches apparently) so the metal switches are grinding the carbon into dust and preventing electricity from conducting between the metal switches and the contact, therefore causing the d-pad to fail to register button presses. By blowing into the d-pad (if this is the problem you have) you should be able to clear the dust out from under the switches allowing the contacts to register properly again.
My controller was "for parts" until I saw this video. Thanks for showing the solution and a cheap fix. Saved a few dollars and got my D-Pad twerking just by peeling the original and cleaning the board and contacts as per TheTubejunky's comment below. It's Miller time! For anyone else attempting this, it is a major pain in the fudge chucker to get that board out without desoldering, even worse to reassemble. Tape your rumble packs so they aren't dangling around while you're trying to work. Good life advice in general.
Did this around a month ago after sourcing replacement pads from China, works a treat & brought my controller back to life. The controllers are a PITA to work with though, lol
My controller was a little different. Top and bottom board was connected with some wire. I don't solder so that added a slight degree of difficulty. Other than that, your videos worked were awesome. D Pad up is working again! Thanks!
Would have been nice if they designed the controller to have membrane buttons under the dpad like every other controller ever made. And also those plastic panels on the bottom, the tabs always break for me and the panels make a squeaky plastic noise with normal use. Third individual problem I have with the xbox one controller is the black foam pads on the bottom shell to make the triggers quiet (for me) get worn out. The xbox one controller from my two experiences with the original black and the slim white definitely aren't built as well as the 360 controllers.
Yea I never understood why they went over to tactile switches even other consoles and aftermarket controllers use this method as well, I use the d pad for beatemups especially the retro ones and although the newer dpads get special moves out just fine it feels weird having the d pad clicking away
I found IPA (not the tasty beer kind) good for cleaning lightly soiled boards. For the nasty sticky mess from spilt high sugar/caffeinated soft drinks then acetone is more effective. Or acetone based nail polish remover - if you're cheap like me. I've had more than one controller where the liquid got under the d-pad sticker and coated the carbon in gunk making the d-pad position not work.
Took TheOneAndOnly’s advice, cleaned the D-pad, and layered three pieces of electrical tape on the problem area (D-Up). Works perfectly! Although I did accidentally rip out the cables for the left rumble motor during the process… Time to get to soldering!
Update 2 years later: I had to throw out this Xbox One controller after attempting to solder because I ripped out one of the soldering pads. Bought a Series X controller and an electric desoldering iron/pump. Pot replacements couldn't be easier!
Wow! I didn't even know this was a replaceable part. At least as whole a "unit" as it is. I have a controller that the right on the D-Pad needed more "oomph" to register and all I did was cut to size a couple layers of electric tape. Nice to know about these replacements for future reference.
Thanks for the vid; idk what's wrong with mine but D up is dead most of the time and D left keeps do ui ble clicking; I'll probably get a new one but sounds like a fun diy project
Microsoft should have used regular rubber contacts. Even the Xbox 360's pad wasn't as bad as the Xbox One's and that's saying something. I should not have to buy replacement parts for a game controller I've only had for about 2 years and yet here I am, ordering those metal dome switches.
And to make things even more frustrating, a few months after fixing the pad it started having double click problems again. I even shaved the insulation off of the contacts and added little dabs of solder in a vain attempt to improve the contact, and it only fixed the problem temporarily. For any game that requires precise timed inputs the Xbox One's D-pad is awful because you never know when it's going to skip or repeat an input.
I have a fix that’s pretty cheap, cut some pieces of tape like pretty small pieces and place it behind the dpad button, I just used 1 inch plastic tape and covered the area with about 3 layers and now it clicks very well
I bought my xbox one s brand new, I've barely touched it because I assumed this was just a problem the xbox one s had in general. BRAND NEW controller and it has issues, sometimes it double presses, sometimes it doesn't press at all, big issue for the games I play (Celeste, Dark souls, things that require precision). Thank you for providing a fix but I'm still not happy with the fact that I actually have to do this when I shouldn't.
Hi, my xbox one controller is constantly locked in the dpad down position. All other buttons work fine. Physically, there doesn’t seem to be anything wrong with buttons or anything. I replaced the pads the same as you did, making sure I cleaned it with iso propyl alcohol but still, same thing still happening. Any ideas? Controller is almost new and Microsoft already sent a replacement but I'd love to be able to fix it. Seems to be an issue with the logic board
a little late but also noticed that the actual button has plastic tabs/towers underneath that press down on the contact - the plastic tabs are different heights but can get flattened out slightly so they dont apply enough force to acivate / stay suck or don't rebound. electrical tape layers seems to be the cheap fix - or new button plastic switch...
@@simoncossettini9680 That controller actually fixed itself up after a while. Down dpad button no longer pressed and I've been using it daily. Go figure
45 degree if your American. 90 to the rest of the world! Otherwise 9 /10 on the advice and repair. Umm thninking about it... 9.8 / 10 since you cleaned the contact before applying the membrane. Uber Micro Repairs approves this video! Nice one! sub and like!
Uber Micro Repairs thank you for the feedback. Clearly geometry is not one of my strongest subjects. It's also great to get the approval of a fellow repair technician. I wish you the best in all your future endeavors.
If one of my paddles from my xbox elite it works but it doesn´t sound click-click, can I cut one of these Button Metal Patch Button from your ebay link for make it ?
I have the series 1 elite controller and replaced the sticker on mine. I cleaned the board with alcohol/contact cleaner thoroughly before putting the new sticker on. I lined it up perfectly but am still having issues. I’ve replaced the sticker twice now. My up and left directions are problematic. Any suggestions?
a little late but also noticed that the actual button has plastic tabs/towers underneath that press down on the contact - the plastic tabs are different heights but can get flattened out slightly so they dont apply enough force to acivate / stay suck or don't rebound. electrical tape layers seems to be the cheap fix - or new button plastic switch...
XFiX I couldn't find anything there, maybe it's because I'm from the UK. I would like to thank you for the video. I've had this problem for way to long and didn't realise I just needed to swap out a sticker.
This is where I got mine from. Took a little while to arrive, but they did eventually. www.aliexpress.com/item/Controller-D-Pads-D-Pad-Metal-Dome-Snap-PCB-board-buttons-Conductive-fIlm-for-XBOXONE-Xbox/32815521518.html
So my problems, is that the bottom dpads just doesn't work at all.it clicks fine,but it doesn't respond, can anyone,e send some hello,or a link please?thanks
TheFookenSwank - If you D-Pad doesn't always register clicks, put your mouth over your d-pad and blow hard. Bit of random post but I'm putting this out there so that it is easy for people to find in the future because i found the information hidden in the comment section of a youtube video so credit for this fix goes to "Nerd Strangler." If you're D-Pad is not registering without you pressing really hard, try forming a seal over the d-pad with your mouth and blowing as hard as you can into it. It sound a bit weird and feels like a breathalyser test because the controller obviously isn't vacuum sealed. The reason for this is apparently a design fault where the controller uses carbon coated contacts for the metal switches (Carbon coated contacts are meant for rubber switches apparently) so the metal switches are grinding the carbon into dust and preventing electricity from conducting between the metal switches and the contact, therefore causing the d-pad to fail to register button presses. By blowing into the d-pad (if this is the problem you have) you should be able to clear the dust out from under the switches allowing the contacts to register properly again.
I did this today thinking it might fix my issue (right button on d pad requires significant pressure to work) - but no such luck. Also replaced the d pad itself as the plastic was worn down. Anyone any ideas what to troubleshoot next? (All was clean and gunk free after applying IPA before sticking on the new domes)
Same issue here. Have an elite series 1. Even went so far as to order a replacement top board (the one with the d pad on it), and still having the same issue... So either the board has the same defect which seems unlikely, or there's something else going on. May try and replace the bottom board (the one with the joysticks), but don't understand how that would affect anything... You ever figure it out?
If you want your dpad to work and have the same not clicking problem, don't waste money on the membrane sticky keys for your dpad. What I did was that my dpad had the down button stuck on so I took out the membrane keys , I lifted the down button with no tools just my fingers, put the membrane keys back, then It should work fine cause mine works fine , just some info on how to fix it without new membrane keys
If you’re having this issue in 2024+, just shake your controller. I really don’t know why but it works. If that doesn’t work, I suggest getting some electronic cleaner BEFORE you buy all this extra stuff
Replaced the dpad sticker like 3 times in month. Its like this piece of shit was designed to unshape the metal plates over the minimum stress. A little bit of hadoukens at street fighter and zombies grabs from resident evil and this shit becomes unresponsive all over again. Im not that ogre type of player, this shouldnt be happening at the rate it is. So f* disapointed.
FIXED mine without parts,
I disassembled the controller and used 91% rubbing alcohol to clean the "conductive contacts" under the metal D-Pad plates.
Then I cleaned the metal contact plates.
put it back together and it worked superb!
I still gave the video a like for the parts listing.
I did the same :)
Mine as well.
“I still gave the video a like for the parts listing” ... so you were wise enough to think: “Maybe if I take this sticker with four metal plates on it off for cleaning, then clean under them as well, then replace them, that’ll fix my problem!”, then you spontaneously came to this guys video to post your win, where he ironically suggests the same approach? No, you’re just riding on his coat tails with caps lock, ya narc. Glad you got your controller workin though
@@italianbasegard Actually i was giving credit to the poster for having useful information in the video. I did however watch the video first and came to the conclusion I would try to clean mine and check the results. I found out it worked fine and thought I would share information with others that may choose this route to fix their controller. THE CAPS may have been there to grab the attention of
Someone needing a fixed controller but didn't have the funds to expend on parts.
@@TheTubejunky Thanks for the info. Before ordering replacement parts I'll try this cleaning approach!!
If you D-Pad doesn't always register clicks, put your mouth over your d-pad and blow hard.
Bit of random post but I'm putting this out there so that it is easy for people to find in the future because i found the information hidden in the comment section of a youtube video so credit for this fix goes to "Nerd Strangler."
If you're D-Pad is not registering without you pressing really hard, try forming a seal over the d-pad with your mouth and blowing as hard as you can into it. It sound a bit weird and feels like a breathalyser test because the controller obviously isn't vacuum sealed.
The reason for this is apparently a design fault where the controller uses carbon coated contacts for the metal switches (Carbon coated contacts are meant for rubber switches apparently) so the metal switches are grinding the carbon into dust and preventing electricity from conducting between the metal switches and the contact, therefore causing the d-pad to fail to register button presses.
By blowing into the d-pad (if this is the problem you have) you should be able to clear the dust out from under the switches allowing the contacts to register properly again.
{K} thank you this helped
Worked for me right away thank you
Dog you saved my life
Thx for the tip it worked on my controller
Kwaylsky analisis
My controller was "for parts" until I saw this video. Thanks for showing the solution and a cheap fix. Saved a few dollars and got my D-Pad twerking just by peeling the original and cleaning the board and contacts as per TheTubejunky's comment below. It's Miller time!
For anyone else attempting this, it is a major pain in the fudge chucker to get that board out without desoldering, even worse to reassemble. Tape your rumble packs so they aren't dangling around while you're trying to work. Good life advice in general.
I love you
Did this around a month ago after sourcing replacement pads from China, works a treat & brought my controller back to life.
The controllers are a PITA to work with though, lol
They're easy compared to most other controllers
My controller was a little different. Top and bottom board was connected with some wire. I don't solder so that added a slight degree of difficulty. Other than that, your videos worked were awesome. D Pad up is working again! Thanks!
My problem is when I click on the up for my d pad it continues to go up
Same how did you fix this
This should help u th-cam.com/video/OXFECDhlMEE/w-d-xo.html
@Lofi Beats look at the link
@@kianigoe8254 look at the link
Same for mine.
Would have been nice if they designed the controller to have membrane buttons under the dpad like every other controller ever made. And also those plastic panels on the bottom, the tabs always break for me and the panels make a squeaky plastic noise with normal use. Third individual problem I have with the xbox one controller is the black foam pads on the bottom shell to make the triggers quiet (for me) get worn out. The xbox one controller from my two experiences with the original black and the slim white definitely aren't built as well as the 360 controllers.
Yea I never understood why they went over to tactile switches even other consoles and aftermarket controllers use this method as well, I use the d pad for beatemups especially the retro ones and although the newer dpads get special moves out just fine it feels weird having the d pad clicking away
He'll no!
Go use a 360 controller instead.
Dome switches > membrane
I found IPA (not the tasty beer kind) good for cleaning lightly soiled boards. For the nasty sticky mess from spilt high sugar/caffeinated soft drinks then acetone is more effective. Or acetone based nail polish remover - if you're cheap like me. I've had more than one controller where the liquid got under the d-pad sticker and coated the carbon in gunk making the d-pad position not work.
Took TheOneAndOnly’s advice, cleaned the D-pad, and layered three pieces of electrical tape on the problem area (D-Up).
Works perfectly! Although I did accidentally rip out the cables for the left rumble motor during the process… Time to get to soldering!
Update 2 years later:
I had to throw out this Xbox One controller after attempting to solder because I ripped out one of the soldering pads.
Bought a Series X controller and an electric desoldering iron/pump. Pot replacements couldn't be easier!
Wow!
I didn't even know this was a replaceable part. At least as whole a "unit" as it is. I have a controller that the right on the D-Pad needed more "oomph" to register and all I did was cut to size a couple layers of electric tape. Nice to know about these replacements for future reference.
Every handy tech savvy guy on TH-cam is always married. Just an observation
Where/how can I install the color mods for the home button LED?
This is my most recent video on replacing the controller LED:
th-cam.com/video/b0wgqyfCbHU/w-d-xo.html
Thanks for the vid; idk what's wrong with mine but D up is dead most of the time and D left keeps do ui ble clicking; I'll probably get a new one but sounds like a fun diy project
Microsoft should have used regular rubber contacts. Even the Xbox 360's pad wasn't as bad as the Xbox One's and that's saying something. I should not have to buy replacement parts for a game controller I've only had for about 2 years and yet here I am, ordering those metal dome switches.
And to make things even more frustrating, a few months after fixing the pad it started having double click problems again. I even shaved the insulation off of the contacts and added little dabs of solder in a vain attempt to improve the contact, and it only fixed the problem temporarily. For any game that requires precise timed inputs the Xbox One's D-pad is awful because you never know when it's going to skip or repeat an input.
What is that software you used to diagnose the controller? Would be a very helpful tool.
"Game Controller Tester" app. It's freely available directly from the Xbox One store.
I have a fix that’s pretty cheap, cut some pieces of tape like pretty small pieces and place it behind the dpad button, I just used 1 inch plastic tape and covered the area with about 3 layers and now it clicks very well
Thanks. Are those thumbsticks a little slippier than the originals?
I bought my xbox one s brand new, I've barely touched it because I assumed this was just a problem the xbox one s had in general. BRAND NEW controller and it has issues, sometimes it double presses, sometimes it doesn't press at all, big issue for the games I play (Celeste, Dark souls, things that require precision). Thank you for providing a fix but I'm still not happy with the fact that I actually have to do this when I shouldn't.
Do u still fix controllers
Can i fix this without ordering those ?
Hi, my xbox one controller is constantly locked in the dpad down position. All other buttons work fine. Physically, there doesn’t seem to be anything wrong with buttons or anything. I replaced the pads the same as you did, making sure I cleaned it with iso propyl alcohol but still, same thing still happening. Any ideas?
Controller is almost new and Microsoft already sent a replacement but I'd love to be able to fix it. Seems to be an issue with the logic board
a little late but also noticed that the actual button has plastic tabs/towers underneath that press down on the contact - the plastic tabs are different heights but can get flattened out slightly so they dont apply enough force to acivate / stay suck or don't rebound. electrical tape layers seems to be the cheap fix - or new button plastic switch...
@@simoncossettini9680 That controller actually fixed itself up after a while. Down dpad button no longer pressed and I've been using it daily. Go figure
45 degree if your American. 90 to the rest of the world! Otherwise 9 /10 on the advice and repair. Umm thninking about it... 9.8 / 10 since you cleaned the contact before applying the membrane. Uber Micro Repairs approves this video! Nice one! sub and like!
Uber Micro Repairs thank you for the feedback. Clearly geometry is not one of my strongest subjects. It's also great to get the approval of a fellow repair technician. I wish you the best in all your future endeavors.
If one of my paddles from my xbox elite it works but it doesn´t sound click-click, can I cut one of these Button Metal Patch Button from your ebay link for make it ?
I cant find 1 video without tearing my controller apart
Probably for a reason.. no magic pills for this repair lol
Exacly
I found them but does it work with the white 1708 model? It just model 1537.
My y botton and right dpad is not working any fix?
Great Tutorial thank you!
I have the series 1 elite controller and replaced the sticker on mine. I cleaned the board with alcohol/contact cleaner thoroughly before putting the new sticker on. I lined it up perfectly but am still having issues. I’ve replaced the sticker twice now. My up and left directions are problematic. Any suggestions?
a little late but also noticed that the actual button has plastic tabs/towers underneath that press down on the contact - the plastic tabs are different heights but can get flattened out slightly so they dont apply enough force to acivate / stay suck or don't rebound. electrical tape layers seems to be the cheap fix - or new button plastic switch...
Does this also work for the Xbox One S controller?
does this work on model 1697 lunar white ?
i found the sticker on ebay as Xbox One Controller - metal dome adhesive sticker for d-pad in case any one else couldn't find it.
infring1 cool, thanks for the feedback. I also put a link in the description but it will likely expire eventually.
XFiX I couldn't find anything there, maybe it's because I'm from the UK. I would like to thank you for the video. I've had this problem for way to long and didn't realise I just needed to swap out a sticker.
This is where I got mine from. Took a little while to arrive, but they did eventually.
www.aliexpress.com/item/Controller-D-Pads-D-Pad-Metal-Dome-Snap-PCB-board-buttons-Conductive-fIlm-for-XBOXONE-Xbox/32815521518.html
XFiX I NEED HELP PEOPLE can i take out my xbox one hard drive and put it in my xbox one x PLEASE SOMEONE TELL ME THANK YOU
bro, can u send me 1 of the 4 u got left over?
will this D-pad patches work on Xbox one S controller?
Yes
Not for me
my dpad up button doesnt click when it is pressed but it works
So my problems, is that the bottom dpads just doesn't work at all.it clicks fine,but it doesn't respond, can anyone,e send some hello,or a link please?thanks
TheFookenSwank - If you D-Pad doesn't always register clicks, put your mouth over your d-pad and blow hard.
Bit of random post but I'm putting this out there so that it is easy for people to find in the future because i found the information hidden in the comment section of a youtube video so credit for this fix goes to "Nerd Strangler."
If you're D-Pad is not registering without you pressing really hard, try forming a seal over the d-pad with your mouth and blowing as hard as you can into it. It sound a bit weird and feels like a breathalyser test because the controller obviously isn't vacuum sealed.
The reason for this is apparently a design fault where the controller uses carbon coated contacts for the metal switches (Carbon coated contacts are meant for rubber switches apparently) so the metal switches are grinding the carbon into dust and preventing electricity from conducting between the metal switches and the contact, therefore causing the d-pad to fail to register button presses.
By blowing into the d-pad (if this is the problem you have) you should be able to clear the dust out from under the switches allowing the contacts to register properly again.
@@Kariim21 cant believe that actually worked thank u so so much
@@Murkarie You´re welcome.
This issue is why I use a PS3 controller on PC instead of my $60 Xbox One controller I got on Christmas...
I did this today thinking it might fix my issue (right button on d pad requires significant pressure to work) - but no such luck. Also replaced the d pad itself as the plastic was worn down. Anyone any ideas what to troubleshoot next? (All was clean and gunk free after applying IPA before sticking on the new domes)
Same issue here. Have an elite series 1. Even went so far as to order a replacement top board (the one with the d pad on it), and still having the same issue... So either the board has the same defect which seems unlikely, or there's something else going on. May try and replace the bottom board (the one with the joysticks), but don't understand how that would affect anything... You ever figure it out?
@@f1o0k I didn't unfortunately. I called it a day and ordered a new one.
To anyone watching this it might not work but if your thumb pad is double clicking clicking I left it for a couple hours and it repaired itself
If you want your dpad to work and have the same not clicking problem, don't waste money on the membrane sticky keys for your dpad. What I did was that my dpad had the down button stuck on so I took out the membrane keys , I lifted the down button with no tools just my fingers, put the membrane keys back, then It should work fine cause mine works fine , just some info on how to fix it without new membrane keys
Where download software to controller
The app, Game Controller Tester, is free to download from the Xbox and Windows Store. It works on the Xbox One and Windows 10 PCs.
My controller automatically tbagging in MK11 and can't crouch block most of the time. FCK
No me funciono. Sigue igual ☹️
If you’re having this issue in 2024+, just shake your controller. I really don’t know why but it works. If that doesn’t work, I suggest getting some electronic cleaner BEFORE you buy all this extra stuff
No that never worked for me
I NEED HELP PEOPLE can i take out my xbox one hard drive and put it in my xbox one x PLEASE SOMEONE TELL ME THANK YOU
Yes
My d pad just shots to the right
My down dpad is actually fucked up.
If you are interested in fixing this contact me on eBay. I'll give you a good deal.
www.ebay.com/usr/tai1965
Yep mine has this issue it put me off Xbox one all together. PS4 dpad is nicer
Replaced the dpad sticker like 3 times in month. Its like this piece of shit was designed to unshape the metal plates over the minimum stress. A little bit of hadoukens at street fighter and zombies grabs from resident evil and this shit becomes unresponsive all over again. Im not that ogre type of player, this shouldnt be happening at the rate it is. So f* disapointed.
Microsoft scam us with sticker pad