Thanks for the video man followed it and it works but is it me or is the cap just not a bright blue its more of a dim blue and doesn't really stand out!
Not to bright and not really dim. Not sure how much current it is pulling but it's not to much. The only issue with the flow tail and is that the current draw affects most UI s in flashlights and effects the memory unless modified.
Does lighted switch work with 5A 12 groups? I'm trying to build an osram NM1 TIR optics in S15 host. I wanted the lighted switch to top it all off. 🙂🙂🙂
Not sure how well it will handle 5 amps. Also it may effect the memory on the convoy 12 groups (I never tested with thus driver). I would recommend contacting the convoy store threw aliexpress and ask Simon
Well you might run into problems. The normal led switch will run into memory mode issues. The led basically draws to much current. The driver will think you light is on wnen if it is not. So she. You turn on your flashlight it always goes to the next mode. So then you would have to put a resisor in the tail cap or driver to let the flashlight to operate as far as memory and modes.
Convoy DIY 1288 Switch with LED Blue Light For Convoy C8 M1 M2 S2 S2+ Flashlight [Events]: $2.11 [Final Price]: $2.11 [Link]: m.banggood.com/custlink/KG33cdyclO Also depends on your driver. In most cases it will effect memory function in the light. I am selling a low glow that was modified so the flashlight will be the same and memory will not be effected. eBay seller richyboy123456
Pointed twizzers will gonna help you do that easily :) 2:23
Thanks for the advice. I manage to find some good snap ring pliers that work.
@@flashlightreviews876 good to know. Looking forward on your new videos.
Thanks for the video man followed it and it works but is it me or is the cap just not a bright blue its more of a dim blue and doesn't really stand out!
Not to bright and not really dim. Not sure how much current it is pulling but it's not to much. The only issue with the flow tail and is that the current draw affects most UI s in flashlights and effects the memory unless modified.
@@flashlightreviews876 ah ok thanks for letting me know
Does lighted switch work with 5A 12 groups? I'm trying to build an osram NM1 TIR optics in S15 host. I wanted the lighted switch to top it all off. 🙂🙂🙂
Not sure how well it will handle 5 amps. Also it may effect the memory on the convoy 12 groups (I never tested with thus driver). I would recommend contacting the convoy store threw aliexpress and ask Simon
Batch from 2023 Has no issues with 12 group Convoy controlling. Amperrage ... I use too short to have hard knowledge
Can you turn off the tail switch led in the ui? Or is it on as long as the battery is in? About to do this to my s2+ but was curious.
Well you might run into problems. The normal led switch will run into memory mode issues. The led basically draws to much current. The driver will think you light is on wnen if it is not. So she. You turn on your flashlight it always goes to the next mode. So then you would have to put a resisor in the tail cap or driver to let the flashlight to operate as far as memory and modes.
@@flashlightreviews876 appreciate it. Not worth it good to know.
now where can i get one
Convoy DIY 1288 Switch with LED Blue Light For Convoy C8 M1 M2 S2 S2+ Flashlight
[Events]: $2.11
[Final Price]: $2.11
[Link]: m.banggood.com/custlink/KG33cdyclO
Also depends on your driver. In most cases it will effect memory function in the light. I am selling a low glow that was modified so the flashlight will be the same and memory will not be effected. eBay seller richyboy123456
Is it the same with m21b sir?
I have not tried that model yet. As of right now I have not seen a convoy threading on differently.
@@flashlightreviews876 thanks sir
@@elsigotchest0422 good pair of snap ring pliers normally help.