Once again I thank you for sharing your knowledge with the people of this planet called earth. Your video was very easy to follow. Even for us seniors that are not up with all the new technology. What a blessing. Be well, stay safe, in your travels. Sam Q. 🌎
For everyone asking how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
The easiest way to get into this mode is pretend you’re trying to activate E. Hondas hands or Blankas electricity. Thats the speed that got me into the modes 😀
I can't seem to get this to work. My S2+ will not go into programming mode. I've fully pressed and half pressed as fast as I can and it will not vibrate or go to a flashing output.
I actually don't use these flashlights anymore, so I can't really be of much help. I did have an M2B that had trouble if I cycled too fast. All I can suggest is trying it not quite so fast? Sorry, I hope you can get it figured out somehow.
Good Day Sir. Mine got stuck on 10 or 20% brightness after I double tapped afte the first buzz. The quick taps to change the groups doesn't work anymore. Is there a way to do a reset or do I need to buy a new driver? Thanks in advance.
You most likely have to buy a new driver,sounds like the memory function of the mode changer burned out.They warn about using it repeatedly or leaving it in the open change mode to long cause it will burn it out.
@badger0888. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
@lasempre-gs4fg. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
I am sorry. But this is the worst flashlight interface out there. Its just stupid. And makes no sense. I am sticking to Sofirn and Wurkkos. I was excited to give Convoy a try. But I just received my first Convoy. And I absolutely hate it.
Sometimes you have first grow your balls to use flashlights as they are made for. Sofirn and wurkkos are the same factory, like Audi, seat, VW - the same parts, the same factory, the same concern. I'm using sofirn lights many years, sc31pro(anduril 1), Q8 pro (anduril 2), fireflylite e07 (anduril 2) and some others, but they are more to play around with the configuration, with the blinkies, useless Storm mode and more non-sens stuff. Anduril can't go turbo mode from a first tap/on, while all convoy can go from switch on to 100% if you set the right group you want to use the whole time. If we're talking about using a flashlight for general purpose there is no time and place for anduril. Convoy makes excellente quality flashlights with maximum performance driver for any LED, on the Website or aliex you can choose whatever driver, LED, tint or body color you want get, this is what makes difference between convoy and sofirn, sofirn can do only a choice between the TINT thats all. This is why convoy is the leader in "cheap" and powerful lights, made for grown users they know what they want. 👍 I hope u understand this. Peace 🔦🔦🔦🔦
This guy makes setting easier than reading the instructions. Thank you!
Once again I thank you for sharing your knowledge with the people of this planet called earth. Your video was very easy to follow. Even for us seniors that are not up with all the new technology. What a blessing. Be well, stay safe, in your travels. Sam Q. 🌎
This is a lot easier to understand than reading the text instructions.
Thank you!
By far the most easy to follow video for configuration. Thank you!
This is THE best description I have found and followed this to re programme my convoy , nice one 👍
Best explanation I have seen on the mode selection, so clear, thank you.
Thanks! Straight to the point and clear.
For everyone asking how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
Thank you! The text instructions I found weren't very clear, but thanks to this video, I was able to set up my M21B exactly how I wanted it.
thank you so much! This is the only video on youtube that is helpful. I couldn't understand the instructions either
great video,
Now I finally know how to set the modes👍😊
Very helpful, thank you! 1 definitely seems easy to miss. I pressed immediately on accident and got the second group, which I wanted anyways.
sent here from reddit but your directions were spot on for my convoy s2+! thank you!
Really appreciate you making this informative video. Clear and straight to the point! Now i finally understand that diagram haha
The easiest way to get into this mode is pretend you’re trying to activate E. Hondas hands or Blankas electricity. Thats the speed that got me into the modes 😀
thank you! set my Convoy S21b to tactical mode 11/memory off so it always turns on to 100%/turbo then can get to strobe in 2 clicks. 👍🏽
Thank you for your knowledge sharing. 👏
Thanks a lot!
This really helped me with my S21A
Thank you this was very helpful!
Thanks, it worked!
I just wish I could get mode two but still have battery check without all the other flashing modes.
Great info! Great video!
Thanks for the video
Thankyou. The written instructions are not very helpful. Your video is so clear and easy to understand.
Thank you
Thank You!!!
Thanks!
Thanks bro !!!!
cheers fella
I can't seem to get this to work. My S2+ will not go into programming mode. I've fully pressed and half pressed as fast as I can and it will not vibrate or go to a flashing output.
I actually don't use these flashlights anymore, so I can't really be of much help. I did have an M2B that had trouble if I cycled too fast. All I can suggest is trying it not quite so fast? Sorry, I hope you can get it figured out somehow.
Good Day Sir. Mine got stuck on 10 or 20% brightness after I double tapped afte the first buzz. The quick taps to change the groups doesn't work anymore. Is there a way to do a reset or do I need to buy a new driver? Thanks in advance.
I'm sorry I can't help with that, I'm really not sure. You may find some answers on The Budget Light Forum? Good luck
You most likely have to buy a new driver,sounds like the memory function of the mode changer burned out.They warn about using it repeatedly or leaving it in the open change mode to long cause it will burn it out.
How do I know if I have this Firmware version? My S2+ is around 2019?
Sorry I can't help you. I'm not sure how to tell. Maybe message and ask Simon at Convoys Ali Express store? Good luck
@badger0888. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
How for s21e bro??
I'm sorry, I'm really not sure about that light.
@lasempre-gs4fg. Hi,how to tell which driver and software is which this is how... When you turn on the flashlight and wait 2 to three seconds and it blinks that is the 3,5 mode driver,this is the Biscotti driver in this video it doesn't blink at all after turn on.
I am sorry. But this is the worst flashlight interface out there. Its just stupid. And makes no sense. I am sticking to Sofirn and Wurkkos. I was excited to give Convoy a try. But I just received my first Convoy. And I absolutely hate it.
Sometimes you have first grow your balls to use flashlights as they are made for. Sofirn and wurkkos are the same factory, like Audi, seat, VW - the same parts, the same factory, the same concern. I'm using sofirn lights many years, sc31pro(anduril 1), Q8 pro (anduril 2), fireflylite e07 (anduril 2) and some others, but they are more to play around with the configuration, with the blinkies, useless Storm mode and more non-sens stuff. Anduril can't go turbo mode from a first tap/on, while all convoy can go from switch on to 100% if you set the right group you want to use the whole time. If we're talking about using a flashlight for general purpose there is no time and place for anduril. Convoy makes excellente quality flashlights with maximum performance driver for any LED, on the Website or aliex you can choose whatever driver, LED, tint or body color you want get, this is what makes difference between convoy and sofirn, sofirn can do only a choice between the TINT thats all. This is why convoy is the leader in "cheap" and powerful lights, made for grown users they know what they want. 👍 I hope u understand this. Peace 🔦🔦🔦🔦
@@TonyMontana-xj3zv Would it hurt you to change the tampon once in a while?
Lmao