Good job! The only thing I would have done differently is (a) kept the USB port for charging, instead of the DC jack (everyone has USB cables), and (b) used the spot welder to connect the batteries instead of soldering. Other than that, pretty nice, and it shows that Lithium Ion (Li-Ion) is much better than Lead Acid (Pb) - the Li-Ion battery isn't much bigger than the Pb battery, but has much more power.
😉 *Muchas gracias amigo* _este pequeño ventilador portátil a batería está perfecto y con su propia iluminación aún más completo, solo faltaría tener un puerto para recargar celular y un pequeño panel para que se esté recargando las baterías siempre o una conexión que con el mismo giro del motorcito se esté siempre cargando_ así como el alternador de los autos. Saludos 🖐️😎
Exactly i was thinking probably the main purpose of this video is to show how to replace battery to for a longer usage of the fan not to upgrade the strength of the spin
This is not best practice, there is no way to connect lithium-ion batteries in parallel, this will cause unbalanced charging of cells, the cells could end up charging each other with no control. The main point here is safe and balanced charging of individual cells! Good idea but be careful! 😁
All of the cells seemed to be the same type and they were all connected in parallel to each other. Yes, one cell could take down the entire pack by wearing out faster, but with multiple cells in parallel, that shouldn't happen as quickly, and as others have said, by the time this happens, other parts will have stopped working instead, thereby the fan will be of little use anyway.
При желании и наличии лишних аккумуляторов - можно ещё один ряд аккумуляторов запихнуть, места достаточно.) If desired and there are extra batteries, you can shove another row of batteries, there is enough space.)
Hi!.. I am not an electronic technician but I know how to follow this video, I just want to ask for the materials you used for this project please reply..thank you and more blessings.
creo que ultimamante los videos de este canal ya no son tan interesantes como antes que era un gusto verlos ese proyecto es basico yo mire es por proyectos como el jeep, como los drones de tubos o cosas asi esperemos mejoras en el contenido pero en general muy buen canal
Sir yong sakin gumawa ako ganyan kaso nagkamali po ata ako ng pagkabit ng wire ng Fan sa Charger cord , So ayon Yong power bank po na pinagsasaksakan ko biglang namatay at ayaw na po gumana habang sinusubukan ko kung saan ang tamang kabitan ng wire na Fan sa Mga wire po ng charger cord 😢 maayos papo kaya yong power bank ko?Rapoo 20000mah po.
Un trabajo maestro Ud me puede ayudar nadie me respóndeme ventilador recargable cuando se engancha en la corriente anda y cuando se quita se apaga y yo necesito q ande con la batería ya q en cuba no hay casi corriente me puedes ayudar
Good job! The only thing I would have done differently is (a) kept the USB port for charging, instead of the DC jack (everyone has USB cables), and (b) used the spot welder to connect the batteries instead of soldering. Other than that, pretty nice, and it shows that Lithium Ion (Li-Ion) is much better than Lead Acid (Pb) - the Li-Ion battery isn't much bigger than the Pb battery, but has much more power.
Very amazing . You many tools I like it
😉 *Muchas gracias amigo* _este pequeño ventilador portátil a batería está perfecto y con su propia iluminación aún más completo, solo faltaría tener un puerto para recargar celular y un pequeño panel para que se esté recargando las baterías siempre o una conexión que con el mismo giro del motorcito se esté siempre cargando_ así como el alternador de los autos.
Saludos 🖐️😎
Nice video. Too bad the fan didn't go extreme. You know like a jet engine or something. LOL
Should be possible with 2S battery arrangement
Exactly i was thinking probably the main purpose of this video is to show how to replace battery to for a longer usage of the fan not to upgrade the strength of the spin
Nice job brother 👍😎
Que buen trabajo Ud hizo es un maestro 👍👍👍👍👍👍👍👍👍👍❤️❤️❤️👍👍👍👍👍👍👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️
This is not best practice, there is no way to connect lithium-ion batteries in parallel, this will cause unbalanced charging of cells, the cells could end up charging each other with no control. The main point here is safe and balanced charging of individual cells! Good idea but be careful! 😁
WIth this small of a pack unbalanced cells would take a very long time to happen and the fan would be so old that its not worth fixing.
All of the cells seemed to be the same type and they were all connected in parallel to each other. Yes, one cell could take down the entire pack by wearing out faster, but with multiple cells in parallel, that shouldn't happen as quickly, and as others have said, by the time this happens, other parts will have stopped working instead, thereby the fan will be of little use anyway.
thank u so much sir this my dream video
При желании и наличии лишних аккумуляторов - можно ещё один ряд аккумуляторов запихнуть, места достаточно.)
If desired and there are extra batteries, you can shove another row of batteries, there is enough space.)
*_И вывести USB порт для зарядки мобилы._*
Where will I got circuit plate of it
So good
6 milone congratulations🎉🥳👏
This is very helpful video
bhai circuit board pawa jabe
Lithium Battery Pr jo circuit plate use kiye wi kaha mil sakti hai... Ya kis device me mil sakti hai plz reply
Hi!.. I am not an electronic technician but I know how to follow this video, I just want to ask for the materials you used for this project please reply..thank you and more blessings.
Where are you from? 😀
This is the 1st time I find myself disappointed a bit, watching this from you....😌
Why????
Hi ! Good morning! where are you from?
serian 12 amperios y no 19 amperios buen trabajo, un saludo
Very nice good luck
What BMS did you use?
1s 20AMP BMS is used.
can you pls tell what board you put?
Where I find screw driver and tapes???
Very interesting. You are very good
where do i find that screwdriver?
Hello sir ye BMS konasa he
4:11 what name the item?
BMS cercit
Why so much capasity?
Why not? 19,000mAh is better than 4,000mAh.
creo que ultimamante los videos de este canal ya no son tan interesantes como antes que era un gusto verlos ese proyecto es basico yo mire es por proyectos como el jeep, como los drones de tubos o cosas asi esperemos mejoras en el contenido pero en general muy buen canal
Where will i get circuit plate off this fan
Good job mister well done
then don't be surprised when the fan lights up
I been waiting for this content
whats the name of this bms circuit?
What type of battery?
Mantap 😁👍👍
👍❤️❤️❤️❤️❤️👍
whats fan brand?
What is the chipset that you add to connect the battery?
Amazing
Review obeng cordless nya pak🙏🙏
Salam kenal dari Indonesia
Hii I'm form IND
What the name type charging module?
I have the same fan. I want to use it without battery, only dc current how do I modify it?
Where we can get these things
Beast video ha vi
Milwaukee m18 fan with 13 amp hour 18v battery if your anxious
Sir yong sakin gumawa ako ganyan kaso nagkamali po ata ako ng pagkabit ng wire ng Fan sa Charger cord , So ayon Yong power bank po na pinagsasaksakan ko biglang namatay at ayaw na po gumana habang sinusubukan ko kung saan ang tamang kabitan ng wire na Fan sa Mga wire po ng charger cord 😢 maayos papo kaya yong power bank ko?Rapoo 20000mah po.
awesome
استمر🇮🇶😘
Could have just added a TP4056 or the 2A version of it and that would have given it USB charging so you don't need a special 4.2V DC adapater.
A 1A power adapater....
bruh thats nearly a whole day to charge. A 4A power adapter would have been a bit better.
Good man♥️
Youar great
❣️❣️
How to increase fan speed?
نايس
Bro fan bout to be running for 1900 hours straight
Hii sir
link BMS?
BMS Details Please?
👍
hi vi
Hello
please make a mini genarator
Un trabajo maestro Ud me puede ayudar nadie me respóndeme ventilador recargable cuando se engancha en la corriente anda y cuando se quita se apaga y yo necesito q ande con la batería ya q en cuba no hay casi corriente me puedes ayudar
Tetap semangat
Reis seviliyorsun ❤
please craft a big car
আমার লাগবে এই ফ্যানটি এখন
First comment 🥰
First like first comment
Isn't that dmart fan 😮
🇬🇹🇬🇹🇬🇹
15th comment
❤️👍❤️❤️❤️❤️❤️❤️👍👍SN
Only one downside. Impossible to see BMS charging statis indicators.
WATCH CLOSELY ON THE CHARGER MODULE THE MALE ONE OK
6:13 BRO