Norcold N811 No Cool Reset
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- This customer had not used his RV for a while and when he turned the Norcold N811 refrigerator on it had a “No Cool” error code. He tried to reset it, but was unsuccessful so he called me. I show you how to do this reset procedure.
Merchandise hillbilly-rv.c...
Hillbilly RV | Facebook
paypal.me/allseasonsmobilerv
The other channel / @hillbillyrvbehindthec...
patreon.com/hillbillyrv
If you want to mail us something Hillbilly RV, PO Box 86, Harper, WV 25851
Email hillbillyrvwv@gmail.com
Hillbilly RV Amazon Store www.amazon.com...
Disclaimer:
Due to factors beyond the control of All Seasons Mobile RV Service LLC and Hillbilly RV, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. All Seasons Mobile RV Service LLC and Hillbilly RV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All Seasons Mobile RV Service LLC and Hillbilly RV recommends safe practices when working with power tools, ladders, climbing, repairing LP gas lines or appliances, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of All Seasons Mobile RV Service LLC and Hillbilly RV, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
Your channel is the best I’ve seen for RV repairs. Thanks for bringing us along. I never miss watching your videos.
Thanks
OK Hollywood, now get back to work. Lol. I cut a igniter connector off my rv furnace wire which was to long with a new Dinosaur board. I crimped on a spade lug and it’s been running for 6 months no problems.
I can't hear but heard the click the 1st time. Good job!
Good morning
I have that fridges big brother, the N1095 and converted it to a 12VDC compressor cooling unit (JC refrigeration) last spring. It works beautifully now and no more Nocold nonsense as the new unit has its own electronics.
I like Hillbilly Heaven!
I didn’t know that was a thing. Hmmmm
Would love to get mine updated
Carry some " T " pins in your hat brim. Then stick the t pin in the connector and hook a jumper wire that you will now carry 2 of in your front pocket to your ground. Also. Get autumated man. Small drill , 1/4 extension and some 1/4 inch sockets, preferably magnetic.
Haven it shall be the Boss has spoken 🎉😂
I use a pick and hook set tool to pull off terminals. Much easier than using pliers because when you use pliers, you're pressing the terminal which makes it harder to pull off. Just use the hook to get under the terminal and pull. I learned this from the other rv tech Darren ... you know the one in Washington state.
I do commercial heating and cooling. I find some companies limit info like that for liability reasons, others do it for "proprietary " reasons so other manufacturers cant copy their designs.
Cool. It's always nice to help people out and meet people who've seen your videos. Too bad the spade connector ripped off. Perhaps a squirt of WD-40 would have been useful before tugging?
Got a good one for tomorrow, installing a 20 foot patio awning my customer had totally ripped off going down I 75 from Kentucky.
Nice
Love the video Kenny thanks. Name for little guy " Lud Duke " .
If it were mine, I would install a small switch with a wire to 19 and another to ground so that it could be reset without taking everything apart. If it is an empty socket, you should be able to get the connector part for that plug..
Thanks Kenny great job as always !!! Doing mobile repairs you never know what to expect . Appreciate you sharing the “Real” life experiences 👍👍🇨🇦✌️🇨🇦✌️👍✌️🔧🔧
Another good video
Hillbilly Haven is a fine name - yes, keep it.
And remember: If you haven't broken it yet, you're not trying hard enough.
Ha ha
I enjoyed the video Kenny! Thank you!
Great video Kenny!
Great job and good info as usual! Thanks Kenny!
Great information Kenny thanks
That was awesome. Don
The birds were clicking
All manuals have to be downloaded today. That sucks
Yep. Like the old paper ones
Hillbilly Haven in Hershey, we will try to get there will you be there all week?
We will definitely be there all day Friday and probably a lot of Saturday.
👍👍
the light might come back on when you try to run it on gas. no light = no cooling.
Maybe Norcold doesn’t anyone trying to do the reset because people pull the igniter spade out of the board? What? It’s possible! 😈
That was different
Could u not just disconnect all power to do hard reset?
Nope
I get 6 flashes ?
Help this thing is giving me some bs