This has been helpful. I just took all this apart last week. Its such a pain and i know i have try and go all back through this again. Great vid and explanation.
I have the same year and color 2500 megacab limited I have no issues but thank you for the heads up, but May I suggest that you put some dielectric grease on connector prior to reconnecting
I pretty sure mines the same when it's wet it comes on and off but dry weather it's always on Dampener was bad made truck shake and hit the brake a Little locked up and took me to the ditch
I have a similar problem. I can sometimes make the abs light come on and off by running over the pavement reflectors on the highway. Seems like it is affected mostly by running over a bump with the right side of the truck (2017 ram 2500 4wd). It is finicky.. sometimes light wont come on for a while and sometimes wont go off ..
@@GarageVlogBob I’m pretty sure it’s the abs module malfunctioning. I’ve heard that there are problems around that model year. Hard to find a new one since they are on back order.
I have replaced my module 3 times total. Original/ first/ second. It was never the module. Mine was harness issues only. I struggled so much will the harness checking out OK that I was convinced it was the module. It was not
@@GarageVlogBob were you able to fix it? I’ve taken apart the harness from the module and looked all around for some kind of problem but, nothing visible.
I have abs traction and brake light on my 2014 bighorn I was thinking speed sensor? But maybe i should try pushing in the module and see if it goes away for a sec?
You should either find someone who has the abilities to read the code or pay the $50 to own the app and read the code yourself. There is no point in guessing what is wrong
I had this same light, ended up being a wire pulled out, possibly during a previous turbo repair, where the passenger front wheel sensor plugs into the main wiring harness at the PS front shock mount. pushed the wire back in, problem solved.
With that issue I found if I needed to use 4x4 I would make the switch before I would turn the key on. Once turning the key on it would switch to the selected 4x4 position and stay I would have to do the same thing to put it back in 4x2
I knew I had issues with the Passanger side so I hooked my meter to one end of those wires went to the plug and found the ones needed. Tightened the connectors problem fixed on that issue
I connected a wire to the vehicle side wheel speed sensor then tested connections with a multimeter. When I discovered where was no broken wire to the sensor I was having issues with a began to look at connection issues. That's when I found the bad connection truck side at the main hcu module. Hope that helps
It seems pretty obvious. Over top of the coil spring on the drivers side. He already had the inner liner taken out, he mentioned it in the video that he had to reinstall it.
I have searched for so long for this. So much useless information that Google pulled up THIS is a God send. THANK YOU!
You're welcome!
This has been helpful. I just took all this apart last week. Its such a pain and i know i have try and go all back through this again. Great vid and explanation.
Thanks glad it helped
Thanks for all of your hard work! I'm sure I speak for others when I say this.
I notice all the comments. Thanks
Having the same issues too, hopefully this will fix our issue. Thanks for the good info!!!
Hope it helps
I have the same year and color
2500 megacab limited
I have no issues but thank you for the heads up, but May I suggest that you put some dielectric grease on connector prior to reconnecting
It already had some from a previous repair attempt
Awesome. I’m going to try this tomorrow. Mechanic wants $1800 to replace abs pump.
Good luck!
Dont pay them a dime. Let me know if this worked for you, i'll be doing mine next weekend or the end of the month
I am on the second ABS module. First one was covered under warrantee but this one is not. 2018 Power Wagon with less than 20k miles.
Sounds about right. If they didn't change the hcu that might be your main issue
09 charger rt pulling 5860 and h5862 codes any idea?
No sorry
I pretty sure mines the same when it's wet it comes on and off but dry weather it's always on
Dampener was bad made truck shake and hit the brake a Little locked up and took me to the ditch
Hope my videos help
I have a similar problem. I can sometimes make the abs light come on and off by running over the pavement reflectors on the highway. Seems like it is affected mostly by running over a bump with the right side of the truck (2017 ram 2500 4wd). It is finicky.. sometimes light wont come on for a while and sometimes wont go off ..
Hope my video can help
@@GarageVlogBob I’m pretty sure it’s the abs module malfunctioning. I’ve heard that there are problems around that model year. Hard to find a new one since they are on back order.
I have replaced my module 3 times total. Original/ first/ second. It was never the module. Mine was harness issues only. I struggled so much will the harness checking out OK that I was convinced it was the module. It was not
@@GarageVlogBob were you able to fix it? I’ve taken apart the harness from the module and looked all around for some kind of problem but, nothing visible.
My issue was inside the plug to the module. There was a loose connector. Once I found that and tightened it up my issues where gone
I have abs traction and brake light on my 2014 bighorn
I was thinking speed sensor?
But maybe i should try pushing in the module and see if it goes away for a sec?
You should either find someone who has the abilities to read the code or pay the $50 to own the app and read the code yourself. There is no point in guessing what is wrong
I had this same light, ended up being a wire pulled out, possibly during a previous turbo repair, where the passenger front wheel sensor plugs into the main wiring harness at the PS front shock mount. pushed the wire back in, problem solved.
Never know what your going to find
Great fixed . Thank you
Glad it could help
Would your truck go into 4wheel drive while the light was on ?
With that issue I found if I needed to use 4x4 I would make the switch before I would turn the key on. Once turning the key on it would switch to the selected 4x4 position and stay I would have to do the same thing to put it back in 4x2
2018 Ram 3500 G56 here. ABS light. Thx!
Hope it helps
This could be my problem to
Hope it helps
How did you determine which wire was the lose one?
I knew I had issues with the Passanger side so I hooked my meter to one end of those wires went to the plug and found the ones needed. Tightened the connectors problem fixed on that issue
Any updates?
What would you like an update on? I would be happy to help
How did you know what pin (wire) it was. Pin 4 related to right front speed sensor? Thank you for the video.
I connected a wire to the vehicle side wheel speed sensor then tested connections with a multimeter. When I discovered where was no broken wire to the sensor I was having issues with a began to look at connection issues. That's when I found the bad connection truck side at the main hcu module. Hope that helps
Mine just started acting up, no codes yet.
Look until alfaobd get the app and the needed blue tooth adaptor that program will come in handy and you will find some nice features
I would suspect less ABS control modules would be replaced if dealers took the time you did to diagnose the real problem.
I have a OBDLink MX bluetooth reader and used their app. I have AlfaOBD, would it be better to use that app to scan for codes?
How did you know it was the 4th wire?
Color of wire
Good video!!!!
Glad you enjoyed it
Which pin is for the other side?
Sorry, but I'm unsure at this time. I made that video a few years back now.
How did you know it was the 4th wire
Wire color
Thank you sir!!!!
Glad I could help
I have the same issue with my 2018 the light comes on and off and dings all the time
Are you sure it's the same code? Sounds more like a 0020 issue with abs pump
@GarageVlogBob I'm not sure the code off hand but hitting bumps seam to make it do it so I believe it's a loose wire
Don't assume anything get the code and know what your trying to fix before you start tossing ideas and money at your truck
did it ever come back on after this?
No
Did it stay fixed?
Yes zero issues for a few years now
2022 3500 same problem 😢
That sucks. You would think they would figure out a solution by now
@ i go to the dealer like 3 time shit the same problem and still
Wouldn't it be a good idea to show us where this unit is located
Next time I will try to do better
It seems pretty obvious. Over top of the coil spring on the drivers side. He already had the inner liner taken out, he mentioned it in the video that he had to reinstall it.