and if it does not give signals to output1 and output2, what can be done? in the settings everything is spelled out correctly, but there is no signal to the output of the spindle relay. from the m3 and m4 commands. thanks
Hello, what are the conditions that must be available in the computer in order for the Mach3 usb to work with me without problems, and thank you very much
Hi, I have the same setup as you have. I can turn the spindle on and off. I can control the speed but I don't have any RPM indication. I have bought some proximity hall effect switches and will try to make it work.(waiting for the parts)I think it is important to know the actual speed of the spindle. If I don't come up with anything to make the RPM indicate, As an alternative, I also bought a laser probe so I can shoot the spindle when it is spinning so I can determine the speed. (Waiting for the part).
hi , I have set up the ports and pins , have enabled the output , set the spindle , set the spindle pulleys , the spindle speed is not working ? Can you help ?
On this site you will find the procedure to operate your spindle with Mach3. royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/ you need to use: 1 - Mach3 en version supérieure ou égale à 3.0 2 - install Redistribuables VC++ 2008 (A télécharger et à installer ) www.microsoft.com/fr-fr/download/details.aspx?id=5582 3 - un adaptateur RS485 you can find here (www.ebay.fr/itm/1-2-5-10-CH340-USB-to-RS485-485-Adapter-Converter-Module-For-Win7-Linux-XP-Vista/263257482665?hash=item3d4b5e65a9:m:m0F698t1uaXxN2Acnz7Tvfw) 4- Download this plugin for Mach3 vfdPlugin-1.7.1 (royaumedeole.fr/wp-content/uploads/2013/11/vfdPlugin-1.7.1.zip) 5- Plugin installation The installation of the plugin is relatively simple. Just copy the dll file into the 'plugIns' directory of your Mach3 installation. For example, for an installation in c: \ Mach3, we will copy the file in the folder c: \ Mach3 \ plugIns 6 - Configuring the VFD: Paramètre Valeur Description PD001 02 active les commandes via le port rs485 PD002 02 active le contrôle de la vitesse via le port rs485 PD004 Selon moteur (50hz/60hz) Fréquence nominale du moteur (voir plaque) PD023 01 active le mode reverse (rotation anti horaire). seulement si vous désirez utiliser ce mode dans MAch3 PD144 Selon moteur vitesse nominale de votre moteur (voir plaque) PD163 1 Adresse donnée au vfd (ici 1) PD164 1 Vitesse de ligne (ici 1 pour 9600 bauds) PD165 3 Mode de transfert (ici 8N1 RTU) After you will find on this site the continuation of the detailed procedure. royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/ Sorry for my English. I hope this will help you.
recently My Machine spindle work fine without the plugin. and..all the motors work fine.. when i click button on mach3(to start the spindle) the spindle didn't start
You skip through the text pages much too quickly. No time to read all the text or observe the screenshots. Sorry, my personal opinion: - no good to me!
and if it does not give signals to output1 and output2, what can be done? in the settings everything is spelled out correctly, but there is no signal to the output of the spindle relay. from the m3 and m4 commands. thanks
You get a thumbs up for blowing my laptop speakers..
Once i start the spindle by using M03.then i put M05 the spindle can't stopped what is the reason sir
What is your Spindle tuning profile: steps velocity acceleration
how did you connect the spindle to mach3 usb
YOU SHOULD REVIEW THE REAL CABLE CONEXTION .... In my case output #1 was pin number 5...
Hello, what are the conditions that must be available in the computer in order for the Mach3 usb to work with me without problems, and thank you very much
Excellent, thanks, will be trying this.
how can you control spindle direction? What hardware I need for that?
Hello - What hardware are you using?
Hi, I have the same setup as you have. I can turn the spindle on and off. I can control the speed but I don't have any RPM indication. I have bought some proximity hall effect switches and will try to make it work.(waiting for the parts)I think it is important to know the actual speed of the spindle. If I don't come up with anything to make the RPM indicate, As an alternative, I also bought a laser probe so I can shoot the spindle when it is spinning so I can determine the speed. (Waiting for the part).
hi , I have set up the ports and pins , have enabled the output , set the spindle , set the spindle pulleys , the spindle speed is not working ? Can you help ?
My spindle wont star..whats the problem...all the motors work fine..but just the spindle wont start
On this site you will find the procedure to operate your spindle with Mach3.
royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/
you need to use:
1 - Mach3 en version supérieure ou égale à 3.0
2 - install Redistribuables VC++ 2008 (A télécharger et à installer )
www.microsoft.com/fr-fr/download/details.aspx?id=5582
3 - un adaptateur RS485 you can find here (www.ebay.fr/itm/1-2-5-10-CH340-USB-to-RS485-485-Adapter-Converter-Module-For-Win7-Linux-XP-Vista/263257482665?hash=item3d4b5e65a9:m:m0F698t1uaXxN2Acnz7Tvfw)
4- Download this plugin for Mach3 vfdPlugin-1.7.1 (royaumedeole.fr/wp-content/uploads/2013/11/vfdPlugin-1.7.1.zip)
5- Plugin installation
The installation of the plugin is relatively simple. Just copy the dll file into the 'plugIns' directory of your Mach3 installation. For example, for an installation in c: \ Mach3, we will copy the file in the folder c: \ Mach3 \ plugIns
6 - Configuring the VFD:
Paramètre Valeur Description
PD001 02 active les commandes via le port rs485
PD002 02 active le contrôle de la vitesse via le port rs485
PD004 Selon moteur (50hz/60hz) Fréquence nominale du moteur (voir plaque)
PD023 01 active le mode reverse (rotation anti horaire). seulement si vous désirez utiliser ce mode dans MAch3
PD144 Selon moteur vitesse nominale de votre moteur (voir plaque)
PD163 1 Adresse donnée au vfd (ici 1)
PD164 1 Vitesse de ligne (ici 1 pour 9600 bauds)
PD165 3 Mode de transfert (ici 8N1 RTU)
After you will find on this site the continuation of the detailed procedure.
royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/
Sorry for my English. I hope this will help you.
Why have to use plugin..?
Without this module (plugin) you can not get a connection between your computer (mach3) and the VFD
recently My Machine spindle work fine without the plugin.
and..all the motors work fine..
when i click button on mach3(to start the spindle) the spindle didn't start
Or I Make some Mistake in Pins And ports..
in enable#1 i make pins to value 14,16,17 but nothing work fine
Kontrol kartı olarak ne kullandın
whenever i try to enable the same pin on the output as i do in the motor menu. i get an error telling me that pin has been specified 2 times.
Thank you
How did you wire it all up?
You will find the procedure to follow on this site:
royaumedeole.fr/informatique/plugin-mach3-pour-vfdhuanyang/
You skip through the text pages much too quickly. No time to read all the text or observe the screenshots. Sorry, my personal opinion: - no good to me!
pause button?
@@ericberg4397 how dare you :)
Fairly useless video unless you want to listen to a spindle run