ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2024
- How to wire a VFD and AC Motor:
👉 • Connecting a 2.2kW AC ...
In this video I'm setting up a AC motor which will be used for a CNC lathe. I will do some wiring with MACH3 and setup those devices. Also I did a test run of the motor with the PC MACH3 CNC control. I hope you will enjoy. I'm going to make a working CNC lathe with components I'm using in this and other videos so if you're interested I suggest to subscribe this channel!
Have a nice day.
Subscribe and hit the like button if you like the video and want more!
If you have any questions - comment down below.
Thanks for watching!
00:00 Intro
00:21 Short presentation of used devices
00:33 Wiring of the circuit
03:33 MACH3 setup
04:53 VFD setup
05:53 Test run
07:15 Outro
Facebook Page 👉 / gbwmcnc
TH-cam Channel 👉👉 / gbwmweldingmachiningcnc - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Pacific Stage 2 - Week 3 Day 3 // DFM vs PRX | DRX vs TLN](http://i.ytimg.com/vi/il3Twexat3A/mqdefault.jpg)
Thanks, gave me exactly the information I was looking for 👍
Great to hear!
Thank you so much for this video!
you're welcome!
Great 👍
Very good
Great job sir thanks a lot, your video solved ❤my pwm based😢 frequency spindle operating issues...god bless you ❤❤❤❤❤❤❤
I'm glad my video helped you 😊
Obrigado ajudou muito , FELICIDADES
Tnx ur a champ!
I'm glad I could help. I hope you enjoy! 😁
good job
Thank you! 😁
Pro!
Thank you.
You're welcome
Grazie
💪
i would love to see same proces on linux cnc. Its much harder and a lot of peoples using same cnc bob as you with linux.
I made some time ago a video about linuxcnc configuration on my cnc lathe basis. It's a bit less quality than my recent videos but there's all you need to configure what you need. The VFD setup is exactly the same as for mach3. Link below.
th-cam.com/video/RIdnredH4Ys/w-d-xo.html
Good day sir can you teach me how to connect it to my szgh control. Thanks
Sorry, i have no experience with szgh controllers
Hello. Can you connect this vfd via rs485 to usb adapter?
No idea tbh
Good afternoon friend, I have a SAKO SKI780 single-phase 220V inverter for a 2 CV Spindle on the RNR on an Ecomotion Masch 3 board and I am not able to configure the parameterization on the inverter, can you help me solve this problem?
Hello! The configuration should be similar to what you see here. If you need more information about rnr ecomotion check out my video where I showed H100-2.2T4 vfd setup. There was somebody in the comment section who gave info about how to setup the vfd with RNR board.
I have the same mach3 board, can you get reverse out of it?
Do you mean reverse spindle rotation signal (M4 command)?
@@GBWM_CNC Yes, I believe you would need another relay...
@@cr2fabrication Exactly.
I have huanyang vfd which one that i must connect to my paralel breakout board?
Could you explain? I don't understand
@@GBWM_CNC i want to control speed of spindle using mach3. Can you explain what port of vfd (acm,dcm,for etc) which is i must connect to breakout board?
@@ar-roihanchannel7255 I have never had a hyanyang VFD so I can't tell you but you will need to find in the manual where to connect forward run command signal and use the relay outputs as on the video and find the analog inputs on the vfd and feed in those the analog signal from the parallel board. I think if you find a wiring diagram you should do well
Can it be used with cnc red board?
Why would you use both?
Can you leave a link to all items used in video please
VFD - Sako SKI780 (can be found on aliexpress)
Motor - 2.2kW 400V 50Hz (bought used from local ebay)
Breakout board (the one connected to pc) is the cheapest parallel CNC breakout board available on aliexpress
The power module and transformer are just to make 12VDC out of 230V AC (I had those lying around) - you can use any 12VDC power supply instead (the breakout board needs 12V input in order to work properly)
Thanks a bunch
Hello bro how's you ? I am using same breakout board as you are using .but when I click on spindle start the relay on board does not click (no sound of tik) .can you tell me what's wrong with it ?
check with a multimeter if there is the right voltage on the output of the relay coil input
Bro it does not show any voltage on multimeter. I have checked so many times
@@zamanraza9635 Well. Then there is something with the configuration or the board wiring or the board is damaged. Hard to tell remotely bro
I have made all correct setting according to your video . But when remove parallel port cable and reattach it to board then the relay click the tik sound. Don't know what's the problem
@@zamanraza9635 Have you connected both the USB and parallel cable (and all power supplies?) ? I had similar problems when I forget to connect the USB cable I think. If this is not the case - I dont know. It worked always fine for me
Uruguayan?
No sir
@@GBWM_CNC I saw the Mate in the beginning, my wife is from Uruguay...
@@cr2fabrication I am from Poland, but I love mate 😁
@@GBWM_CNC You fooled us both!!! God Bless!!! Great video.. Trying to decide either a servo with VFD or straight 3 phase motor like yours..
@@cr2fabrication haha! 😅😅 There are many factors to take under consideration. But I think the main reasons to take a servo for spindle drive is the ability to "clamp" the shaft by using a control signal, they're usually lighter than usual 3 phase motors in the same power range and there are many ways to control the motor. But if the price matters then the standard 3 phase motors might be the way to go.
Gówno widać
Ja nie widzę, proszę przetrzeć wyświetlacz :)
Hi sir donyou have an email address? Maybe you can help me with my problem. Tnx.