DEWAL 20V MAX Cordless Grease Gun REVIEW! DCGG571B
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Buy Here! homedepot.sjv.io/rn0nv
DEWALT 20-Volt Max Cordless Grease Gun (Tool-Only)
The Grease Gun features a powerful motor that delivers 10,000 max psi to power through clogged grease fittings. This grease gun is designed with a high-volume pump which pushes up to 5.0 oz./minute in high-flow applications. The grease gun is backed by a DEWALT 3-year limited warranty for added peace of mind.
Variable speed trigger offers precise control of the grease flow
42 in. extra-long and flexible hose designed for reaching hard to access grease fittings
Bright LED light assists in locating hard to see grease fittings in low-light situations
Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism
Integrated no-mar foot design allows operators to rest the tool on flat surfaces
Air-bleeder valve assists in pump priming after cartridge changes
Battery and charger sold separately
There are a lot of videos on TH-cam about this tool, but yours is the best and covered all of my questions. Thanks so much!
Thanks for your review
I saw your Ryobi grease gun review... looked like it was pumping grease stronger.. thanxs for the review.
I just got the exact same one my buddy said they work really good going to find out tomorrow
i just came back from the post office with my new grease gun... i'm 'janey' homeowner, live alone in the middle of nowhere and do all m own maintenance, but the problem i have is little hands. i just don't have the strength to use a grease gun with one hand, even the little one, especially when the weather is cold and the grease is thicker. it's not a cheap item, but what pushed me to finally buy it was trying to grease ball joints and such... some nitwit at Ford decided to save 17 cents and not put zerks on grease point, so i need a needle to go through the boot...and you need one hand to hold the needle in place, the needle opening is tiny and the grease is thick - just couldn't do it.... for my purposes, i'm hoping it will last a long time, since it's not in constant use. but great review - watched another where the guy tried to put the grease tube in the wrong way, rather than unscrewing the tube from the machine... apparently didn't RTFM.
I put a lock n lube trigger tip on mine for easy install and uninstall on the grease zerks
Looking Good. thanks TRZ 👍
Thanks Boiled!
Has anyone tried to change the tip on these Grease Guns? Dewalt told me you can not remove the tip that's on them. I want to replace the tip with one of those new level action tips.
Can you load BULK grease into this thing? (without the tube?)
Would be nice to see a tool duel milwaukee grease gun vs DeWalt
Very nice video and DEWAL 20V MAX Cordless Grease Gun my brother something new to me wow it's awesome take care later :)
Thanks TJ!
Trz I am glad you used the dewalt grease gun to stop trz from coming to your house lol
Haha, that trz is a real pain in the butt Richard
I would like to see it used on something more heavy duty such as pushing out the idler on a 20t digger track!
Just got done tightening D8 tracks did great
It does on a D9 So that should be no problem
I wish I had this when my old job wanted me to grease the truck *once a week. (*did not happen due to laying in gravel/salty snow in -20°c. More like once a month.) Worked another job where trucks got greased at 20,000km or more and steering/brake components never wore out
Busco las puntas delas graserad
I just brought this. It's funny, the store said they haven't sold one of these in the past 4 years.
Batteries probably no good then
Third tube of grease and gear on motor cracked. Will see how warranty works.
Guess i should have stepped up.
Dewalt sent me a replacement motor without a hassle.Twenty minutes to replace motor and it been flawless since. Many thanks to dewalt. Will be adding more cordless 20v tools to my collection. My Makita buddy likes the dewalt stuff more and more every time he uses mine.
Technically you're not ever supposed to push the rod inside of the grease gun that's what gets grease all over your rod and all over everything else and you will never know how much grease you have left in your tube unless you leave your Rod out and let it work itself in as you're greasing
What?😅😂
Have Milwaukee M12 and don’t like it always have to prime it.
Will a 2amp dewalt battery run this ?
Yep
I have the same grease gun is it brushed or brushless
To be honest I dont really remember bro. Usually they stamp Brushless all over the tool if it is
@@ToolReviewZone I think its brushed because at the back you can see the spark
Yeah it probably is. Can see it going though very many though
@@ToolReviewZone true
Its definitely more for a mechanic or a i industrial environment. I cant imagine dragging that thing around on a roof doing a PM. Way to big. Best for a mechanic market.
Agreed gm. I think that's what they were aiming for
Another application is a industrial type factory or process equipment where the bearings are greased on a schedule
You're absolutely right I use these working on aircraft
Have one at work and I hate it, other plant has a Milwaukee. Gotta say I like the Milwaukee a lot better.
Thanks for the feedback Cody
Cody, can you tell us why?
Are you from Pittsburgh? I sense a little
Yinzer in that accent
Hahaha definitely some yinger. Moved to Ohio from the Pitt area about 9 years ago. Great ear brotha 👌
Sorry I forgot to tell you have a great turkey sacrifice day
You too buddy. Hope you and your family have a great holiday!
Your mouth wasn't moving while you were talking to the scary guy
It was almost like he was reading my mind🤔
Funny stuff.
Erwin Magaña
You wized through the most important part of the bleeder valve. That's where most of the problems occur.😊
No quick release lever on the nozzle? Pass.........
You add one dummy
It's not as loud as the video makes it sound.
what is his max presurer
10k psi
Thanks a lot
Said actually about 75 times in 7 minutes. Nice tool though.
Actually, it was 76
Actually I counted and it was actually only eight times.
Ÿ