I love this trigger. It’s such a simple upgrade but it’s the most noticeable imo. I have this on my beloved PSA blem sale rifle and it made a world of difference.
What size Hex wrench is used for the Sabre Series line up for the trigger pins? Funny, my pins were not tight at all on Sabre after only 100 round and walked out………………………….😶😶😶 Also, a closer camera shot would be really beneficial in the future. 😎
I use a lot of PSA products (triggers included) I did have one of these go "burrrrrr" and PSA advised that I did not have the set screws adjusted properly. Hopefully I got it right this time, haven't been back to the range yet to check and see.
That's a great trigger and value. Decided to try one out on the latest ar project, and it feels nice. Worked it out with dry-firing after greasing it, and broke it in. Slight grit on reset all gone in no time. Really broke-in nice. I'm happy. Thanks. 🤙🍺🇺🇸
Do you know if these instructions will work with PSA Custom AR Single-Stage Drop-In Trigger, Curved Bow? I would love to have a better trigger for my PSA AR.
Just installed this in my Radical Firearms AR15, except the flat trigger PSA version, and I literally had to tap on it with my hammer and pin removal tool to get it seated inside the lower. The holes were not lined up at all until maybe like 10 little smacks with the hammer. And now that it's in there, it's REALLY in there. Seems to function fine, but I have a feeling it shouldn't be that hard to install. Is mine perhaps defective?
@PalmettoStateArmory : when are Y'all going to make a rapid fire trigger such as an (assisted reset, binary trigger, or simulated full auto type triggers) at that famously low prices, that PSA is known for??? maybe even a 2.5-3lb single stage 3-gun trigger something like the Geissele SD-3G flat bow trigger...
The new generation triggers like you have doesn't require set screws.. I have two installed and a new one coming.. He's working on a gen 1 version, we have gen 2's
I sent mine back because the pins were undersized and I saw no set screws to hold it in place. It just rattled around. Instructions would have been nice.
I have 3 of the 3.5 lb Flat Bow triggers. They all come in under the 3.5 lb pull. And, they're Perfect! Thank you PSA!
Glad you’re enjoying it!
I have the 3.5 Flat match… perfect function. Love it.
Great to hear!
@@PalmettoStateArmoryVideos I actually want another one for my S&W 15/22. Love that PSA Match 3.5 flat AR trigger.
I love mine. Have about 800 rounds on mine and haven't had a problem. Nice crisp trigger with very light pull.
I love this trigger. It’s such a simple upgrade but it’s the most noticeable imo. I have this on my beloved PSA blem sale rifle and it made a world of difference.
Happy to hear you are loving it!
Thank you for making this video, you have saved us all from accidental felony. PSA rocks!!!
How did PSA prevent accidental felony? Does installing this trigger create potential legal issues?
Perfect video. Thank you!!! Followed the instructions, step-by-step and installation was a breeze.
You’re welcome! Glad it helped you out🫡
Great trigger and excellent video. You made an easy job even easier. Thanks for the clarity!
Glad you enjoyed it and happy to hear it was helpful!
What size Hex wrench is used for the Sabre Series line up for the trigger pins? Funny, my pins were not tight at all on Sabre after only 100 round and walked out………………………….😶😶😶 Also, a closer camera shot would be really beneficial in the future. 😎
I use a lot of PSA products (triggers included) I did have one of these go "burrrrrr" and PSA advised that I did not have the set screws adjusted properly. Hopefully I got it right this time, haven't been back to the range yet to check and see.
I got one of the flat triggers in a aero lower. It was a good snug fit inside, good drop in for the price so far.
Glad to hear you are enjoying it!
just ordered one today cant wait till it comes
Man I love this trigger
That's a great trigger and value. Decided to try one out on the latest ar project, and it feels nice. Worked it out with dry-firing after greasing it, and broke it in. Slight grit on reset all gone in no time. Really broke-in nice. I'm happy. Thanks. 🤙🍺🇺🇸
Happy to hear you're liking it.
Do you know if these instructions will work with PSA Custom AR Single-Stage Drop-In Trigger, Curved Bow? I would love to have a better trigger for my PSA AR.
Excellent demo!
Thank you for watching
Just installed this in my Radical Firearms AR15, except the flat trigger PSA version, and I literally had to tap on it with my hammer and pin removal tool to get it seated inside the lower. The holes were not lined up at all until maybe like 10 little smacks with the hammer. And now that it's in there, it's REALLY in there. Seems to function fine, but I have a feeling it shouldn't be that hard to install. Is mine perhaps defective?
Is that trigger made by Rise armament?
is it the same as rave 140?
Thx
11-8-2024
Great video, thank you!
Glad it helped!
Great video.
Thanks for the support! Glad you found this video useful.
@PalmettoStateArmory : when are Y'all going to make a rapid fire trigger such as an (assisted reset, binary trigger, or simulated full auto type triggers) at that famously low prices, that PSA is known for??? maybe even a 2.5-3lb single stage 3-gun trigger something like the Geissele SD-3G flat bow trigger...
Can you show me how to fix the geissele rail that shifted on my sabre?
Thank you
Happy to help!
Is that B5 furniture? Was wondering for so long what size hex key to use.
I need to get me one of these
Seems simple enough. Wish youd pulled in for some better closeups,but i get the jist
Is this comparable to Geissele's SSA-E trigger?
We love the Geissele SSA. The PSA Custom is a similar weight and function.
I do not see two set screws in the back of mine to tighten. So please explain?
The new generation triggers like you have doesn't require set screws.. I have two installed and a new one coming.. He's working on a gen 1 version, we have gen 2's
I like to know if this trigger would work on my ar 9mm build
It will work, but we recommend using triggers designed for AR-9s.
will the psa 3.5 drop in trigger work in my psa ar10 lower?
It will!
Need to take my lock up sabre handguard off.. why don’t you sell the necessary tool? How can i get it off??
Send us a dm on Facebook or Instagram and let us know how we can help if you could please sir.
@@PalmettoStateArmoryVideos i did this, no answer
what size is your anti walk pins
No anti walk pins?
Lock tight?
Torque specs?
Am I missing something?
Thx
11-8-2024
Can we get an ssa-e clone trigger???
🤷♂️
Why my psa 3.5lb drop trigger its wiggle a lot?
Check the torque on the set pins. See if that helps
Lok tight the anti- walk replacement pins
MM77 Approved 👍🏼 👍🏼
Can you install it on ar10?
Absolutely
Oh hell yeah put that mf thang in there
👀
I need a psa 2 stage trigger :)
That would be cool.
I sent mine back because the pins were undersized and I saw no set screws to hold it in place. It just rattled around. Instructions would have been nice.
Lok-tight would have stopped that slop.
"Summertime Q2" is almost at an end.
Where is the *SWCH?*
Please and thank you.
Stay classy my friends.
More on the SWCH coming soon 👌
Using screws to secure trigger pins is insane. The trigger housing itself should have spring clips to allow the use of standard "anti-walk" pins.
Drop in triggers are different
@@msquared9605 You can make a drop in that takes standard pins. Several companies already do.
@@FierceMouse Because screws can back out and the issue of trigger pins walking out was already solved nearly 60 years ago.
Good ol blue lok-tight.. Awesome stuff.
Not a very good camera angle
installing an auto trigger is a totally different process anyway 😏😉😉
dang already out of stock.
It’s a popular item. They fly fast. There will be more on the way. 😎
Wasn't impressed with the saber trigger tbh
can you guys make a binary trigger? @PalmettoStateArmoryVideos