Hello ! Just spent the whole day trying to make sense out of those x!x!xx! manual and parameter guide and searching through the web to get some help... Your videos are the most helpful i could find, thanks a lot !!!! There is one question i still haven't found the answer to though : I'd like to be able to record several tracks simultaneously and split my inputs while doing so : For exemple play the guitare and sing track 1 records the guitare track 2 the voice (with some polyphinic voice overdub) so i can then freely either use the guitare track 1 or voice polyphony track 2 to play a flute solo on top... or/and build a flute polyphony on track 3 ! Is there a way to do that on the rc 600 according to you ?
Great question, and one that gets asked quite a lot. Unfortunately, it is only possible to record one track at a time with the current firmware. Perhaps BOSS will look into an option for recording multiple tracks at the same time though, if that is possible with the unit. Hope this helps!
Oh thank you so much for replying so fast, that will save me from keeping on searching for hours... !!!! I'll have to find my way around then.... Is there a place to add my voice to this feature request from boss ? Thanks again for your videos !
I did send a mail to boss support, they confirmed what you said but it needed 3 messages from them to be clear. And refused to reply about a future update. They're so bad with communication !
Hello, at first I started using input channel 1L for my electric guitar and 1R for my Spanish guitar. But then I noticed that when I put distortion on it the guitar still sounded clean from behind. The only solution I found is to mute the 1R output. But when I do that the Spanish guitar doesn't sound to me. I saw your tutorials and those of other people but no one shows that this can be done. It would be a great help if you explain it to me by playing the instruments. Because in the other way, joining channel 1L with 1R and the same for channel 2, that way I would only have the option of plugging in 2 instruments instead of 4. Thanks for the inconvenience.
Hello, at first I started using input channel 1L for my electric guitar and 1R for my Spanish guitar. But then I noticed that when I put distortion on it the guitar still sounded clean from behind. The only solution I found is to mute the 1R output. But when I do that the Spanish guitar doesn't sound to me. I saw your tutorials and those of other people but no one shows that this can be done. It would be a great help if you explain it to me by playing the instruments. Because in the other way, joining channel 1L with 1R and the same for channel 2, that way I would only have the option of plugging in 2 instruments instead of 4. Thanks for the inconvenience.
At last an explanation that is easy to follow thanx for your time and effort really appreciated
You are very welcome! My pleasure!
Hello ! Just spent the whole day trying to make sense out of those x!x!xx! manual and parameter guide and searching through the web to get some help... Your videos are the most helpful i could find, thanks a lot !!!! There is one question i still haven't found the answer to though : I'd like to be able to record several tracks simultaneously and split my inputs while doing so : For exemple play the guitare and sing track 1 records the guitare track 2 the voice (with some polyphinic voice overdub) so i can then freely either use the guitare track 1 or voice polyphony track 2 to play a flute solo on top... or/and build a flute polyphony on track 3 ! Is there a way to do that on the rc 600 according to you ?
Great question, and one that gets asked quite a lot. Unfortunately, it is only possible to record one track at a time with the current firmware. Perhaps BOSS will look into an option for recording multiple tracks at the same time though, if that is possible with the unit. Hope this helps!
Oh thank you so much for replying so fast, that will save me from keeping on searching for hours... !!!! I'll have to find my way around then.... Is there a place to add my voice to this feature request from boss ? Thanks again for your videos !
I did send a mail to boss support, they confirmed what you said but it needed 3 messages from them to be clear. And refused to reply about a future update. They're so bad with communication !
Hello, at first I started using input channel 1L for my electric guitar and 1R for my Spanish guitar. But then I noticed that when I put distortion on it the guitar still sounded clean from behind. The only solution I found is to mute the 1R output. But when I do that the Spanish guitar doesn't sound to me. I saw your tutorials and those of other people but no one shows that this can be done. It would be a great help if you explain it to me by playing the instruments. Because in the other way, joining channel 1L with 1R and the same for channel 2, that way I would only have the option of plugging in 2 instruments instead of 4. Thanks for the inconvenience.
How do you still have that giant LCD blob set to flash? That was the very first thing I changed lol!
😄 something I have come to live with in my life!
Hello, at first I started using input channel 1L for my electric guitar and 1R for my Spanish guitar. But then I noticed that when I put distortion on it the guitar still sounded clean from behind. The only solution I found is to mute the 1R output. But when I do that the Spanish guitar doesn't sound to me. I saw your tutorials and those of other people but no one shows that this can be done. It would be a great help if you explain it to me by playing the instruments. Because in the other way, joining channel 1L with 1R and the same for channel 2, that way I would only have the option of plugging in 2 instruments instead of 4. Thanks for the inconvenience.