Hi guys! You asked a lot for this, I've been working on it and today I can post the first video with the computer case washed with soap and water 🤩 It doesn’t look like a big deal, but I really wanted to find a good setup to make it done. So thanks to everyone of you who asked for it. Hope you will enjoy the video ❤ Ho! And if you liked this video, please remember to: - Like it 👍 - Tell me what you think about it in the comments section 😍 - Share it on the social medias 😘 - Subscribe ❤ - Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷 Kisses from France 🇫🇷 Love you all! ❤
Hello Again. Once again a truly outstanding video, and the quality wow!!! The spiders don't worry me so much, but its the amount of dust yuk!!.. Thank you so very much again for all your efforts. I have learned so many different things from each and everyone of your videos, now all my family and friends get me to clean there's, but each and every clean now gets easier and easier and its very relaxing and satisfying with the end results. Till the next one my friend all the very best..😊👍
Wow, thank you so much DR 3510 ❤️❤️ My initial goal with this channel was making relaxing/satisfying videos, and didn't even expect that it can help you guys to clean their own PCs... that so cool to know this 🤩 Your comment really touch me, even had chills when reading it to be honest 😅 Glad to have people like you around me, hope you will continue enjoy my work, will do my best for it. Hi from France🇫🇷 to all your family, and a special thanks for you ❤️
A small tip, if you are screwing into plastic (like the power supply fan) it helps a lot to turn the screw in the loosening direction first until you feel it "fall into place", then tighten it. This way, you are re-using the original screw threads instead of digging new ones, and screwing it in will be much, much easier and take far less force. It's also better for the longevity of the screw hole :) This applies to anything that screws directly into plastic!
@@yurieu5872 yes, exactly. You'll feel the screw "fall into place", and then you can start tightening it, without damaging the plastic you are screwing it into.
Loved the video, a small tip, compressed air can's are supposed to be used perfectly vertically, this should prevent the liquid from spilling. Its a small detail, but it made crazy every time it spilled kkkkkk
Hi Angelo! I didn't know that to be honest, will do my best to avoid this on the next videos. Thanks for sharing you tip here. In fact I should buy an air compressor. I use too much of there air duster 😅 Great to know that you loved the video.Thanks for your comment ❤️❤️
yeah! I'm not a fan of these electric air duster to be honest. I would go for an air compressor, but I have to find the one with a good balance between price and quality
@@french.satisfactory Or...you could do what I do and use the exhaust port end of my cheap but VERY powerful wet/dry shop vac and blow the living hell out of the dust right out of the whole PC all at once. But DO IT OUTSIDE...preferably on a neighbor's lawn/flower bed that you HATE! 😈🙄 I also own a Sears 5 gallon compressor with attachments for those individual components. You could also hire a small group of midgets to personally blow the dust out too as there are not too many jobs available for midgets these days I here, since the Wizard of Oz was made many DECADES ago.....🙄🙄😁😁 PS: Nice video by the way! I am subscribed! 👍👍
Sorry didn't even see the notification for this comment, maybe because of your midget joke 🙈 Happy to know you liked the video, and welcome on board! hope you will enjoy the coming ones ❤️❤️
Nice lime-green PSU fan XD. Man, if you put another stick of RAM in this thing, and maybe a GT 1030, you have a nice little budget gaming PC! Great to see another video!
Yeah i planed to add some ram inside before giving it back to his owner. oh! juste realised that you are now a "Top Commenter" Volvo240 🤩 Looks like it is because I gave you plenty hearts thanks to all your comments ❤️ GG Volvo240 and thanks to be here ❤️
you get straight to the cleaning and its fast. I thought you would have 1M subscribers but your so underrated. my little roblox videos got views that you deserve instead
Hi began, I opened this channel only 6 months ago so I'm already pretty happy with the stats. I can't imagine having 1M subscribers one day, but who knows? 🤩 Thank you so much for your comment, it's so nice to read one like this when you wake up ❤️❤️
I watched every video you made. and you are absolutely the best i have seen yet. Thanks for making these videos for all of us to watch you do your work.
Hi, it's me again. Im more than happy to provide some aditional feedback as requested. First of all thank you for adressing comments, it shows you care about your content and the people watching and makes me glad I found this channel. As for this video I think it feels a lot more smooth to watch (even though it has way more cuts than I would like) the fast forward its a good way to keep the video going without hurting the edit with cuts as I know video length and retention play a part in this. Overall it strikes me like a one of those ancient stuff restoration videos (I watch a lot of those) just a bit shorter. My only suggestion if any would be to spend just a bit more time on parts like motherboard cleaning to really smooth it out and... well this is more of a personal issue since I use big speakers but that humming noise in the background it's too loud and not very pleasant... In any case, thank you again for your content. I know there is a ton of people that like watching computers getting cleaned on yt but not many youtubers that can offer such quality... this is the good stuff.
Hey Soortes! Nice to read your feedback, and thanks for your time! I see what you mean. The next video i just finished to edit will be published in some hours. I guess it's more close to what you say, but I still have work to do on all of this because I'm still not fully happy with the result. And that that humming noise will make me crazy 🤪. I know this and I'm working on it but yeah... still didn't find the good way to just remove it. added to that, I will have to check the stats of the video to see if people like the updates. The thing is, I have to admit that I have to upload not perfect videos and doing the improvement time after time. If it try to do perfect stuff, I will never upload 😅 Thanks again for your feedback. Nice to have you in board and hope you will enjoy the incoming contents. ❤️❤️
I upload videos every 2 Friday ✌️ It take me so much tike to make one, I can't upload more for the moment 😅 Thank you very much Udesha Jayashan for your comment ❤️❤️
Well, I did it here 7:51 for the front panel and here 8:26 for the case fan. But yeah, I didn't use water and soap, especially for the front panel who have electronic parts. I should maybe just remove these before doing a deep cleaning with water and soap when it's possible. Will think about this for the next episode.
Pretty sure that the mother board has a bent pin at the bottom right of the socket, you can see it laying over at 6:54. Not you're fault sense it was like that before hand but great job on cleaning it up.
Mhhh, I guess you are pretty right, I can see something unusual on the video too, but everything worked well on the launch test so... I'm curious to know what could happened now 😅 Or is it a real issue?! anyway.. Thanks a lot for your very first comment on this channel Mark! Nice to know you enjoyed ❤️
It exploded 😱 But is it something usual for this brand? I mean, you was maybe not lucky with this PSU? Thanks for your comment Vojtech Adame, hope you liked the video ❤️
Saut dj puic puic! sympa de te revoir dans la section des commentaires ❤️ En effet, je ne fait aucune amélioration sur ce poste non plus. Je me focus vraiment sur le nettoyage et les prises de vues. Mais je pense que je vais bientôt intégrer les upgrades dans les videos ✌️
Hi The Red Fox! Yeah you are right. This processor deserve more Ram. I will see if I can add some before giving it back to his owner if I can. Thanks for your comment ❤️
I realize that those of us who build and repair PCs are a niche crowd, but it surprises me how nasty people let their PCs get. I typically take my electric duster to my rig every 3 months or so, and all it ever has is a light layer of dust. Seeing heatsinks absolutely clogged with dust and garbage makes my skin crawl... 🤮. I do enjoy seeing a neglected computer get some much needed tlc, so kudos for that!
Yey some people are afraid to open their computer I guess. So when it's a smoker... and after some years... well, it makes a good computer for this channel 😅 Thanks a lot for your comment Matt Westling ❤️❤️
Unfortunately, making an episode take me 2 days full of work. With my main activity, I can't imagine yet publish more than one video every 2 week for the moment. But thank you so much 10th gamer for your nice comment ❤️❤️
Hi Gunstar Prime 2.0! Good question, i didn’t ask to it’s owner, but the DVD drive is from 2015. So we can guess that you are pretty right. I don’t think he already cleaned it in the past so, here we are 😅 Thanks for your comment ❤️
Mmmh, the thing is, Windows no longer supports Windows 7, which makes this OS not fully usable on a daily basis... Thanks for all your comments, SnowKittyPro! ❤️❤️
Hi Yurieu! That's one of the 2 parts I currently have an hesitation on my videos. I try to find a good balance between dynamism and boring. It's also the case for the cuts I'm often doing in the video editing. I tried to make the cuts abit more smooth in the episode, did you feel it? About the speed parts, you are talking about the parts where I really brush, clean and screws right? Thanks a lot for sharing your thinking about this topic, it is really interesting to have another view on it.❤️
@@french.satisfactory the screw and brushes. Use a electric screwdriver, or soak clean those parts maybe? Maybe just do your thing without fast forwarding? Keep going awesome videos
mmmh, I still have to think about all of this. But thanks agin for sharing your thinking. These comments are really precious for me. I often make improvements on my videos based on them.❤️
@@french.satisfactory you'd be amazed how many people like to leave their side panels open for better cooling... Or just never put it back on after installing an upgrade
I would love but it's a bit complicated to find interesting computers to clean 😷 so I'm doing these ones I finally find. But for sure it is missing in this channel, will do my best ✌️
Hi 10th gamer! I know there is people who are cleaning almost all the computer with water and soap, and I guess it's really possible. But I don't know, every time I watch this, I want to die inside 😅😅 Not sure I will do this. But I'm curious to have your thinking about this guys. Thanks for your comment BTW ❤️
Yes but if you wash it with water you need to wait a few days until it dries completely and it could also start corroding in the metal ports area. The best way to clean a motherboard is to use a can of contact cleaner....directly spray it on the motherboard,eats any corrosion and it will shine like brand new. Takes about 5 mins for it to fully dry
![OLD HP Desktop DEEP CLEANING [4K] (HP Pavilion a6322fr)](http://i.ytimg.com/vi/hwkIk6D5JQo/mqdefault.jpg)
![OLD HP Desktop DEEP CLEANING [4K] (HP Pavilion a6322fr)](/img/tr.png)
Hi guys! You asked a lot for this, I've been working on it and today I can post the first video with the computer case washed with soap and water 🤩
It doesn’t look like a big deal, but I really wanted to find a good setup to make it done. So thanks to everyone of you who asked for it. Hope you will enjoy the video ❤
Ho! And if you liked this video, please remember to:
- Like it 👍
- Tell me what you think about it in the comments section 😍
- Share it on the social medias 😘
- Subscribe ❤
- Follow me on Instagram for more content: instagram.com/french.satisfactory/ 😷
Kisses from France 🇫🇷
Love you all! ❤
Hello Again. Once again a truly outstanding video, and the quality wow!!! The spiders don't worry me so much, but its the amount of dust yuk!!.. Thank you so very much again for all your efforts. I have learned so many different things from each and everyone of your videos, now all my family and friends get me to clean there's, but each and every clean now gets easier and easier and its very relaxing and satisfying with the end results. Till the next one my friend all the very best..😊👍
Wow, thank you so much DR 3510 ❤️❤️
My initial goal with this channel was making relaxing/satisfying videos, and didn't even expect that it can help you guys to clean their own PCs... that so cool to know this 🤩
Your comment really touch me, even had chills when reading it to be honest 😅
Glad to have people like you around me, hope you will continue enjoy my work, will do my best for it.
Hi from France🇫🇷 to all your family, and a special thanks for you ❤️
A small tip, if you are screwing into plastic (like the power supply fan) it helps a lot to turn the screw in the loosening direction first until you feel it "fall into place", then tighten it. This way, you are re-using the original screw threads instead of digging new ones, and screwing it in will be much, much easier and take far less force. It's also better for the longevity of the screw hole :)
This applies to anything that screws directly into plastic!
Hi ypoora1!
Interesting tip, didn't know this. Thanks for sharing it. Nice to see you back in the comments section for this video ❤️❤️
Counter clockwise first then clockwise?
@@yurieu5872 yes, exactly. You'll feel the screw "fall into place", and then you can start tightening it, without damaging the plastic you are screwing it into.
Loved the video, a small tip, compressed air can's are supposed to be used perfectly vertically, this should prevent the liquid from spilling. Its a small detail, but it made crazy every time it spilled kkkkkk
Hi Angelo!
I didn't know that to be honest, will do my best to avoid this on the next videos. Thanks for sharing you tip here. In fact I should buy an air compressor. I use too much of there air duster 😅
Great to know that you loved the video.Thanks for your comment ❤️❤️
I would definitely invest in a compressor or air duster for electronics it'll save you hundreds on canned air
yeah! I'm not a fan of these electric air duster to be honest. I would go for an air compressor, but I have to find the one with a good balance between price and quality
@@french.satisfactory Or...you could do what I do and use the exhaust port end of my cheap but VERY powerful wet/dry shop vac and blow the living hell out of the dust right out of the whole PC all at once. But DO IT OUTSIDE...preferably on a neighbor's lawn/flower bed that you HATE! 😈🙄
I also own a Sears 5 gallon compressor with attachments for those individual components. You could also hire a small group of midgets to personally blow the dust out too as there are not too many jobs available for midgets these days I here, since the Wizard of Oz was made many DECADES ago.....🙄🙄😁😁
PS: Nice video by the way! I am subscribed! 👍👍
Sorry didn't even see the notification for this comment, maybe because of your midget joke 🙈
Happy to know you liked the video, and welcome on board! hope you will enjoy the coming ones ❤️❤️
The cleanest case so far! And it was nice of your friend's father to offer somewhere for homeless insects to live.
Thank you so much for your comment MarkTheMorose. Nice to have you here since 4 months already ❤️
Nice lime-green PSU fan XD. Man, if you put another stick of RAM in this thing, and maybe a GT 1030, you have a nice little budget gaming PC! Great to see another video!
Yeah i planed to add some ram inside before giving it back to his owner.
oh! juste realised that you are now a "Top Commenter" Volvo240 🤩
Looks like it is because I gave you plenty hearts thanks to all your comments ❤️
GG Volvo240 and thanks to be here ❤️
you get straight to the cleaning and its fast. I thought you would have 1M subscribers but your so underrated.
my little roblox videos got views that you deserve instead
Hi began,
I opened this channel only 6 months ago so I'm already pretty happy with the stats. I can't imagine having 1M subscribers one day, but who knows? 🤩
Thank you so much for your comment, it's so nice to read one like this when you wake up ❤️❤️
I watched every video you made. and you are absolutely the best i have seen yet. Thanks for making these videos for all of us to watch you do your work.
yey, happy you enjoyed the videos Joe jones 🥰
Thanks a lot for your comments ❤️❤️
Great job! The video quality just gets better and better with every single video you release! Wish the best for your channel.😀
Thank you so much minerva! so nice to read such a comment! Happy to know that you enjoy my content ❤️❤️
Getting better the videos. Congrats
Yey thank you very much Ramon ❤️❤️
Always love the cleaning videos and got me the oil for my fans today at the store thanks for the recommendation
yey lil_Ed, nice to read that you got oil for you PC! Thanks for your comment ❤️
I just realized I have the same motherboard in my old PC, what a coincidence! Anyways, great video!
thank you Dark_Epic_ ❤️❤️
Nice cleaning video on the end of my day 😁 thank you 👍.
Stay positive everyone 😁
Thank you very much @ACOnetwork . Everytime nice to read a comment from you ❤️ Love from France ❤️🇫🇷
Hi, it's me again. Im more than happy to provide some aditional feedback as requested.
First of all thank you for adressing comments, it shows you care about your content and the people watching and makes me glad I found this channel.
As for this video I think it feels a lot more smooth to watch (even though it has way more cuts than I would like) the fast forward its a good way to keep the video going without hurting the edit with cuts as I know video length and retention play a part in this.
Overall it strikes me like a one of those ancient stuff restoration videos (I watch a lot of those) just a bit shorter.
My only suggestion if any would be to spend just a bit more time on parts like motherboard cleaning to really smooth it out and... well this is more of a personal issue since I use big speakers but that humming noise in the background it's too loud and not very pleasant...
In any case, thank you again for your content. I know there is a ton of people that like watching computers getting cleaned on yt but not many youtubers that can offer such quality... this is the good stuff.
Hey Soortes! Nice to read your feedback, and thanks for your time!
I see what you mean. The next video i just finished to edit will be published in some hours. I guess it's more close to what you say, but I still have work to do on all of this because I'm still not fully happy with the result.
And that that humming noise will make me crazy 🤪. I know this and I'm working on it but yeah... still didn't find the good way to just remove it. added to that, I will have to check the stats of the video to see if people like the updates.
The thing is, I have to admit that I have to upload not perfect videos and doing the improvement time after time. If it try to do perfect stuff, I will never upload 😅
Thanks again for your feedback. Nice to have you in board and hope you will enjoy the incoming contents. ❤️❤️
É muito bom ver um ótimo trabalho sendo reconhecido!! Parabéns 👏
Thank you very much Chorume, really appreciate ❤️❤️
Awesome cleaning dude 😎👍👍
Thank you very much toasty beard 🥰❤️❤️
@@french.satisfactory no worries dude keep up the awesome cleaning
❤️
I can't wait to watch your next video.Please upload your next video quickly
I upload videos every 2 Friday ✌️ It take me so much tike to make one, I can't upload more for the moment 😅
Thank you very much Udesha Jayashan for your comment ❤️❤️
Just like always great upload 🙂
Thanks a lot Rohaan420 ❤️❤️
@@french.satisfactory btw one question tho why don't u wash all the plastic parts 🤔
mmmmh? I cleaned all the parts? what parts exactly are you talking about?
@@french.satisfactory lie the front panel and the case fans
Well, I did it here 7:51 for the front panel and here 8:26 for the case fan. But yeah, I didn't use water and soap, especially for the front panel who have electronic parts. I should maybe just remove these before doing a deep cleaning with water and soap when it's possible. Will think about this for the next episode.
Beau taf que ce soit pour les pc et pour les vidéos en elle même !
Merci à toi Fury! ça fait plaisir ❤️❤️
great sound effects
Nice to know you like it any jo jinkerson ❤️
I still have to improve the sound of my videos, I'm working on it ☺️
Pretty sure that the mother board has a bent pin at the bottom right of the socket, you can see it laying over at 6:54. Not you're fault sense it was like that before hand but great job on cleaning it up.
Mhhh, I guess you are pretty right, I can see something unusual on the video too, but everything worked well on the launch test so... I'm curious to know what could happened now 😅 Or is it a real issue?! anyway..
Thanks a lot for your very first comment on this channel Mark! Nice to know you enjoyed ❤️
What is the name of that spray that you are using for cleaning...?
Hi Vilakhoto, i am using compressed air cans to remove dust. You can find all the infos in the video description.
Hope you enjoyed this video ❤️
The power supply... I´ve seen one of those Advance PSUs exploding, so you should probably replace it with something reliable.
It exploded 😱 But is it something usual for this brand? I mean, you was maybe not lucky with this PSU?
Thanks for your comment Vojtech Adame, hope you liked the video ❤️
Very nice.
❤️❤️
I enjoy so much your videos
Thank you so much!! really appreciate ❤️❤️❤️
toujour top ton nettoyage du pc mais dommage que tu mais pas de ventirade a derrière et devant
Saut dj puic puic! sympa de te revoir dans la section des commentaires ❤️
En effet, je ne fait aucune amélioration sur ce poste non plus. Je me focus vraiment sur le nettoyage et les prises de vues. Mais je pense que je vais bientôt intégrer les upgrades dans les videos ✌️
@@french.satisfactory ok
What brand vacuum cleaner is that?
Hi Anam Amer,
it is a Dyson v11 Torque Drive Extra ✌️
Nice to read your first comment in this channel. Hope you enjoyed the video ❤️
Hola my friend qual e o nome deste produto em aerossol spray que vc usa.?Seria Álcool isopropílico spray??
Hi CANAL GADGETS UTEIS,
This is just compressed Air Dusters to remove more dust.
Hope you enjoyed the video ❤️
*while cliping fan on hears distorted cat meowing
hehehe That maybe the 1st sign cats started to control this world 😉
What kind of vacuum are you using?
Hi DIPPY!
i am using a Dyson v11 torque drive extra.
Hope you enjoyed the video ❤️
@@french.satisfactory Yeah your channel is awesome. Just subscribed to this. Keep at it!
Yey! welcome on board then ❤️❤️
Nice ! 👏🏻
Thank you MrsWoodwinked ❤️
i3 3225 might need more ram
Hi The Red Fox!
Yeah you are right. This processor deserve more Ram. I will see if I can add some before giving it back to his owner if I can. Thanks for your comment ❤️
goddamn now i can see the spider web ultra clear
*clicks on 480p
😂 Great to see you back in the comments section Vrez ❤️
Sometimes i wonder for some reason how does the computer finally feel after this
I would just say better 😎
Nice job
Thanks Vishnu ❤️
the pc was in awful condition but awesome work as always
Thank you very much the Fan shelf ❤️❤️
I realize that those of us who build and repair PCs are a niche crowd, but it surprises me how nasty people let their PCs get. I typically take my electric duster to my rig every 3 months or so, and all it ever has is a light layer of dust. Seeing heatsinks absolutely clogged with dust and garbage makes my skin crawl... 🤮. I do enjoy seeing a neglected computer get some much needed tlc, so kudos for that!
Yey some people are afraid to open their computer I guess. So when it's a smoker... and after some years... well, it makes a good computer for this channel 😅
Thanks a lot for your comment Matt Westling ❤️❤️
@@french.satisfactory please try upload videos dayli . I vet whaching your new video's
Unfortunately, making an episode take me 2 days full of work. With my main activity, I can't imagine yet publish more than one video every 2 week for the moment.
But thank you so much 10th gamer for your nice comment ❤️❤️
Bro you use isoprohol alcohol to clean the lens or laser whatever it is of the optical drive.
Nope for the lens, I am using a cleaning window spray. But yeah, to clean the electronic components, I am using isopropyl alcohol ✌🏻
kudos on using a plastic container in cleaning the case to save water!
Thank you Ber Bum! ❤️
That's more case than computer.
I would even say the front panel 😉
Thanks for your comment Jeremy ❤️
I'm watching this video using the same motheboard lol
Hehehe, we’ll it’s a pretty decent one. Hope you enjoyed the video.
Thanks for your comments Rene ❤️
WHAT? MY MOTHERBOARD DOES NOT HAVE A SPECIAL INPUT FOR SOUND OR PRINTER
🤣 nice to know that this video helped you a bit to know more about your motherboard ✌🏻
Dear Lord, how old is this laptop? (seriously, it must've taken 5 or 6 years)
Hi Gunstar Prime 2.0!
Good question, i didn’t ask to it’s owner, but the DVD drive is from 2015. So we can guess that you are pretty right.
I don’t think he already cleaned it in the past so, here we are 😅
Thanks for your comment ❤️
Very nice
Thank you very much Danang Tech ❤️
vous devez télécharger souvent donner à l'ordinateur
mmmh ? je ne comprend pas vraiment le sens de cette phrase désolé 😅
Windows 7 would be perfect for this pc
Mmmh, the thing is, Windows no longer supports Windows 7, which makes this OS not fully usable on a daily basis...
Thanks for all your comments, SnowKittyPro! ❤️❤️
👏🙂
😍❤️
awesome shit
Thank you very much Владимир Киосев ❤️
Dude your videos are so good but don’t speed them up the next time ok, it breaks the immersion.
Hi Yurieu!
That's one of the 2 parts I currently have an hesitation on my videos. I try to find a good balance between dynamism and boring. It's also the case for the cuts I'm often doing in the video editing.
I tried to make the cuts abit more smooth in the episode, did you feel it?
About the speed parts, you are talking about the parts where I really brush, clean and screws right?
Thanks a lot for sharing your thinking about this topic, it is really interesting to have another view on it.❤️
@@french.satisfactory the screw and brushes. Use a electric screwdriver, or soak clean those parts maybe? Maybe just do your thing without fast forwarding? Keep going awesome videos
mmmh, I still have to think about all of this. But thanks agin for sharing your thinking. These comments are really precious for me. I often make improvements on my videos based on them.❤️
😎😎
❤️❤️
Please put windows 11 on it
You really want this Windows 11 😂
I got this PC from a friend's father, so I will not change anything from it 😅
But thanks for the comment ❤️
@@french.satisfactory ok
nice
Thank you Fauji Enter ❤️❤️
Pretty gross but not as gross as The rat's nest I had to clean out one time...
😱 what? is this possible ?
I guess if the case is opened it is ?!
Mice and cockroaches love to make nests in consoles and computers... It's pretty gross worst part is they chew the cables
@@french.satisfactory you'd be amazed how many people like to leave their side panels open for better cooling... Or just never put it back on after installing an upgrade
yeah I know that they like et cables. Make sens
Try to find a nasty gaming computer 😮
I would love but it's a bit complicated to find interesting computers to clean 😷 so I'm doing these ones I finally find. But for sure it is missing in this channel, will do my best ✌️
I like water washing please you wash matharbord using water in next video
Hi 10th gamer!
I know there is people who are cleaning almost all the computer with water and soap, and I guess it's really possible. But I don't know, every time I watch this, I want to die inside 😅😅
Not sure I will do this. But I'm curious to have your thinking about this guys.
Thanks for your comment BTW ❤️
@@french.satisfactory ok
@@french.satisfactory 😍
Yes but if you wash it with water you need to wait a few days until it dries completely and it could also start corroding in the metal ports area. The best way to clean a motherboard is to use a can of contact cleaner....directly spray it on the motherboard,eats any corrosion and it will shine like brand new. Takes about 5 mins for it to fully dry
@@Mirra2003-f9s 😇