Thank you for taking the time to make this video sir. The steps you provided and tips you offered are well appreciated. Thanks for having the will power and dedication not to run out at 6:24 and flag down the ice cream man. You're a trooper.
Thanks for saying that about the washers only being on left side. KTM parts schematic only shows the one side, so I'd assumed the other was a mirrored setup, but no. Thanks for clarifying! Wondered if I was shorted the parts in the kit I bought!
I did seal installation the same way. Just a tip: on the chain side, you might want to put in the inner sleeve after the washers, BEFORE pressing in the seals. I did not put the sleeve in for pressing and the spacers got offset a bit, so the sleeve sits a bit tight. Still able to push it in by hand, but requires some force...
thanks for this video! I see that there are number on one side of the bearing, you wrote "facing against washer" so that mean that always facing to external correct? thanks
ha just wondering my linkages I'm trying to get bolt of the frame its loose and turns but still won't come out will heat help get it out with centre punch
Thank you for taking the time to make this video sir. The steps you provided and tips you offered are well appreciated. Thanks for having the will power and dedication not to run out at 6:24 and flag down the ice cream man. You're a trooper.
Thanks for saying that about the washers only being on left side. KTM parts schematic only shows the one side, so I'd assumed the other was a mirrored setup, but no. Thanks for clarifying! Wondered if I was shorted the parts in the kit I bought!
I did seal installation the same way. Just a tip: on the chain side, you might want to put in the inner sleeve after the washers, BEFORE pressing in the seals.
I did not put the sleeve in for pressing and the spacers got offset a bit, so the sleeve sits a bit tight. Still able to push it in by hand, but requires some force...
Where can i buy this tool? The website mentioned in the description seems to be offline.
for the guys who don't have shit laying about nevermind.....this was the only vid with 2 bearings per side. thanks
Where can you buy the tool? I have tried the web site address without success? Thank you, Mark
thanks for this video!
I see that there are number on one side of the bearing, you wrote "facing against washer" so that mean that always facing to external correct? thanks
Question- Is it normal for the right side to have some side to side play when the final barrel is installed? Thanks
Does Ktm only use that outer seal and not a dust seal as well
What happens when you have rusted to shit bearings
Cheers for this, just ordered one of your tools.
ha just wondering my linkages I'm trying to get bolt of the frame its loose and turns but still won't come out will heat help get it out with centre punch
Had the same issue on my 2014xc used bb blaster soaked hit it with a big pointy punch
On a weird angle end up taking brake off
Morgans tools usefulness..thanks TH-cam
How would I get hold of this tool please
Making more now. will be available on ebay from monday 9th march.
Where could I buy the tool you're using ?
www.morgans-tool.co.uk on the "How do I buy one?" page
Is that an ice cream truck I hear!
Useful vid cheers 👍
awesome video...great tool
Ice cream truck proving it's not AI generated. 😅🎉
Great video Thanks!
No GREASE at all on this procedure? Guess you'll be using that tool pretty often!! ha ha
Fernando Biondi I saw him grease but he didn't explain a dam thing.
Guy talks way too much!