Deta Doorbell to Ring Wired Doorbell 2021 (Direct Transformer Install)
ฝัง
- เผยแพร่เมื่อ 20 มิ.ย. 2021
- In this Video I am going to replace my Deta Doorbell with the Ring Wired 2021 version:
/ ahcmeuk
www.etsy.com/uk/listing/10248...
www.amazon.co.uk/ring-video-d...
www.amazon.co.uk/Navaris-Door...
www.amazon.co.uk/GREAVES-CO-E...
![บุษบา - วงชานเมือง [LiveCoverVertion] Original : เมนทอล](http://i.ytimg.com/vi/Dm81sKcd9rs/mqdefault.jpg)
I have no idea how this video has been viewed so many times and "Liked" so few. Maybe people watching multiple times, but I am so grateful for this bud. Easy to follow and my Ring Doorbell works like a dream
Thanks for the tutorial - helped me do mine.
Thank you for this! Had the exact same setup and the Ring instructions were next to useless
Great video!
Hello, I have watched your installation video for the ring wired. All really good and easy to follow. I am going to put on order the transformer I need. Thanks. However, when I originally put up the doorbell I didn’t have brown wires poking out the the old door bell… just blue and white. How do I resolve this?
Would this also make the chime work inside off new transmitter, as well as powering the ring off the mains? Our ring chime doesn't work through the deta doorbell at the moment.
Wouldnt the old chime not work with this? i have the wired but looking for a chime to get it working
I opted for the 24VDC transformer as the ring box looks a lot smarter, thinner profile and pretty much the same size as the old Deta box
Hi my bell transformer reads 230 V 50/60 Hz
8V- 1A
12V- 0.66A
Is it ok if If buy ring doorbell with chime ?
I am based in UK
Amazing video :Amazing video. Do you reckon I can make the same wiring possible for another video door bell which is non-Ring (like the Eufy door bell dual wired, that I got from the US? Thanks
Hi
Thanks for the video,
Please tell me why when i was changing the transformer there was only 2 wires to the doorbell , you have too many ,where do i put my 2 wires in the transformer to get 24 v
Thanks
I only have blue& white wires where do I place them they are no twisted together ect ?
Looks like I have the same deta set up as you....Just about to purchase the ring doorbell 4 and transformer. What's the chances of shoehorning that transformer into the existing Deta box? I've just decorated around it so it would look good if I had to remove the full thing
Did you fit the transformer into the Deta box? I am looking to do the same and don't want to remove it.
Same, any more info @md20120?
Shouldn't they be connected to 0v and 24v connectors?
I bought this transformer to fit my wired ring doorbell and it was fine for the first day. Now there’s an audible humming coming from it, is that normal?
All transformers make some noise, if it's too loud for you, then get a transformer that's from a well known brand, or buy the official ring transformer which is £20
Should doorbell cable goes to 12v and 24v , not in to 0v and 24v ?
I did 12 and 24 as can be seen in vid seems fine
@@AhcMeUk It should be wired neutral to 0 and live to 24v
@@AhcMeUk While it will work having 12V and 24V terminals, it is good practice to use 0V and 12V instead
Cant it work with the old deta box? I just got this doorbell and connected it up to the existing doorbell and it powers on, it just wont connect to the network, any ideas?
No the Deta is the wrong voltage. Deta is 220-240v 50hz DC and you need AC so a different transformer is needed.
@@AhcMeUk man ive been going out of my mind since monday, it powers on but it wont connect to the network it goes through all the setup to that bit then nothing, just tried again and now its stuck in a boot loop, flashes twice then clicks sounds like its taking a picture, might just bin it and get a wireless one
I tried a regulated 12v dc supply with this bell first and had the same symptoms (powered up but would not connect the the app) The app stated it was a power supply problem. Tried a 12v a.c. supply (actually, I used the same d.c. supply, but connected to the transformer, effectively by-passing the rectifier) and the bell connected to the app first time. So in other words the bell seems to need an a.c. supply to connect.
I have since found out this bell WILL work with a d.c. supply, but it needs to be 24v, not 12v.
@@Bigdogchay I've recently fitted one of these, read my other comment. Worked a treat for me and same situation...
Didn't think I need to buy this transformer should of just bought the battery one haha
I have an old multi voltage transformer with Earth, 4v and 8v to get 12v you wire the 4v & 8v together giving you the 12v. If your transformer works the same way you'd be putting 36v through your Ring doorbell.
Nope 13v as you can see in the ring app the voltage stats.
any idea why my transformer is making a slight humming noise
I have the same problem the humming noise from the transformer
Needs a positive and negative 0v negative 12v or 24v positive
Anyone know if the chime volume can be changed on these Deta units? I cant see any knobs or anything in there. Its too loud it scares my cat 😂
It’s a really good purchase. I have been thinking about getting one, but I don’t know if it’s good
Amazing
My parents will just say, dO wE rEaLlY nEeD aNoThEr “uSeLeSs” pIeCe oF tEcHnOlOgY
Why do some videos show them using cat5 cable and others normal bell gauge wire?
Pls can someone we explain this to me because I am baffled.
I have followed these instructions but my transformer has started making humming noises. Why is that? I am using the same transformer as you have.
Hi did you mange to sort the humming? As I'm having same issue could you help ?
@@shauntaylor5248 Get a good well kneon brand transformer. You can get the official ring din rail transformer for £20
Am I being daft... can't you just stick the transformer in the old casing?
Guess you could.
All the wires going to my original doorbell transformer are white :(
pretty easy
I'm confused. I thought the point was I could wire up the ring doorbell to the existing doorbell wires and the ring would make the delta chime ring. No needing to pull chimes off walls or fit transformers etc..
Nope different wires and voltage etc
Please come and fit mine 😂😂
I paid £27.50 for this doorbell and it came with an echo dot