ATR 72 & 42 - Full Flight Tutorial & Simbrief Profile | Cold & Dark to Landing in MSFS 2020
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- In this video, we take you through the set up from cold and dark of the newly release 'Expert Series' ATR 72-600 for MSFS. Lots of detail has gone into this aircraft which allows you to set up the aircraft realistically for a fully operational flight. This tutorial will guide you through a short flight from cold and dark to landing as we take a short trip in the Canaries. This video also looks at setting up your thrust levers and also provides a fully working simbrief profile for the aircraft which you can download below.
ATR 72-600 SIMBRIEF PROFILE DOWNLOAD:- dispatch.simbr...
FREQUENT FLYER? You can now join the Easyjet Sim Pilot Channel & become a member, earning you extra perks along the way:- • Supporting the Easyjet...
DISCORD LINK:- / discord
Channel supported by:-
Thrustmaster:- www.thrustmast...
Orbx:- orbxdirect.com/
Aerosoft:- www.aerosoft.c...
REX Simulations:- rexsimulations...
Flightbeam:- www.flightbeam...
Macco Simulations:- maccosim.com/
Livery Creator:- flightsim.to/p...
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
This is so helpful, you've saved time and frustration on setting up an unfamiliar aircraft. Thanks Nav.
Lower parking brake, you have a push bottom call HYD AUX, The function of this button is to give hydraulic pressure for a few seconds, you will see that it lights up in hotel mode, when it lights up you can activate hotel mode. Without hydraulic pressure, the propeller brake does not activate. If you need anything else, I am here. I have also flown all the variants of ATR and now an Airbus 330. Greetings and I really like your videos.
Any idea what I'm missing in my procedures here? After engine start I still have faults on the AC gens and low hyd pressures. I'm sure I'm missing something along the way but not sure what. I am NOT using ground AC Wild power as other instructors have indicated that is for maintenence only.
EDIT: For anyone else that may have the same issue as me, what I was missing was moving the condition lever to Auto after engine start (full start not Hotel mode). Finally got a copy of the FCOM and went through step by step until I found my mistake
As someone that mainly flies airbus I was able to jump right into this one as well ! its got that Airbus philosophy about the flight deck ergonomics that makes it so enjoyable !
ATR is an airbus company!
im having some issues with this aircraft and wondered if anyone could help. I use the thrustmaster tca airbus throttles but whenever i try and calibrate them in the atr the raw input value is messed up. While i am moving the throttles it works just fine but when i take my hand off it reverts back to the default idle of -15823. I've made another profile for it and tried existing ones but i can't seem to find a fix. I've tried other aircraft too and it works just fine. Did a reinstall of the aircraft this morning with no luck. Anyone know a fix?
Fantastic Gavin, thank you as ever for the guide and the SimBrief profile. Time to do some Aer Lingus and Logan Air ops... or perhaps some FlyBe Throwback Thursdays? Can't wait to see you fly this on a live stream.
If you put in fuel and payload inside the FMS, it sets correct numbers too
Have you done the Simbrief integration yet? In the init page then you type the departure arrival airports with out the forward slash in the top line, and the whole fpln populates including sids and stars.
The one thing I wanted to see in this tutorial was the one thing you forgot. When do I switch Power Management between from TO to CLB after takeoff?
Don't buy this aircraft. The prop brake is all effed up. You'll regret it. It's too bad because this is a great aircraft otherwise.
Hello, I tried to enter airways like you explained near 20 minutes. but I can only enter 5 airways + waypoint, I can not add a new page in the "airways" page. Do you know how to enter more than 5 airways->waypoint ?
04:34 It sounds like gusset lock, I think that should be gust lock!! Great video, thank you.
Salut, il y a quelque chose que je ne comprends pas lorsque je veux faire mon décollage en mettant plein gaz, une alarme allume et m’indique config mais je ne comprends pas à quoi cela correspond
Hi, I subscribed to your channel and I found this video on the ATR very interesting, I wanted to kindly ask how to check the Condition Lever 1 and 2 Fuel Shut Off,
with which button or joystick control?
Thank you
These are items you can configure in the MSFS controls menu to customise for your setup.
Be safe. Don’t fly on it until accident report. In.
Wonderful video, thanks for your time and dedication.
Not sure why you and most CC’s keep flipping the battery switch guard open before switching on the battery? This is a guard to prevent you to inadvertently switch on the emergency battery, battery ON can be selected without opening the guard.
What gives away you are not a real airline pilot is the fact that you, again as most CC’s, leave the warning lights blinking during setup. They blink for a reason, and after having checked why they are illuminated pilots will push them away as acknowledgment of the displayed failures, even if these displayed failures are expected and normal in this stage of setup. As a former airline pilot it kind of makes me cringe seeing you guys getting on without paying any notice to these warnings. Warning lights on = check why and push it to acknowledge. Don’t leave them blinking because if another real and unexpected failure occurs you will be unlikely to notice it because the warning lights are already blinking and there are already a plethora of “expected” failures listed. It is quite important to do this, and is baked into the minds and habits of every airline pilot during training. Failure to do so during a check ride will make you fail your test. Just telling you this to make you even better at what you do according to standard pilot procedures, because most of you keep amazing me with your proficiency without being ‘real’ pilots.
Anyway, I never flew the ATR but it seems fun, so I wanted to thank you for teaching me new things. Keep up the good work!
I am most certainly not a irl ATR pilot. I've no idea how to set up this bird correctly!
ciao, ho bisogno di un aiuto tutto normale, ma in volo vnav e lnav inseriti , ma non sale, grazie mi aiuti Paolo Italia
Why waist this time. Marketing?
Hello..a bit of topic. But can someone help me please?! every time i load the ATR 72 600 into the sim everything works fine. iam ready for taxi got all.. the ruders and pedals working.. as soon iam about to rotate die Airplane just turns bank angel to the left. I lierally got no controle. Airbus and other planes working fine.. stable in the air. After i checkt, i restarted the sim. Nothing changed, even if i start airborne the plane goes crazy and i got no control again. The plane just stalls or do some kamikaze shit. In the menu all settings are the same. Am i the only one with this problem..damn. Mayby someone can help me. i rlly would appreciate
very helpfull, full manual for noobs. Just one thing - I've seen ppl switch to power management to GOTO before landing in case of turn around.
Excelent Video Thank You! i have 1 question if any1 can help. I have setup the TCO Quadrant from Thrustmaster like you show us and i dont know how to cutoff the engines completly it wont let me drag the levers all the way down is that gonna be a problem or it's fine ? maybe a stupid question but i usually cutoff fuel and the engines stop and now i cant cause the lever wont stay in cutoff mode. Thank you again!
Nice video thanks. Strange that you and also others have the temperature error in the overhead. Mine is showing the correct temperature.
Mine was correct today 😕
Great video, it really helped me 👌
I have a question: The propeller setting of the throttle axis is really useful, but then I can no longer set the levers to fuel SO. Even if I physically move the lever towards zero, nothing happens. Does anyone have any ideas?
You have to move it into the reverse axis to get it to go to the feather position :)
@@daveyjamisonc Feather is no problem but from Feather to Fuel SO does not work.
@@daveyjamisonc Noticed the same for me here. Seems to be the same in this video. But have also no idea how to fix it.
Great presentation. How did you get Kilograms in MSFS?
This is set under the main simulator options panel.
When i throttle up it doesn’t seem to be getting enough power to climb. Is there something that I’m missing? I released the Gus lock and the idle bar below the throttle but it still doesn’t work. My fuel levers are set on auto too. I’ve even switched them to 100% override and still nothing.
I really enjoyed this thanks! I tried following the MSFS tutorials that they uploaded but it goes quite quick sometimes and doesnt always explain the buttons - as I novice with less than 50hrs flying I really need the extra explanation. This was perfect! Thanks again
Quite confused with the calibration of the throttle on the efb. I’m on Xbox and when I move my left throttle up or down nothing happens. Can anyone help?
I was able to engage the terrain radar. Really nice. Haven't experimented with the weather radar in poor weather yet.
Just finished a full flight. I used to have major problems landing. The plane now felt really tamed. Smooth taxi and take off. I was able to use sel speed mode to control the climb. Vnav still kinda overshoot. The plane didnt go wild while landing. Loved it.
Great guide. to get started on this plane! two questions I set up my TM airbus quadrant like you did but can't get the condition lever to go down to eng cut off after my flight. what am I missing? The other question what is the difference between EASA and FAA setting on the EFB? (besides the obvious lol)
Is this free?
how come it stops in 3 seconds and trottle response not always move, especially going down
Thanks very muchness.
Really useful.
What a good man!
Barty
thanks for the video , that hyd aux pump button has to be pressed to operate the prop brake, thats what I remember from the Flight1 atr in FS2004
Waste
ATR is made by Airbus and Leonardo, an italian company, so it should be as an Airbus!
Thank you for showing us how to setup the TCA airbus throttle!!
Hi. Very helpful. Christmas Tree lights :) One question for you (or anyone else) when you were gently adjusting the speed as you descended towards the threshold are you using the power or the condition lever?
Power lever.
Great video. I'm thinking of purchasing the ATR, currently only fly the Fenix. I've got the TCA Airbus officer pack edition, but what controller are you using?
I'm not keen on spending allot of money on new controllers, the Boeing edition pricing has increased
I use the same one.
are those long lines in the flight plan before desend normal that show on the video
Great video! As always. A quick note, I find putting the W/B in the fmc more effective and you can get exact! Keep up the great work!
A fantastic video, Massive thanks! Watched the whole thing. A perfect watch, just before I dive in myself. 👍
I just finished flying the ATR-72 (both 500 and 600 series). This is really neat. The ATR is a great aeroplane but very ungraceful on the ground. Unforgiving in a crosswind and crews have to really plan ahead when it comes to icing and mountain wave as this aeroplane just doesn’t have a whole lot of performance.
Yep it's one big slug. I'm just so used to flying the Pmdg 737 and I was wondering why it's so slow on climbout. I completely forgot its a turboprop 😂
O like si lot
Thanks / thanks / thanks . easier and faster - From Brazil
Where can I download it?
Marketplace. Hope you’ve figured it out and had/are having some fun, because I’m really struggling
Gav mate you are a diamond. Thanks so much for this
Thank you very much for the broadcast.
Excellent intro vid, I've made lots of notes, so now for a go myself!
So buggy, pretty disappointed
Love it how you guys get these tutorials up online so fast! Have had a good go at flying this amazing bird, have done alright! But I definitely need your pointers haha.
I thought you could set the ZFW and Fuel in the MCDU, not the weight and balance screen? When I enter the fuel in the MDCU the FOB changes.
No, the MCDU can however get the values from the sim weight/fuel settings: long press the key to left of ZFW and Fuel and it will auto populate.
Awesome video Gavin, Thanks for making it
Best line of the video at 52:03 ... "this has been a very brief, quick start guide"... Not sure an hour is 'brief', but it was well worth the hour.
'brief' compared to the type rating course 🤣👍
Inserting airways is bugged for me. It inserts the waypoints of the airway but it does it several times so to say.
For instance, if I follow an airway for 4 waypoints between entry and exit, it inserts those waypoints and then repeat them for pages and pages on the flightplan.
It is for me also noticed this yesterday. I just use directs for now till they fix it.
Does this to me must be a bug thought I was doing something wrong at first.
Thanks for this Gav, you are a legend, didnt think about the dual setup with the propeller power on right throttle on the TCA and the Power setting on the other, that has made life so much easier with this aircraft, which is certainly no default aircraft!
Great tutorial! Now you just need Binter livery :)
Im having trouble where my right propeller doesn't spin up.
The hold lock will be on and condition needs to be set to auto (I think)
Thanks Most helpful.
GG! ... still one of the best
@easyjetsimpilot does your setup run on max settings? Love your videos
Not max settings. There's a video on the channel of my current settings.
Some folks (me included) are encountering left drift, both on the deck and in the air. Probably something very simple but have you encountered this and, if so, have you managed to attribute it to anything specific? Cheers...
I believe this is the prop torque.
@@Easyjetsimpilot thanks. I'll look into it. Since it was happening both on the deck and in the air I figured it had to somehow be uneven engine power.
Have you managed to effectively remedy it or is it an unfixable bug at the moment? I don't suspect a bug as only a handful of people are experiencing it.
AmaIng video, thanks! Any idea why the propeller lock didn’t work at first? (For Hotel mode)
Condition levers were not in FO position.
@@Easyjetsimpilot thank you!
Gav as always, 100%
the engine starting procedure is totally wrong...in the real world you would have destroyed 2 engines
Can you enlighten us as to the correct way, as I am sure many people other than AVR pilots and maint guys do not know.
what did he do wrong? i'm no aviation expert
@@Danny94James you can't put the condition lever into feather before starting the engine. That will cause a hot start (the itt overheating) and the engine will end up in junk instead of flying.
The correct procedure is:
• For ITT
So engine failure is not simulated? I wonder what planes in msfs do simulate those basic things
@@chris22capt I think the problem, which he didn't illuminate but is seen from a lot of comments, is the way he setup his condition axis doesn't actually allow him to set SO
First
Mine was 28 urs was 27