??.. 4runner,,looks like a 300 series toyota.. garbage.. here in aus.. why you using ausie parts.??..when theres sooo many manufacturers over there.. arb are expensive over built. not needed.. ronny dahl, had arb lockers,, destroyed his axles, moly. nothing wrong with a detroit.. portal axles, not needed.. ifs, rubbish.. the nissan 62, break cv,s. all day...@@stellarbuilt
I just installed my set of portals and i wish i had known about these JD Fab arm Pivots. Currently waiting on my body mount relocation kit to come in so I can finally wheel this thing.
I love this ! Do you male them for ford expedition? I tried to look at the link and it was asking for my info before i could even check it out?? To see what all you make a kit for.😔 But awesome job 👍👍
I was curious if it would make more sense to just get new lower arms that move the tire forward? that kit that you cut everything off looks like a ton of work. Just curious?
True, custom arms can shift your wheel forward, but you don't have any adjustability, and more importantly in this case, you won't get the beefy mounting points the JD kit provides. The combination of these two is what makes the JD kit the optimal choice for the portals.
We love our solid axle swaps and do them all the time, but portals have their own set of benefits. One of the main ones being maximum ground clearance.
Can you Fit -40mm Wheels you Said -38mm , that 2 mm can be Offset rite 😬 Front and Rear Portals ⭕️⭕️⭕️⭕️ 4 What’s that Cost as Much as the New four Runner $ 52,000 😳👀
@@Baebon6259 I never said start with a pro, that would be silly if changing the suspension. An Off-Road or ORP would have been better because you're getting a rear locker and A-Trac (essentially a front traction device..ish).
We were REALLY shooting to upload the video today, but we are going to have to push it back until after the weekend. Doing alignment and buttoning things up today, and we want to wrap Part 2 up with some good eye candy and testing it out.
$22k is a touch nut to crack
Excited to see what the portals look like on.. ⚡️
It's going to be WILD!
??.. 4runner,,looks like a 300 series toyota.. garbage.. here in aus.. why you using ausie parts.??..when theres sooo many manufacturers over there.. arb are expensive over built. not needed.. ronny dahl, had arb lockers,, destroyed his axles, moly. nothing wrong with a detroit.. portal axles, not needed.. ifs, rubbish.. the nissan 62, break cv,s. all day...@@stellarbuilt
This was uploaded 13 days ago and I came to the channel to see pt2. This looks like it’s going to be a nice rig
We have part 2 90% done. Will post next week.
Brenan sure loves himself 😂😂😂
12:17 the second he said "you know who you look like"
I immediately knew who he was talking about 🤣🤣
Yesss hahaha! Glad you got a laugh out of it
I’m dreaming of portals for my ‘21 LC 200! That would be awesome.
shoot us an email when you're ready to start this conversation! sales@stellarbuilt.com
Wow that looks like some really nice stuff the quality looks so good awesome video and love the hole package 😊
I have portals on my 1961 VW Baja bug. Great mod for sure.
🔥, man I want the JD fab kit. Thats sweet.
It's a game changer
where is part 2? It’s been 3 wks
Yeah man it's been 3 weeks where is it
part 2 has been posted, you must have missed it brother
@stellarbuilt yeah I know I was just trying to be pushy like the other guy with lots of sarcasm.
Ridiculous amount of money spent. Blows my mind
I bought my 4runner new in 2010 and I’ve been waiting for something like this. Do you guys want to do this again?!? I’d really love do it.
Yes absolutely. This is what we do!
Shoot us an email sales@stellarbuilt.com
Following with great interest...Imagine my surprise at Shauno's Dirty 30 making cameo....
LOL 😂
Awesome!
Glad you think so, we agree!
Need a set for my subaru outback!
I just installed my set of portals and i wish i had known about these JD Fab arm Pivots. Currently waiting on my body mount relocation kit to come in so I can finally wheel this thing.
It's not too late! Give us a call, we just launched our holiday promo 916-701-5114
Hey, I recognise that dirty 30. Did Seano get you to do anything while you had it?
Lots of stress on independent suspension with portals. Imagine a panic stop, it will create a lot of leverage on the control arms.
Well i have independent suspension.....and i Dont have control arms , works just fine.
What about putting the first portals on the first gen four runner????!
Wooow than now .....i need them for pajero v20❤
Do you plan on doing a portal kit for the toyota hilux and Ford ranger? They tend to be the most popular 4wd platform in New Zealand.
Both applications are available
I love this ! Do you male them for ford expedition? I tried to look at the link and it was asking for my info before i could even check it out?? To see what all you make a kit for.😔
But awesome job 👍👍
Unfortunately nothing for expedition
The intros never fail to entertain!
Quad cab taco's wit longbed looks the best when lifted on 35s up tires....
Can Jd fabrication make the lower control arm kit for the 21 tundra?
Awesome, now I need portals for my SloRunnr. Also, today I learned the FHRITP guy - hoax! No kidding. 2014 will never be the same.
Oh wow, cool to see the Dirty 30 in there. I watch off-road vids from all over.
So were the mods + labor >= than the original 4runner?
Re-geared it while you're there.
My perfect rig would be a FJ80 on portals with 37’s and an LS or 2J swap.
LS garbage, have build problems.. 2j, not needed. a good 4.2tdi, is all you need.. without a computer.. like my mwm sprint. s/duty.. 700nm.. 4.2tdi..
I was curious if it would make more sense to just get new lower arms that move the tire forward? that kit that you cut everything off looks like a ton of work. Just curious?
True, custom arms can shift your wheel forward, but you don't have any adjustability, and more importantly in this case, you won't get the beefy mounting points the JD kit provides. The combination of these two is what makes the JD kit the optimal choice for the portals.
Do you get short axles to make up for how far out the Portals push the tires?
He got knocked down pretty quickly thinking his 4-runner was going to be as cool as an 80 series. 🤪😜😁
hahahaha he thought
Casual dirty 30 cameo
Why not a solid axle? You moved all the ifs in front which seems to be a huge job 🤔
We love our solid axle swaps and do them all the time, but portals have their own set of benefits. One of the main ones being maximum ground clearance.
@@stellarbuilt Can you get portals for solid axles?
вторую часть пожалуйста
When is part 2 coming out?
We are wrapping the build up this week so we will try to get part 2 out by the weekend. No promises, but that's our goal.
What is the total lift to clear the 37s?, and do they have kit for s GX470?
It’s about 4 inches of lift for the portals. This kit should work on a GX
Lmao Danny Mcbrides little brother getting some work done at Stellar
He can clear all speed bumps at the mall
I really want to do this. What is the cost of the complete build?
Portals are $20k
1st gen sequoia and I’ll take out a second mortgage!!! Lol
Can you Fit -40mm Wheels you Said -38mm , that 2 mm can be Offset rite 😬 Front and Rear Portals ⭕️⭕️⭕️⭕️ 4 What’s that Cost as Much as the New four Runner $ 52,000 😳👀
That was +38mm offset to suck the wheels back in since the portals push them out so much
What tires is that
I’ve heard it takes 100 hours for this “weld in plate”’ from a shop that recently did one. Huge expense.
I got an FJ Cruiser you guys can put a set on ... lol
Yes
Contact us sales@stellarbuilt.com
Can this be run on a KDSS T4R?
23 sequoia need portals so we can run 40s. our 37 are not big enough
Could you guys please ballpark the installation cost. Thanks
The kit runs about $20k
Please email sales@stellarbuilt.com
Wait was that the DIRTY 30?
Yessss
and a re-gear those 37 are gonna put a lot of stress on drive lines
The portals provide a 22% gear reduction to help turn them dirty sevens
ive seen it
$20,000!!!
So where is part 2 ??
We have part two dropping next week. The truck is 95% done
How much does it cost
Portals retail for 20k
wanna be first with portals and not go with 40's lol!
Dirty 30
How much for a set of Portals
Email us your vehicle year, make, model and we will get you a quote sales@stellarbuilt.com
All that work and money on an SR5 😱
why not? They saved on the "TRD PRO" and went with SR5 to actually make it outdo the "PRO"
@@Baebon6259 I never said start with a pro, that would be silly if changing the suspension. An Off-Road or ORP would have been better because you're getting a rear locker and A-Trac (essentially a front traction device..ish).
I suspect that they are going to add locking diffs to this setup.
@@AZBADBOYz SR5 would still be a better choice Atrac is standard on all 4wd model n for locker you could get it for $600-$1300
❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Надо ему чётки подарить!
Хаха можно😝
“Raptor lights” 🙄
Now swap engines because they are underpowered dogs
so much talkingggggggggggggggggggg
He lost me at SR5 premium….
Lol 1 million dollars later...... On a 4runner ......
When is pt 2 going up?
We were REALLY shooting to upload the video today, but we are going to have to push it back until after the weekend. Doing alignment and buttoning things up today, and we want to wrap Part 2 up with some good eye candy and testing it out.