Edward knocking it outta the park as always! Bro runs _hot,_ like 115% of normal human, and uses his super power for good! I have the Matek VTOL F405, and have 4.4.0 installed, (using those new ESC's you helped Mr Ryder get from BuddyRC last month, my alter ego). Flew amazing, especially like the little pitch up it does now when transitioning - I see you like it too! I don't think you mentioned it, but BlueJay ESC firmware and directional DShot changes the game, my dude; is it something HeeWing will officially support in the future, has the team validated it at all?
I assume the factor update settings are what Andy Piper sent them - as he mentioned it would ultimately be part of the official release. Have you checked that?
I tried using those settings on my new recently assembled bird. Its not saved as a param file, and it gave me a ton of "value is out of range" warnings. I didn't proceed, as Im new to ardupilot, so I didn't force it. It's so much different than BF and INAV. Much to learn!
I have a V2 with 4.3.5firmware, every time i land in VTOL, the right motor servo over-rotates and causes prop-strike on the wing, apart from that it flies fantastic, but at this rate I'll only be able to land that way a couple more times before its damged the wing too much. Do you know if I can adjust any parameters to stop the tilt servo/prop from clashing with the wing?
Nice video Edward - The T1 VTOL is a favourite of mine!
Edward knocking it outta the park as always!
Bro runs _hot,_ like 115% of normal human, and uses his super power for good!
I have the Matek VTOL F405, and have 4.4.0 installed, (using those new ESC's you helped Mr Ryder get from BuddyRC last month, my alter ego). Flew amazing, especially like the little pitch up it does now when transitioning - I see you like it too! I don't think you mentioned it, but BlueJay ESC firmware and directional DShot changes the game, my dude; is it something HeeWing will officially support in the future, has the team validated it at all?
Hi, very good transition, what flight mode do you use to make the transition?, after qloiter
I assume the factor update settings are what Andy Piper sent them - as he mentioned it would ultimately be part of the official release. Have you checked that?
I tried using those settings on my new recently assembled bird. Its not saved as a param file, and it gave me a ton of "value is out of range" warnings. I didn't proceed, as Im new to ardupilot, so I didn't force it. It's so much different than BF and INAV. Much to learn!
that im not sure
I have a V2 with 4.3.5firmware, every time i land in VTOL, the right motor servo over-rotates and causes prop-strike on the wing, apart from that it flies fantastic, but at this rate I'll only be able to land that way a couple more times before its damged the wing too much. Do you know if I can adjust any parameters to stop the tilt servo/prop from clashing with the wing?
You need to lower the servo end point on that tilt servo. It won't take much
Are you running bluejay fw on escs?
nope
I would like my T1 to take off like yours, mine turns around on takeoff without time to do the slightest thing!
Turns as in yaw?
@@EdwardRCAir No, he turns around, upside down.
So after flashing 4.4.0 put the default parameters From hewing website ??
it was already the default parameters from heewing before and after the flashing
no change of parameters required for flying the V4.4.0. it flies fine
DJI 03 setup with ELRS and custom osd do you know how
yeap i tried it. UART1 for ELRS and UART2 for DJI FPV. Pretty simple. then i i wonder where i placed those connectors after i have taken it out. arrrg
Did not work uart1. Had to use vtx power ,ground,Tx And uart2. Rx. And arm for low power mode not working
@@Dashone93 yes for power take from vtx or cam, not from Uart.
if your arm for low power mode not working, check your goggle setting.