Can’t stress enough how much I think you are one of, if not, the best RC reviewer out there my man! I love your driving segments and don’t get me started on your teardowns. TOP NOTCH!!
Not just mud, FLORIDA mud! Love the hole punching idea! What an awesome build & Bash!!! Best in the biz!! Thanks for posting and punishing!! V6 REAR TOWER, TOP PLATE, and ESC PLATE in the works!!!
Your channel is top level. The best content for every single vehicle you review and upgrade. The teardown, rebuild, and failure points help me decide what direction I wanna go for my next build. Keep up the great work.
A quick recommendation, when using loktite on a screw that goes into a closed hole (like on the centre diff), the loktite should go in the hole and not on the screw. If its on the screw, the air pressure would push the loktite up and off the threads, decreasing thread coverage.
Awesome rebuild Mr. Do. Thank you for sharing all your knowledge with the community. You and AJ from AJJAM studio are the best in fixing, reviewing and rebuilding rc vehicles.
@ Me too. I own 9 arrmas and not one is stock, I also really enjoy building fpv drones and a few electric skateboards under my belt. Fpv drones is a little more challenging due to the electronics software involved but so much fun. Electric skateboards are belt driven with dual 6374 outrunner motors, a 10S4P battery and also the electronics software involved. I really enjoy your channel so, just keep bringing the content and we'll keep watching. You need to put some affiliates on your channel and make some money cause i know making content is not easy, it takes a punch just to make one video. you're videos are awesome, straight up and into the depth right away, that's why we watch.
Man, I want one!!!! Can't wait till I get my hands on one. I love the whole ARRMA 6S line! Mostly, it's all interchangeable. So many different combinations you can play with in the whole 6s line it's a beautiful thing.
loving these early upgrade vids.. I'm definitely using this as a reference for doing the exp diff case upgrade, just want to point out a1 19:00 you can see that top shock nut is already missing
4:18 i use the Worx 4V Mini Electric Screwdriver, got it from aliexpress, i bought some MIP hex driver bits for it and its been a really good tool for a long time now
Nice, I would still put some double sided tape or a thin padding under the esc. It will help with vibrations/impacts and especially with little rocks that will get wedged underneath it.
Well to pre-punch the holes you do but you don't actually need to do that You can just punch the holes as you go. They don't really need to be in the exact right spot as long as they're within the ballpark you can figure out which ones go where. That being said if you're removing the old chassis you're probably doing it to put a new chassis on anyway at least most of the time
After the intimidating task of replacing my 3s Outcast shock tower and lower arm for the first time, I am awe struck at this video. The cardboard trick is awesome. Still amazing that everything went back the right way lol.
I'm not sure. It was first introduced in the original EXB 6s roller. I'd have to imagine some other company has made a similar design in the past in the RC hobby but I'm not aware of it.
@ Also I said it before I think, but I really like the ratio of technical, parts analysis, & post-mortem to driving this channel has. so many other channels ignore technical substance. My favorite part about RC ends up being about the build itself, how the designers thought about architecting the parts, and looking at what parts fail and wear under specific loads.
@@DoRC there is this thing called Slipper One-way Clutch. some 1/10 racing pro 4wd buggies come with those. i have no idea how it works but some say it is way better than center diff.
7:14 it actually is more functional. I have striped the threads on the stock plastic part , now the screws always back out and my esc won‘t hold on properly. I bet this won‘t hapen with those metall threads and if they back out than you can use loctite. Nice video as always!
I will say, for drivers, I use a Hyper Tough 1/4 inch compact impact for my projects. They make a brushed model for $35 ish dollars but I got the brushless version for a little more. Along with a 4 amp hour 12v battery. However I don't recommend it for 1/10 and smaller cars. It's super easy to strip things out and I've also snapped stub axles off tightening wheels way too tight. However, for larger 1/8+ projects. And it's speedy too, way faster than an electric screwdriver. You just gotta be careful lol If impacts aren't your style, Hyper Tough does make electric screwdrivers as well. By the way, hyper tough is a Walmart brand. So they're pretty easy to get ahold of. LOL
Yeah that's one of the things I really like about these drivers. With the modification I showed in a previous video you can use them all the way down to Grom screws.
@@DoRC yeah the impact I use would absolutely destroy those poor grom screws. So I use hand tools for those. So while that impact is fast and efficient, it's limited use. 😅
Everything from the V6 can go on the V5. The only things that would really require additional parts are the body and body mounts. You would also need to swap over the shock towers as the mounting holes are different and you would need the rear wing and rear wing mount too.
Loved watching that come together. Always learn something from your videos and your explanation of how the LSD works in these was great as i never really knew the difference.
Whew! Seeing all the Treal parts brings back good memories Covid times... I Treal'ed out a Son of a Digger and then sold it 😅 still kick myself anytime I see Treal because they aren't cheap but they ARE BULLET PROOF!
Awesome!! Just got my 4S Outcast, I love it. Still need to adjust punch settings, diff fluid and just get used to it. I want to do jumps but I am a little nervous, gonna just start small and try to learn air control. Thanks for the great videos!…
That's the way to do it. A lot of people immediately go for the biggest air they can and that's a mistake. It's fun but it's going to end up with something getting broken. Fine just a little jump or put a piece of plywood on a concrete block and jump that over and over until you can land on your wheels every single time. Then start working your way up. Getting the fundamentals down will really help you when you start doing big air
I use the Dewalt 8v inverted gyroscopic driver.. The same ones you see in Razz Shiffrins videos..about $80 i absolutely love it. The more you rotate the driver in either direction the more the RPM's increase..with max RPM's @400.
Unreal build mate beast mode !... I would love to see more raw footage on your bashing, little talk through and reactions from yourself when it comes to your upgrades, unboxing and reviews etc... I feel it would top your content off perfectly 🤞👍
Yeah I've had quite a few people recommend that. I actually took it out of my videos a while back because my retention showed people weren't really interested in it but maybe I'll try adding a little bit of it back in.
@DoRC yeah that would be great if you did mate 👌 I get that you've focused more on giving people good advise and ideas on builds etc which is ideal for the audience and newbies. But yeah that raw footage will gibe it that more entertainment feeling by your reactions etc. I know it can be a lot to add all that in to a video at the same time though.. I'm far from a newbie but got to say I've taking se pointers from you myself 👌
The bearing absolutely killed me😂😂😂 I did the exact same thing on other cars😂 I am currently looking for a stunt truck but to be honest, I dont have the balls to launch a 1/8 scale into the air😂 I drive my Kraton throttled to 80% throttle and I am still near a cardiac arrest when this thing is two feet off the ground😂 Really love your videos!
I’d highly recommend you check out hobbystar servos. They have a variety of budget options, but imo the best are the 4724 and 4717. If I’m not mistaken the board is the floating type and the lower gasket is a pain to reinstall so if you’re going to water test it, do that before disassembly. They’re very torquey and fast on 8.4v, and I also found them to be cool running, at least in the erevo which also has the best thermal design for servos.
Man great vid thanks for all the effort you put into these video’s and how much time you spend on them they are great and not many other channels out there do the kind of tear downs you do good job !
Regarding electric drivers: I love the DeWalt gyro drivers. They are expensive but I think it is worth it. I tried 3 different cheap drivers from Amazon and struggled to get one with good clutch settings. The TH-cam channel Project Farm has done reviews of electric drivers that might be a good source to find a new one to try.
😇Hello... To be honest... I have watched so many remote control bloggers' videos, and you are the one who introduced the modification in detail and explained it better...😅Although I can also modify it a little, but I am not as good at it as you...🥰 I am also very grateful for your teaching on how to modify it... Welcome to visit Malaysia...
I use and love the Bosch IXO VI. It has analog trigger, meaning the more you push it, the more RPMs it gives. Unfortunately there is already newer version, that does not have this feature. Only the v6 has it...
This is proof that upgrading isn’t necessarily a “flashy vs functional” situation…..especially if you’re not going to use it as an extremely hardcore basher….man that thing looks as impressive from an aesthetic point of view as it does in real time…..expensive no doubt…. Is it worth it? Depends on your wallet and needs….. as a newbie to this hobby i cant thank you enough for these informative and in-depth videos thank you Happy Holidays and a Happy New Year !
I have done an upgrade video on the forest outcast so it wasn't quite as extreme as this. Honestly there aren't really that many upgrade parts available for the 3/4s line. Since everything's kind of integrated and plastic it's a lot harder for manufacturers to make upgrades like they can on these platforms
Great video. Taking into account the runs you mostly run in dirt n sand. I’d love to see your take on after run clean up etc a modern video. Otherwise nice1.
I've tried a bunch different drivers DeWalt Makita there all great but tork settings are a must most drivers are to powerful for rc I've found that Bauer 4volt driver from harbor freight is perfect cheap doesn't have tork settings but I have never stripped anything with it cause the low tork just enough to tighten but not strip the plastic threads great breakdown of car great imfo from your channel
I've been using Walmart brand Hyper Tough cordless drill with no problems for 5years . I have 2 6s Notoriouses one blue ,one black . I want to convert to one of them to 8s . Great video 💯
You should do a video on the Worx WX242 driver. It’s only sold on Ali for about 30$. 0.15-5Nm clutch setting. It has the lightest clutch and nicest design I have ever seen.
Love my v.5. All stock. Just reinforced the shell and added lights. One of my favorite Arrmas. Mojave holds the top spot for me. Looking forward to getting a v.6 to pair it up with. Have to say, I wish they had kept the real steal paint job. Looks very good over time.
Very nice well done. A lot of nice detail and information on upgrades and how to’s. The run / bash session was very good. I just got a Milwaukee M12 model # 2401-22 variable hex screwdriver. That was a pile of left over parts nice add in there to see what all was changed for that 1lb. Difference. Thanks for sharing and Happy New Year! 🏁🏁⭐️🏁🏁
Yeah I think a lot of people overestimate how much extra weight upgrades add. Obviously if you're replacing a ton of plastic with a ton of aluminum it's going to add up but It's always important to remember that the weight you're adding is the weight of the new thing minus the weight of the old thing and often that's not really a big difference
Yea that shock nut was missing you can see it when you checked the weight, also the screw in the esc wire holder is missing also, good job though looks pretty good.
I own a Yipin "70kg" servo and it's fine, but for a similar price I also got an AGFRC 62 kg 12-16.8 volt direct power servo, which kicks ass. The Yipin did include an extra gear, it looks like the first gear that comes out of the motor, the one which has the least stress on it. I used the Yipin for a couple months, and it's hard to compare its power to the AGF, because I didn't tighten my servo saver (which was really loose) until after installing the AGF. But the AGF is definitely faster at 12v than the Yipin was at 7.4.
@Boogie_the_cat ya ive tried a bunch of them now. The ak47 and. the ak70 is in my xmaxx for over a year and its been flawless. The ak series come with 3 gears in the box.. ive used the 35kg ones in my 10th scale cars ive only roke one and it was from a really hard hit
Yes. It's not really the gear that should go in first it's the plates. It's a lot harder to make sure the plates are actually lined up when everything is on the spur gear and it's really easy to get one of the little plates caught between it and the case. They're thin enough that it's kind of hard to tell when it happens too. If you stuff everything in the case first you can be pretty sure that won't happen
Arrma has been doing a great job this year, can’t wait until 2025. The notorious does look really fun, is it true it feels like a Kraton and an Outcast baby?
The outcast and notorious are basically the same vehicle just with different bodies. It's kind of similar to Kraton but the much shorter wheelbase means it's a lot harder to keep the front tires on the ground. This can be good or bad depending on what you're looking for. It's harder to control but it's also more playful
The Arrma fasteners are actually pretty good quality. Good carbon steel has a higher tensile strength than stainless. Stainless can also gall in aluminum. The main advantage of stainless is that it won't rust but thats not really been a practical issue for me.
14:28 ehh RPM is softer so they get sloppy over time. Idk how people bust arms on these, I’ve had like 5 or 6 trucks that use these arms over the years and I’ve broken zero of them. I bought spares I’ve never touched.
Yeah they do get sloppy over time which is one of their disadvantages. I think whether or not you break arms is just down to how hard you bash. I've broken arms on every single 6s Arrma vehicle I've ever owned.
I haven't actually tried much of anything in the last few years. I got a bunch of different drivers before that but the no cry ones have been so good that I just bought more of those when I needed them.
@@DoRCthe big thing I like about the Amazon basics driver is the shape. It’s basically a screwdriver handle, so you a sung up a screw and finish the last bit by hand. Before it I had the dewalt gyro drive and it was a PITA. The difference between torque level 1 and 5 were almost indistinguishable. It was always a game of twisting the clutch up real high to break screws loose and then taking it low to reinstall. Wouldn’t recommend.
I love these build videos man and I have to say M2c makes an incredible premium product. I have a v4 notorious with v5 electronics and a lot of M2c upgrades it’s a blast never get tired of watching it flip. Merry Christmas and happy new year 🤘🤙
Can’t stress enough how much I think you are one of, if not, the best RC reviewer out there my man! I love your driving segments and don’t get me started on your teardowns. TOP NOTCH!!
Nailed it..👌
He’s like the Josh Bardwell of cars lol
@@seanconnolly2179 For real.
Question ?? Would it be possible to change the V5 to take the V6 body ??
Couldn't agree more! This guy is top tier 🫡
Not just mud, FLORIDA mud! Love the hole punching idea! What an awesome build & Bash!!! Best in the biz!! Thanks for posting and punishing!!
V6 REAR TOWER, TOP PLATE, and ESC PLATE in the works!!!
"ask me how I know."hahahaha GREAT WORK, Thank you!
Thanks for watching!
The factory mounting holes for MAX8 and warning is such a nice touch from ARRMA
I agree. That's the kind of stuff that they really don't have to do but it shows that they're paying attention to what their customers are doing.
Bucket list. This truck is a massive improvement and priced properly
Yeah even out of the box it's a very impressive vehicle. It's amazing how far things have come in the last 10 years
Recently discovered your channel and I am impressed.
Awesome welcome to the family! Plenty more to come :-)
Your channel is top level. The best content for every single vehicle you review and upgrade. The teardown, rebuild, and failure points help me decide what direction I wanna go for my next build. Keep up the great work.
A quick recommendation, when using loktite on a screw that goes into a closed hole (like on the centre diff), the loktite should go in the hole and not on the screw. If its on the screw, the air pressure would push the loktite up and off the threads, decreasing thread coverage.
Great tip!
Awesome rebuild Mr. Do. Thank you for sharing all your knowledge with the community. You and AJ from AJJAM studio are the best in fixing, reviewing and rebuilding rc vehicles.
I definitely enjoy the technical side of things!
@ Me too. I own 9 arrmas and not one is stock, I also really enjoy building fpv drones and a few electric skateboards under my belt. Fpv drones is a little more challenging due to the electronics software involved but so much fun. Electric skateboards are belt driven with dual 6374 outrunner motors, a 10S4P battery and also the electronics software involved. I really enjoy your channel so, just keep bringing the content and we'll keep watching. You need to put some affiliates on your channel and make some money cause i know making content is not easy, it takes a punch just to make one video. you're videos are awesome, straight up and into the depth right away, that's why we watch.
The cardboard layout for screws is good idea!
18:44 yup it was never installed. And proves how rigid and tight it performs. Great vid! 🍻
Yeah I saw that when I was editing :-) I figured that was the problem since I've literally never had one of those come off before.
I sure hope you are sharing all this with more than one apprentice. A class of 50 sounds about right. DO IT!
Right now it's a class of nearly 28,000 :-)
Man, I want one!!!! Can't wait till I get my hands on one. I love the whole ARRMA 6S line! Mostly, it's all interchangeable. So many different combinations you can play with in the whole 6s line it's a beautiful thing.
loving these early upgrade vids.. I'm definitely using this as a reference for doing the exp diff case upgrade, just want to point out a1 19:00 you can see that top shock nut is already missing
Yep. I saw that in editing. When I saw it was missing I figured that was the problem. I have never had one of those come off
4:18 i use the Worx 4V Mini Electric Screwdriver, got it from aliexpress, i bought some MIP hex driver bits for it and its been a really good tool for a long time now
Awesome I'll check it out!
really nice build and some beautiful parts used, i really like this one
Yeah it's a pretty sweet truck! Thanks for watching :-)
Nice, I would still put some double sided tape or a thin padding under the esc. It will help with vibrations/impacts and especially with little rocks that will get wedged underneath it.
Yeah it certainly doesn't hurt!
That cardboard trick is really good
Yes but you need a spare chassi!
Well to pre-punch the holes you do but you don't actually need to do that You can just punch the holes as you go. They don't really need to be in the exact right spot as long as they're within the ballpark you can figure out which ones go where. That being said if you're removing the old chassis you're probably doing it to put a new chassis on anyway at least most of the time
@@BASSstarlet eh - you can draw out a template from the bottom of your truck ..
@@jaceSHO That's clever!
@BASSstarlet indeed. And if you push a thick piece of carbord against it that will leave you with a great impression you can cut out
After the intimidating task of replacing my 3s Outcast shock tower and lower arm for the first time, I am awe struck at this video. The cardboard trick is awesome. Still amazing that everything went back the right way lol.
To be fair I've been doing this for over 20 years and I still didn't get everything right the first time :-)
The new notorious is sick, I can't believe how all these option parts only made it 1 pound heavier. So Sick!
That limited slip center diff design with the “clutch” is super cool. Has this ever been done in RC before?
I'm not sure. It was first introduced in the original EXB 6s roller. I'd have to imagine some other company has made a similar design in the past in the RC hobby but I'm not aware of it.
@ Also I said it before I think, but I really like the ratio of technical, parts analysis, & post-mortem to driving this channel has. so many other channels ignore technical substance. My favorite part about RC ends up being about the build itself, how the designers thought about architecting the parts, and looking at what parts fail and wear under specific loads.
@rustlerboi1052 It's my favorite part too!
@@DoRC there is this thing called Slipper One-way Clutch. some 1/10 racing pro 4wd buggies come with those. i have no idea how it works but some say it is way better than center diff.
Thanks so much for comparing the weighs! That solved my concerns over years😂
Excellent content again. Thanks for uploading over the holidays.
7:14 it actually is more functional. I have striped the threads on the stock plastic part , now the screws always back out and my esc won‘t hold on properly. I bet this won‘t hapen with those metall threads and if they back out than you can use loctite. Nice video as always!
Well yeah if the stock part is broken and upgrade would definitely be more functional :-)
DeWalt 8v gyroscopic screwdriver. Thanks for all of your awesome content!
Thanks for watching!
Excellent video, great truck too…
Yeah it's pretty fun!
Nice video ! You made a video of this notorious finally ! Thx again for all your advices !
Yep. It's one of my favorite trucks!
Great build!
Thanks :-)
Well done sir!
Thanks!
I will say, for drivers, I use a Hyper Tough 1/4 inch compact impact for my projects. They make a brushed model for $35 ish dollars but I got the brushless version for a little more. Along with a 4 amp hour 12v battery. However I don't recommend it for 1/10 and smaller cars. It's super easy to strip things out and I've also snapped stub axles off tightening wheels way too tight. However, for larger 1/8+ projects. And it's speedy too, way faster than an electric screwdriver. You just gotta be careful lol
If impacts aren't your style, Hyper Tough does make electric screwdrivers as well.
By the way, hyper tough is a Walmart brand. So they're pretty easy to get ahold of. LOL
Yeah that's one of the things I really like about these drivers. With the modification I showed in a previous video you can use them all the way down to Grom screws.
@@DoRC yeah the impact I use would absolutely destroy those poor grom screws. So I use hand tools for those. So while that impact is fast and efficient, it's limited use. 😅
I've been waiting for this one! I have the v5 and it would be great if some of the new v6 parts can be retro fit.
On with the show !
Everything from the V6 can go on the V5. The only things that would really require additional parts are the body and body mounts. You would also need to swap over the shock towers as the mounting holes are different and you would need the rear wing and rear wing mount too.
@ thanks for the info. First on the list for me is the EXB front bumper.
Loved watching that come together. Always learn something from your videos and your explanation of how the LSD works in these was great as i never really knew the difference.
Interestingly the principal behind the way these work is similar to the way some limited slip and lockers work in full size vehicles.
Dude this was a Notoriously good video! man those upgrades look darn sweet, Awesome truck my friend
Thanks!
Yeah! The new Noto !
Me so excited. Haven't seen it yet.
Hope you had a happy holiday.
It's pretty awesome! Yeah my Christmas was good. How was yours?
@@DoRCMy step dad got me a set of 3 MIP bits, so that's great 👍
Thanks for asking.
Whew! Seeing all the Treal parts brings back good memories Covid times... I Treal'ed out a Son of a Digger and then sold it 😅 still kick myself anytime I see Treal because they aren't cheap but they ARE BULLET PROOF!
Yeah unfortunately most of the good upgrades are not cheap.
Thank you for such a good show Kenni😎
17 after mods
Merry Christmas
What do you think now that you saw the actual final weight?
@@DoRC17
Translation :DD
Initial weight 6.7kg
Final weight 7.1kg
Mad upgrades, sir =)
Blasphemy! Freedom units or nothing :-)
@@DoRC I don't even.... how do you make sense of this stuff :D
9:10 yes, ive done that like a million times myself
Ugh. Too many times.
Love that Arrma went clipless
Awesome!! Just got my 4S Outcast, I love it. Still need to adjust punch settings, diff fluid and just get used to it. I want to do jumps but I am a little nervous, gonna just start small and try to learn air control. Thanks for the great videos!…
That's the way to do it. A lot of people immediately go for the biggest air they can and that's a mistake. It's fun but it's going to end up with something getting broken. Fine just a little jump or put a piece of plywood on a concrete block and jump that over and over until you can land on your wheels every single time. Then start working your way up. Getting the fundamentals down will really help you when you start doing big air
Great video!!! You're always on point with key information. Have a great new year!
Thanks you too!
Great vid!! I would go with a milwaukee M12 brushless 1/4 impact
What an absolute beast! Thanks for the great content again. Hope your holidays are treating you good!
Much, Much respect 2 u brother very informative videos ,interesting and educational thanks sharing 👍
Another good video from Do RC! 👌🙏
Thanks :-)
Merry Christmas
Merry Christmas and I use my d style Milwaukee 4 in 1 drill
I use the Dewalt 8v inverted gyroscopic driver.. The same ones you see in Razz Shiffrins videos..about $80 i absolutely love it. The more you rotate the driver in either direction the more the RPM's increase..with max RPM's @400.
It would be super cool if you worked with an RC company to provide insight from an engineering standpoint to create a super durable basher.
They've got my number :-)
Top quality channel, have really enjoyed watching/learning since I got into the hobby a few months ago 👍🏽
Welcome to the hobby and I'm glad you're enjoying!
Unreal build mate beast mode !... I would love to see more raw footage on your bashing, little talk through and reactions from yourself when it comes to your upgrades, unboxing and reviews etc... I feel it would top your content off perfectly 🤞👍
Yeah I've had quite a few people recommend that. I actually took it out of my videos a while back because my retention showed people weren't really interested in it but maybe I'll try adding a little bit of it back in.
@DoRC yeah that would be great if you did mate 👌 I get that you've focused more on giving people good advise and ideas on builds etc which is ideal for the audience and newbies. But yeah that raw footage will gibe it that more entertainment feeling by your reactions etc. I know it can be a lot to add all that in to a video at the same time though.. I'm far from a newbie but got to say I've taking se pointers from you myself 👌
The bearing absolutely killed me😂😂😂
I did the exact same thing on other cars😂
I am currently looking for a stunt truck but to be honest, I dont have the balls to launch a 1/8 scale into the air😂
I drive my Kraton throttled to 80% throttle and I am still near a cardiac arrest when this thing is two feet off the ground😂
Really love your videos!
The V2.5 4S outcast is another great choice. It's quite a bit smaller and lighter so it's a lot less intimidating
Its heavy, with M2C its heavy missile, dangerous one.
Yeah it's a little bit heavier with all the upgrades :-)
1 pound. That's not alot
I’d highly recommend you check out hobbystar servos. They have a variety of budget options, but imo the best are the 4724 and 4717. If I’m not mistaken the board is the floating type and the lower gasket is a pain to reinstall so if you’re going to water test it, do that before disassembly. They’re very torquey and fast on 8.4v, and I also found them to be cool running, at least in the erevo which also has the best thermal design for servos.
Man, I wish I’d have done that cardboard trick with the screws while I was transplanting my grom in its new chassis
It's definitely helpful especially if you're going to have it apart for a while
@ Now I know! And knowing is half the battle!
Man great vid thanks for all the effort you put into these video’s and how much time you spend on them they are great and not many other channels out there do the kind of tear downs you do good job !
Regarding electric drivers: I love the DeWalt gyro drivers. They are expensive but I think it is worth it. I tried 3 different cheap drivers from Amazon and struggled to get one with good clutch settings. The TH-cam channel Project Farm has done reviews of electric drivers that might be a good source to find a new one to try.
Fantastic truck indeed, dude! Awesome upgrading! 😃
I hope you had a fantastic Christmas!
Stay safe there with your family! 🖖😊
Thanks you too!
Merry Christmas!!!!111
"Arrma recomends 100k so I'm putting in 1 million" .....my man!
😇Hello... To be honest... I have watched so many remote control bloggers' videos, and you are the one who introduced the modification in detail and explained it better...😅Although I can also modify it a little, but I am not as good at it as you...🥰 I am also very grateful for your teaching on how to modify it... Welcome to visit Malaysia...
Traxxas warranty department is a joke. Anyways ur the man love ur videos
Interesting. Most people are very satisfied with Traxxas warranty.
Yes! I love my rocket fans. First time I tested one before install it basically hovered out of my hand like a helicopter.
Very informative video. Hell of a build. Must be nice to have the budget for that. Keep up the good work bro. 🤟👍🤙✌️🏎️🔥💨
To be fair I sell most cars after I'm done reviewing or making videos on them. I don't really have a big collection of them like some do.
@@DoRCI can appreciate that!
@@TRAVELER197 :)
I use and love the Bosch IXO VI. It has analog trigger, meaning the more you push it, the more RPMs it gives. Unfortunately there is already newer version, that does not have this feature. Only the v6 has it...
That cardboard, love it.
Great, fun video! Always enjoy your videos. I find them educational, inspiring and gives me ideas…🤔
Awesome glad you enjoyed :-)
The Amazon Basics by Skil is a beast. I think the Torque Channel and Project Farm reviewed it and said it was awesome. I really like it too😅
I'll check it out
This is proof that upgrading isn’t necessarily a “flashy vs functional” situation…..especially if you’re not going to use it as an extremely hardcore basher….man that thing looks as impressive from an aesthetic point of view as it does in real time…..expensive no doubt…. Is it worth it? Depends on your wallet and needs….. as a newbie to this hobby i cant thank you enough for these informative and in-depth videos thank you
Happy Holidays and a Happy New Year !
This a an awesome video dude excellent walk through on the upgrades 🔥🤙🏻sell me the chassis can you sign it too 😅
I probably won't be selling these parts as I find I usually end up needing 6s Arrma stuff all the time.
@DoRC very true 😁😁😁
I really enjoy this ❤
But can you do it for the 4s Outcast also?❤
I have done an upgrade video on the forest outcast so it wasn't quite as extreme as this. Honestly there aren't really that many upgrade parts available for the 3/4s line. Since everything's kind of integrated and plastic it's a lot harder for manufacturers to make upgrades like they can on these platforms
What a build
You should have got the new paint job one. But this one looks cool too
I thought about it but between the two I just preferred the black.
@ all good. You want something that you are proud of purchasing
Great video. Taking into account the runs you mostly run in dirt n sand. I’d love to see your take on after run clean up etc a modern video. Otherwise nice1.
I've tried a bunch different drivers DeWalt Makita there all great but tork settings are a must most drivers are to powerful for rc I've found that Bauer 4volt driver from harbor freight is perfect cheap doesn't have tork settings but I have never stripped anything with it cause the low tork just enough to tighten but not strip the plastic threads great breakdown of car great imfo from your channel
I've been using Walmart brand Hyper Tough cordless drill with no problems for 5years . I have 2 6s Notoriouses one blue ,one black . I want to convert to one of them to 8s . Great video 💯
I've never done 8S on a notorious but I did have one with a Max 6 system in it and it was pretty crazy.
@DoRC I wanna go Hobbywing or take the electronics / motor from the 8s outcast
Love my v4 with v5 diffs
The nuts on the shock absorbers, weren't they secure;
All but one :-) I looked back in the footage and I never actually put that one on.
Dewalt gyronscrewdriver is awesome
You should do a video on the Worx WX242 driver. It’s only sold on Ali for about 30$. 0.15-5Nm clutch setting. It has the lightest clutch and nicest design I have ever seen.
And you can also try the TOPK magnetic tip usb-c charging cable with it. It gets you Apple MagSafe like charging by usb-c for 3$. Also only on Ali.
Love my v.5. All stock. Just reinforced the shell and added lights. One of my favorite Arrmas. Mojave holds the top spot for me.
Looking forward to getting a v.6 to pair it up with. Have to say, I wish they had kept the real steal paint job. Looks very good over time.
Yeah it is a bummer they got rid of that.
I got a used DeWalt gyro driver with the twistable handle. Too expensive new really, but the 8v battery gives good rpm compared to my old one.
Yeah I've had one of those in the past. It was good though I wasn't super impressed with the speed or torque
Did you ever end up taking the horizon survey? I think alot of the changes in these v6 trucks are do to the feedback. It was a pretty in depth survey
I don't think I ever got invited to take it.
Very nice well done. A lot of nice detail and information on upgrades and how to’s. The run / bash session was very good. I just got a Milwaukee M12 model # 2401-22 variable hex screwdriver. That was a pile of left over parts nice add in there to see what all was changed for that 1lb. Difference. Thanks for sharing and Happy New Year! 🏁🏁⭐️🏁🏁
Yeah I think a lot of people overestimate how much extra weight upgrades add. Obviously if you're replacing a ton of plastic with a ton of aluminum it's going to add up but It's always important to remember that the weight you're adding is the weight of the new thing minus the weight of the old thing and often that's not really a big difference
@ Hi buddy. Yep, well said. You going to check out the Milwaukee M12? Appreciate your time and thoughts.
Yea that shock nut was missing you can see it when you checked the weight, also the screw in the esc wire holder is missing also, good job though looks pretty good.
Yeah I noticed that when I was editing. I was pretty sure that was the case since I've literally never lost one of those in the past.
My favorite RC Channel 💯
You give us a lot of info and break everything down so well. Thank you and HAPPY Holidays 🎅🎄❤️
Glad you enjoyed and have a happy new year!
Dude can u review yipin servos? They come with spare gears and they have some crazy cheap prices for what they rate the speed and power
I will check them out!
I own a Yipin "70kg" servo and it's fine, but for a similar price I also got an AGFRC 62 kg 12-16.8 volt direct power servo, which kicks ass.
The Yipin did include an extra gear, it looks like the first gear that comes out of the motor, the one which has the least stress on it.
I used the Yipin for a couple months, and it's hard to compare its power to the AGF, because I didn't tighten my servo saver (which was really loose) until after installing the AGF. But the AGF is definitely faster at 12v than the Yipin was at 7.4.
@Boogie_the_cat ya ive tried a bunch of them now. The ak47 and. the ak70 is in my xmaxx for over a year and its been flawless. The ak series come with 3 gears in the box.. ive used the 35kg ones in my 10th scale cars ive only roke one and it was from a really hard hit
I’m guessing it’ll weight 16 pounds
Edit: 9:50 why should we put the gear inside first and then put the spur on? Is this a limited slip thing?
Yes. It's not really the gear that should go in first it's the plates. It's a lot harder to make sure the plates are actually lined up when everything is on the spur gear and it's really easy to get one of the little plates caught between it and the case. They're thin enough that it's kind of hard to tell when it happens too. If you stuff everything in the case first you can be pretty sure that won't happen
Arrma has been doing a great job this year, can’t wait until 2025. The notorious does look really fun, is it true it feels like a Kraton and an Outcast baby?
The outcast and notorious are basically the same vehicle just with different bodies. It's kind of similar to Kraton but the much shorter wheelbase means it's a lot harder to keep the front tires on the ground. This can be good or bad depending on what you're looking for. It's harder to control but it's also more playful
@ It deff looks wild, like a Kagama 6S. I think I may go with some time tamer like the New Kraton. My Kagama is a hand full.
Monster ❤
The one thing that I noticed that you missed was replacing all the stock fasteners that are cheap Chinese pot metal to Upgraded Stainless Steel.
The Arrma fasteners are actually pretty good quality. Good carbon steel has a higher tensile strength than stainless. Stainless can also gall in aluminum. The main advantage of stainless is that it won't rust but thats not really been a practical issue for me.
14:28 ehh RPM is softer so they get sloppy over time. Idk how people bust arms on these, I’ve had like 5 or 6 trucks that use these arms over the years and I’ve broken zero of them. I bought spares I’ve never touched.
Yeah they do get sloppy over time which is one of their disadvantages. I think whether or not you break arms is just down to how hard you bash. I've broken arms on every single 6s Arrma vehicle I've ever owned.
How do you know K? 😂 Merry Christmas 🎄
Not sure what you mean? Thanks you too!
@ oh, you said how do you know longer screws can destroy an ESC 😂
@gillyboyNY ah. Brand new Max6 a few years ago. Killed it with a screw.
Hope you all had a merry Christmas.
Thanks you too!
You may have mentioned it but I may have missed it. What chassis is that you are using?
M2c
Did you try the Amazon basics driver yet? I also use a hypertough 12v brushless drill for longer screws
I haven't actually tried much of anything in the last few years. I got a bunch of different drivers before that but the no cry ones have been so good that I just bought more of those when I needed them.
@@DoRCthe big thing I like about the Amazon basics driver is the shape. It’s basically a screwdriver handle, so you a sung up a screw and finish the last bit by hand. Before it I had the dewalt gyro drive and it was a PITA. The difference between torque level 1 and 5 were almost indistinguishable. It was always a game of twisting the clutch up real high to break screws loose and then taking it low to reinstall. Wouldn’t recommend.
Hyper tough electric screwdriver at ole WALMART for $12.97. Its what i use. It works
I will check one out!
what gets bent when you crash and do cartwheels till it stops.? the rim axle hole, the cv axle or the hex hub
Are you talking about a specific incident? Nothing broke or got bent in the video.
@@DoRC all mine do it. just want to fix it without replacing everything. id like to prevent it.
Oh I don't really typically have any of those fail. It's usually the arm that breaks for me when something breaks.
@@DoRC not saying anything is broken. watch your front and rear wheels and travel in a straight line. You might see it.
@@DoRC would be a nice topic to cover. it happens
0:26 never run off batteries? naaaahhh I run mine off potatos
I love these build videos man and I have to say M2c makes an incredible premium product. I have a v4 notorious with v5 electronics and a lot of M2c upgrades it’s a blast never get tired of watching it flip. Merry Christmas and happy new year 🤘🤙