Twin turbo LS Gbody Cutlass first start up video
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- I finally got my twin turbo cutlass running. Still gotta get the bugs worked out. Afr is off a bit and still dealing with a fuel leak but it’s running I have a fan wired in and now have Holley controlling the pump for now aswell. Soon I will clean up the wiring and better place things.
You did a really good job dude for your first time😊
I appreciate that alot! Everything started to fall into place once I really dug into it.. the most important thing I learned was not to be so impulsive purchasing certain parts.. let’s just say I spent a lot of unnecessary money that could have went to more important parts lol
Congrats bro it’s been a long time coming. You been busting ya ass (pause) to get that car up and running and all ya hard work is paying off.
True indeed bro!! Each day off at work! Over the hump finally
Like it buddy. I love the stuff Matt at sloppy puts out it helped me with my build on my channel keep post love watching first start ups.
Yup, alotta great info from them.. thank you 💪🏼
Goodluck with traction. Ive got a twin gt35s on a L33 LS. 10Lbs of boost. Its in my 79 c10 short bed. Ive got M/T 10 wide slicks. Full locker with 3.08 gears. I cant get traction. Smoke the tires even at a half throttle.
Damn. I can only imagine it. I bet it’s a party to drive. I’m lookin into getting the drive shade fabbed up real soon to make my first drives
@@nitomeanboyGBODY im now at 14Lb of boost and tuned. This truck is wild!
Yes sirr yes sirr I have a 84 man your cutlass is more motivation for me thanks for posting
Thank you.. gonna have some updated videos coming really soon. Just waiting on parts 🙏🏼
@@nitomeanboyGBODY man I’m tuned in for this build I’m going to start ordering me a turbo but I’m going single turbo
Preshaaa 🔥🔥🔥 Congratulations on the first start fam 👍🏾
Thank you fam. You know first hand the feeling.. can’t describe it. I gotta catch up to you. You got that monte goin!
@@nitomeanboyGBODY gotta get it DYNO it’s running Rich since I’ve upgraded the fuel rails
@@MRRANDOM1 I gotcha.. I’ve gotta work some bugs out too.. gotta add more piping to my hot side for better wideband reading and get a drive shaft fabbed up so I can start to take small drives and iron everything out
@@nitomeanboyGBODY I shared your video to my community hopefully It gains you some subscribers, you deserve it!! Keep up the great work! 💯👊🏾🔥🙏🏾
@@MRRANDOM1 thanks bro. I appreciate it. I’m gonna do the same. I don’t have much it u have the knowledge that others may need. One hand wash the other
tapped in nice cutlass i have an 86
Thank you. Gettin it right as much as I can mechanically before I work on the cosmetics. She a lil rough but solid
Great build
Thank you. Time for drive shaft and shifter install 🙌🏼
Badass build 😎 do the plug wires interfere with the headers?
I appreciate it. And no not at all.. once I spaced the coil bracket up it was perfect.. not one issue
reverse mounted headers ftw!!
Yessir 🙌🏼💪🏼
Subbed. Got a cutlass ls swap Holley terminator x on my channel i been building
Nice nice. Ima check out ur channel. A lil info from everyone goes a long way
Nice build bro! But where are the wastegates?
Gotta watch my other videos bro lol. They’re there tho
🔥🔥 going to be following. Need some ideas for my g body
No doubt. I appreciate u 🙏🏼
Get it in bro🙂👍
Thank you. Step by step!
Great job man! How is the header clearance from the steering shaft?
Thank you. The clearance was perfect. Even when I had the stock gbody shaft in it
@@nitomeanboyGBODY thanks!
Good job bro 😎
Thank you 🙌🏼💪🏼
Whats all thats needed from the donor truck? Nice build bro. Im building an el camino
Thank you.. and get what u can.. motor wise try and get from intake to oil pan complete as possible… and trans if u can… nothing else is salvageable really… to save urself time and energy I’d suggest saving a few bucks for the holley terminator harness and ecu… you’d pretty much be atleast 85ish % ready to go other than ur own labor and other small things of ur choice
@@nitomeanboyGBODY sweet . Im planning on camming and turboing mine. I got a tahoe donor truck. Seems like i just need the motor and trans so i can scrap the rest . Thanks a bunch brother
@@MansoyHumilde777 yup.. absolutely.. that’s about all u need.. and I’d say just be safe and invest in some quality injectors and fuel pump and u should be golden
Yes Sir
💪🏼🏁
Did you select the right map sensor when you did you base tune/setup? I was having the same issue with mine
Yes I believe so.. I’m running the stock gm map that came with the stock manifold and what not. Which I believe to be the GM 1 bar. But I also must add more piping to the hot side. I’m sure a bit of the ambient air is messing with the wideband a little
@@nitomeanboyGBODY I have a video on my page about it. I think with running turbos you want a 2 or 3 bar if your shooting for higher power/twin turbo. I don't think the stock gm one is an option on the holley terminator.
@@Dashsgarage I’m gonna check it out. And yes I have a 3 bar and harness adapter for it tucked away. I’m just buttoning everything else up before I swap it out and start making boost
Think it's in my elco playlist. Finally figured out my air fuel ratio problem or something like that. th-cam.com/video/DVKQQil93WQ/w-d-xo.html
@@nitomeanboyGBODY sounds good. Let me know if it helps. I'll stay tuned on your channel, i plan on a single turbo ls in my monte soon.
Are those out of the box headers? What brand?
They’re from eBay.. got em from a seller on marketplace that went a different route
Hell yeah bro what kit is that?
Believe it or not I pieced it together from different vendors from ebay and amazon and some facebook market sellers
@@nitomeanboyGBODY oh okay nice man that’s what’s up, I wanna do the same with my 79 I’m just worried ill get headers too long and the turbos will be too close to my radiator. What headers you got?
@@GBodyJosh it’s an eBay up and forward turbo header.. ppl who wanna bring em back a bit normally just cut it down about a couple inches or so from the flange and re weld it on. It’s not an issue. I cut and re welded the passenger side header down a bit. Could have cut atleast another inch but it’s fine for now
@@nitomeanboyGBODY okokok. I was gonna buy a g body turbo kit but might just get a tig welder and start goin ham. I’m a welder/fabricator so it’s not a problem to do it I was just hoping to save time and effort
@@GBodyJosh well hell if that’s the case you’re more than able to get it done with ease 💪🏼 once u start the motivation will take over
What lower radiator hose are u using if u have part number thanks
It’s in one of the previous videos before this one. I can’t remember exactly which one.. I’ll try n get it for u
Where did you get the turbo kit?
Mainly custom… the intercooler, elbows and forward headers came from eBay. Everything else was fabricated
Not trying to nitpick but your downpipe is going to melt your front tires!
Lol it was only there temporarily lol and almost loose.. they are now re routed. I’ll have an updated video real soon. I didn’t run the car long it was only at idle
Are you running this with the original ECU?
No I have it on a terminator x max
@@nitomeanboyGBODY oh okay, I’m trying to learn these engines so I wasn’t aware the terminator could control the engine. I need to look into it. Thanks man 👍🏽
@@Fahrenheit_Motorsports no problem at all.. yes the Holley has a very wide range of controllability over the stock ecu.
Where did you get your turbo kit
I put it together myself.. I don’t really like to do kits. But I’ve heard good things about on3 kits. And vs racing has decent options too
What headers do you have here? thanks
They’re just basic eBay up and forwards. They’re not bad, just keep coil and wire location in mind. I have to move my upward about an inch to make sure they don’t get burnt
@@nitomeanboyGBODY Great..thanks for response. Trying to source something the might fit in a turbo LS3 Miata swap.
@@Dodgevair I understand. I can tell u that that they are pretty tight to the engine which is good for space.. only thing I can think of being even tighter and makes sense is stock truck manifolds flipped
@@nitomeanboyGBODY Yes, I've thinking about those as well.
What type of ecu? Why do you have that flex fuel senor?
Holley terminator… and the flex sensor is for the computer to use and reference it to compensate timing as needed for ethanol content in the fuel.. very important when running e85 to any extent
@@nitomeanboyGBODY how much are they, and where to get it. Do you have a part no.?
@@ericperry4934 can’t remember the part number but it’s a gm sensor. I payed maybe 50 bucks if I remember correctly. From rock auto.. but u can get em just about anywhere
What headers
Good ole ebay
This shit a bucket
That’s a good one lol 👍🏼