@@SupDoggyTVthat’s what I did. 2000 camaro with 6 speed for 3200 running and driving and swapped everything over but I used holley efi harness. Kept the 10 bolt in the elco and used a rear brake conversion kit to swap the discs over.
Right or if you get your engine and transmission somewhere else and you have a pull a part in your area you can at the very least pull all the supporting stuff like wiring harness ECM fuse block etc for very cheap
Ive been looking into an ls swap for my *drum roll* e30. Seeing everyone say 10k + to do it "right" Im thinking theres gotta be a cheaper way. People like you give me hope.
I'm doing the same, all in, I imagine it will cost 40K. This dude doesn't have to worry about $1,500 headers and weight distribution. In our case an aluminum block like an LS3 and a T56 trans is key- these are expensive. We also need fabricated swap components like drive shafts, mounts, steering, muffler systems and a way to control everything. His projects all came with V8's from the factory and the entire emphasis is on budget, with virtually none on performance. Would you drop a 200 HP LS1 truck motor made of iron in an E30? You still need 4-5K worth of swap components to do the job at all, much less "right". Remember, E30's have become very valuable, if you want to get your investment back one day it must be done well. A 600hp/2,600 lb E30 with 50/50 weight balance will be in demand perpetually because it does it's job very well. Anyone will say it's worth the 25-40K you put in it. For comparison, I have a $60K AMG that is not half as capable. It's not a project you just do to "make it run", because the end result is a specific tool to be used by a specialist. Does that make sense?
@@ChrisRogersTheAngryChef Well said, I do think a lot of the difference in LS swaps come from what are you making, doing it for a V8 novelty like a lot of the JDM swaps youd want nothing under a corvette engine, but if you just want to get an old rig runnging without a lot of cash or carb purism than a truck LS is what you want
I’ve got a ranger 4x4 I’m doing a ls swap in, it makes me laugh how much I’ve spent researching, and here’s your video with all the information I had to learn the hard way
With soo many companies making harnesses, brackets, adapters, and many other things now, its cheaper than it's ever been. It will get cheaper and cheaper over time
Hey great video! Quick tip. Early 90s to about 2003 volvo cooling fans come either relays for about $25! They last forever and are low sound! Next check out the Dorman fbody ls intake. It is cheaper than a gm intake and will out flow the z06 intake!
If you know how to use tools, follow directions, are interested in the process, and are patient, anyone IMO can do an LS swap. TH-cam is your best friend and you can find everything there and on the internet. I bought a wrecked Escalade with a 6.0 from Copart (which was the biggest expense by far, but it was running so I went with it), did my own engine rebuild with a mild stage II cam, had my tranny billet built, and bought build parts as necessary. Like he said, go Gen III. If I had to guess, I'm probably around $7k in, but my truck powertrain is practically brand new. I used probably 80-90% of the donor (engine/tranny/ecu/intake manifold/drive shaft shortened). The most expensive parts that weren't off the donor were the radiator, harness, and fuel tank. I also went with aftermarket gauges and put 3.73 gears in as well. I work and have 3 kids, so it took me about 10 months to finish. I'd put my build up against any garage because I'm an OCD perfectionist.
I rebuild transmissions for a living and you should definitely run it to the radiator. Adding an aftermarket cooler after the radiator is great but you want that stock cooler
What's the benefit, it sounds like the external is keeping the trans nice n cool as it is why add the complexity? Granted its not that difficult to add it to the mix but I'm trying to understand your logic. Thanks
Thanks for sharing your knowledge on doing these swaps. I am getting ready to swap and restore my fathers Chevy 150 sedan and although i have a general idea of how to do it, your videos have helped me simplify a plan to do it right and stay basic. I'll have to tackled the rear end since it shot but thats going to take some time and research. I'm super happy i found your channel.
I've always run my automatic cars with a separate trans cooler. I heard years ago if your motor runs hot and trans is hooked up to radiator it will make trans run hot too.
Trans coolers save transmissions! Especially the weak POS 4L60Es but I put them on everything I tow with. They're cheap insurance and it's satisfying never having your transmission get hot. Hydraulic fluid does not benefit from high temperatures (the reason jet fighters use fuel/hydraulic heat exchangers). Trans coolers are like a sore dick, ya can't beat it!
I can’t wait to swap my 2011 Cadillac CTS coupe with a 5.7 or 6.0 I want to keep it like OEM on the outside but , under the hood would be a beast of an engine
I have a question the motor mounts plates you showed on this video with all the holes in it.???? Are they adjustable motor mount plates so you can push the engine back more further or you can move the engine further forward for different combos and setups????
Agreed, if YOU do it yourself and are on a budget, you can do them this cheap. But I get people asking me for quotes and expecting me to quote them $4500 for a swap, parts and labor! lol
Appreciate you giving us an update, most of the stuff I see is pretty dated now, I like you comment about trying to use Amazon first then E bay due to the ease of returning, thanks!
Appreciate the video and info. You started with a surplus of $50, though. Sold an engine and trans for $900, then paid $850 for the LS, which left you $50 in surplus.
If I had a way to ship engines out your way reasonably I would do it. I'm up in the Northeast and the yards are polluted with rusted/crashed trucks and vans. The past 3 engines I bought off of marketplace or local cuz they were not much more then junkyards and I didn't have to pull them.
I'm in MASS I'm looking to do an ls swap into a 00-02 4wd S10 pickup. Id be on the tightest budget possible and be doing as much if the work myself which I'm hoping would be about 75%. I have a 00 crown Vic w. A 4.6 w. Exactly 100k and chance ran fine when I parked it 2 yrs ago and the transmission only has a little over 10k on it (newly replaced) so I'm considering pulling that motor and trans and either selling it to buy the LS or possibly just building it and saving it for another ford. The car has some from the rmv in it so I can't move it or start it or drive the car only reason it's sitting. Mass rmv is the worst. Sorry for the long response. Alot going on lol
Also no one considers changing platforms. Exaple if your putting one in a 4cyl car youll need a a lot more stuff like radiator, driveshaft, axles, mounts, linkage, and plumming
Awesome information. I'm doing a 5.3 swap into a 1995 Astro. I should be able to do it for about $1,000.00. I got a complete running 2004 Suburban for the donor for FREE. I'm going to use the stock ECU and fuse/relay box. I'm backing it with an NV4500 so I'm going to have to buy a flywheel, pressure plate and clutch though.
Terrific video!!!! I’m just getting my 92 Camaro LS 6 liter with a Aisin 5 speed from a Chev Colorado and Fabbot conversion I have done a complete ground up build by myself on a budget Thank you for your video
Dude, is that a '72 Chevy Vega GT wagon I see? Cobbled together may not be the 'right way', but it sure as hell can be considered a 'proper way' if it all works together w/out major flaws :) Love it!
I like the alternator on the passenger side. Will the wire reach if I switch it gyro the driver side? Or do I have to get a wire harness with a longer wire
I would like to do that in my 66 impala SS. Looks intimidating. wouldn't even know where to start. Motor mounts and transmission mounts are different. What about the drive shaft? Very reliable option.
Can you go over what you needed for you harness for the 4l60 n 4.8,what was needed for the ls 1 intake fuel pump set up ect,what you all did to make it work
Have a question! I’m more a cheapy guy, do you think it would be a simple swap to install a 3800 series 3 motor into a Monte Carlo SS 80’s model? I like the fact that they’re the most reliable engines and I want a cruiser!
I have a 64 Skylark I was going to put a Nailhead in it.....but I have a 2000 Yukon XL I stopped driving but it still runs....after this....I'll pull it...freshen it up & put it in the Skylark.
Hates the word do it right, proceeds to show you a swap done right lol. That’s a clean set up. You can do it for cheap if you got the skills. That harness is indicative of your work. Looks sharp.
Couple quick questions, If I found a donor 4wd truck, could I just remove the transfer case and use the motor/trans? Alot of old rusty trucks here in the Midwest but the drivetrains still going strong. Other question, if I wanted cruise control, how could I swap the steering column or use an 80's style steering column?
Hey i love the content! I want to start by saying I just picked up my first project. I am not the most mechanically inclined person but this has given me a ton of confidence to tackle a project like this. Would you mind sharing how you source these engines? Simple google search usually results in prices that seem drastically higher than what your referencing. Keep up the awesome videos!
Can you tag which wiring harness from Amazon you have been using? Also why did you need a new accessory drive bracket and power steering pump? Clearance?
Only thing I don't like about the Amazon/Ebay harness is they are not txl/gxl wire, they are pvc sheathed and will melt. In a pinch or extremely tight budget they will work. For me I'd skimp somewhere else.
Mane im only in about 550. Not including the trailer I had to rent to tow the vehicle. But a complete 2000 silverado, just a broken tie rod and cut thru tank. Me and my dad went half cuz he needed the trans for his 2006, and other interior stuff.
Good video on getting me started on my 86 Chevy Silverado that was my fathers I’ve been holding onto for 20 years and finally I’m on my way with a swap! Thx but I have a 6.0 2012 L96! Might get a little bit more pricey
Besides trying to do it yourself, I bought a 5.3 swapped iroc z, it drives but nothing else works, wiring and gauge wise, where do I get all the knowledge to know how to fix a rear diff or suspension or fix a rusty body, I'm looking to start building a car from the frame up next but I've had 0 car building experience
I am doing an ls2 s2000 swap, what has your experience been with which harness might work with ls2, they mostly say ls1, and have you figured out which headers or manifolds are closest to the block. Clearance problem with clearance on honda swaps. Good and much needed video. Thanks
I have a 280zx I’m going to do a v8 swap as I have a great 350 SBC. I was going that route becaus everyone said an LS swap would cost me 10-12k. But you give me hope. I’m going to sell the L28 engine that’s in the 280zx.
Awesome job I'm not a LS guy but I would like to do a s10 swap LS . What part of Texas are you in? I'm getting ready to put my big block in my 88 monte carlo SS in 2 weeks. Thanks for the video
My opinion is ls are cheap if you can still source them in the same manner. Junkyards are a wast of time now days. You just need to be creative. I got a $2000 doner denali escalade $2500 for internals $3500 t56, microsquirt ecm and harness $400, $300 radiator, $600 driveshaft and then $300 for misc. So i did my whole swap for about $8,000 total. Less then a new ls3. And i got a brandnew tranny and basically motor. I consider that really cheap for a fresh 600hp.
I'm getting a 5.3 out of a 2000 4x4 chevy truck. I wanna put it in a box chevy impala. Do I need to get the harness setup from the truck to go with the motor?
The cheapest engine you can do in California from pick n pull is less then 100$ on 50% off day. Will be more if you keep the accessories. Only issue is your gonna be fighting over spots
Would u use the sending unit in a 67 camaro for the return gas.line an then weld a bung fitting in the bottom Of tank for new gas line with pump an filters the evil energy gas pump I have sez it should be lower then gas tank
MY LS SWAP WAS NOT CHEAP...! i had a running 305 in my 85 cutlass supreme and thought i would do a super cheap Ls swap for 450 $ running 5.3 Ls. the engine itself was cheap but all the modding and brackets and conversion hardware ended up costing several thousand bucks. Maybe couldve done it cheaper but not in middle of covid and it wouldve taken a year instead of 2 months. Looking back in hindsight not sure i would do the LS swap again, depending on price of a basic 300 Hp crate engine , it definitely wouldve been easier to stick with a SBC and i may still have AC which wouldnt easily fit with Ls engine.
Yeah all these people on TH-cam saying 5-10k on parts for an old motor is cheap.. like what? You could have just got a new crate motor that's more reliable. all these foreign third parties making replacements also ads to the price. Can't get cheap factory parts when the factory doesn't care anymore. 😂
Same. Did mine during Covid. 85 Monte. Paid 600 for engine and trans. Everything else was about 4k plus the 1500 for labor. I didn’t do it. So it was a little over 6grand. Out the door. Took a while. Almost a year due to Covid couldn’t get parts unfortunately. And it wasn’t even a “LS”it was out of a Tahoe. But for another 300plus I can get the ls intake which looks way better than the truck intake manifold.
I'm new I have many Qs . One is can I use a 6.0 from a Silverado HYBRID in a regular gas 1500 Silverado? Main concern is the starter, flywheel, and cpu
Just bought a 130.000 mile LQ9 think was an 05 Escalade $1100.00 everything included down to the pedal. Also a Gen 3 LQ4 with everything $1000.00 think that was 180.000 mile.. Idk thought that was kinda much but i grabbed while the getting was good.. They pulled and shrink wrapped for me so easy load up
Serious question... I have a 2015 Altima and I have a 2006 gmc with a 5.3 How much would you charge for labor for the swap? Also do you rebuild engines also? If not id get that done then have you do the rest. Literally being very serious.
If the ls motor will fit without having to change intake, exhaust manifolds or the accessories, it can probabky be done cheap without too many problems. If the ls motor won't fit as complete, doing a cheap ls swap is a real pain and takes some real creativity and effort.
your channel should have 50k subs.. Straight talk no BS and your not pushing "affiliate" sales like all the other guys.
I appreciate it. I try to be more educational than entertaining.
would love to hear what you think of my channel dude, been putting a lot of effort into it!
@@krustyclassicsgaragewhat type of harness u use
A good option is to get a complete donor vehicle. That way you get a complete motor, transmission, wiring harness, fuse block and PCM all together.
Hi, I want to use a 98-2002 Camaro as a donor. Including disk brakes. Any advice is helpful. 87 Cutlass
@Astro Not a donor Camaro might get expensive, I would suggest finding a rear ended tahoe,the 4.8 and 5.3 are great engines
@@SupDoggyTVthat’s what I did. 2000 camaro with 6 speed for 3200 running and driving and swapped everything over but I used holley efi harness. Kept the 10 bolt in the elco and used a rear brake conversion kit to swap the discs over.
Right or if you get your engine and transmission somewhere else and you have a pull a part in your area you can at the very least pull all the supporting stuff like wiring harness ECM fuse block etc for very cheap
I got an fbody in pa, fresh rebuilt trans 7k complete. Runs and drives.
Ive been looking into an ls swap for my *drum roll* e30. Seeing everyone say 10k + to do it "right"
Im thinking theres gotta be a cheaper way. People like you give me hope.
turbo 4.8
U guys are using the cheapest of the l.s I'm only using 6.0
I'm doing the same, all in, I imagine it will cost 40K. This dude doesn't have to worry about $1,500 headers and weight distribution. In our case an aluminum block like an LS3 and a T56 trans is key- these are expensive. We also need fabricated swap components like drive shafts, mounts, steering, muffler systems and a way to control everything. His projects all came with V8's from the factory and the entire emphasis is on budget, with virtually none on performance. Would you drop a 200 HP LS1 truck motor made of iron in an E30? You still need 4-5K worth of swap components to do the job at all, much less "right". Remember, E30's have become very valuable, if you want to get your investment back one day it must be done well. A 600hp/2,600 lb E30 with 50/50 weight balance will be in demand perpetually because it does it's job very well. Anyone will say it's worth the 25-40K you put in it. For comparison, I have a $60K AMG that is not half as capable. It's not a project you just do to "make it run", because the end result is a specific tool to be used by a specialist. Does that make sense?
@@ChrisRogersTheAngryChef Well said, I do think a lot of the difference in LS swaps come from what are you making, doing it for a V8 novelty like a lot of the JDM swaps youd want nothing under a corvette engine, but if you just want to get an old rig runnging without a lot of cash or carb purism than a truck LS is what you want
I paid $4000 on a L92 6.2 ltr with computer and harness it's from a 2007 Yukon Denali engine.
Trying to put it into a 86 Oldsmobile Cutlass supreme.
I hate your LS swap into your cuda but after introspective thought I realize this is hot rodding in a pure form. Hate it but love it.
I’ve got a ranger 4x4 I’m doing a ls swap in, it makes me laugh how much I’ve spent researching, and here’s your video with all the information I had to learn the hard way
Thats the best way to learn though. Thanks for watching.
i have a 6.0 to put in my 71 C10 and a 5.3 to put in my 50 model 5 window. thanks for the budget options!
With soo many companies making harnesses, brackets, adapters, and many other things now, its cheaper than it's ever been. It will get cheaper and cheaper over time
Hey great video! Quick tip. Early 90s to about 2003 volvo cooling fans come either relays for about $25! They last forever and are low sound! Next check out the Dorman fbody ls intake. It is cheaper than a gm intake and will out flow the z06 intake!
You did an awesome job explaining everything you were a great help and I appreciate it. I’ll make sure to share them and wish you a lot of luck.
Thanks!
Thanks for the video, working on my first c10 ls swap, so far on the right track.
Really appreciate people taking the time helping out people like me
THANK YOU SO MUCH. I LOVE LS SWAPS !!!!!JUST KEEP EVERYTHING SIMPLE AND BASIC.
If you know how to use tools, follow directions, are interested in the process, and are patient, anyone IMO can do an LS swap. TH-cam is your best friend and you can find everything there and on the internet. I bought a wrecked Escalade with a 6.0 from Copart (which was the biggest expense by far, but it was running so I went with it), did my own engine rebuild with a mild stage II cam, had my tranny billet built, and bought build parts as necessary. Like he said, go Gen III. If I had to guess, I'm probably around $7k in, but my truck powertrain is practically brand new. I used probably 80-90% of the donor (engine/tranny/ecu/intake manifold/drive shaft shortened). The most expensive parts that weren't off the donor were the radiator, harness, and fuel tank. I also went with aftermarket gauges and put 3.73 gears in as well. I work and have 3 kids, so it took me about 10 months to finish. I'd put my build up against any garage because I'm an OCD perfectionist.
I rebuild transmissions for a living and you should definitely run it to the radiator. Adding an aftermarket cooler after the radiator is great but you want that stock cooler
What's the benefit, it sounds like the external is keeping the trans nice n cool as it is why add the complexity? Granted its not that difficult to add it to the mix but I'm trying to understand your logic. Thanks
Thanks for sharing your knowledge on doing these swaps. I am getting ready to swap and restore my fathers Chevy 150 sedan and although i have a general idea of how to do it, your videos have helped me simplify a plan to do it right and stay basic. I'll have to tackled the rear end since it shot but thats going to take some time and research. I'm super happy i found your channel.
I've always run my automatic cars with a separate trans cooler. I heard years ago if your motor runs hot and trans is hooked up to radiator it will make trans run hot too.
Trans coolers save transmissions! Especially the weak POS 4L60Es but I put them on everything I tow with. They're cheap insurance and it's satisfying never having your transmission get hot. Hydraulic fluid does not benefit from high temperatures (the reason jet fighters use fuel/hydraulic heat exchangers). Trans coolers are like a sore dick, ya can't beat it!
@@obfuscated3090 🤣🤣🤣👍
About to undergo my first LS swap into an 83 RX7, very excited watching something like this as I’m used to dumping 10K into a rotary and it dying ☠️
YO I just got an 88 😂 and I’m doing the same
Can you send me the link for the wiring harness you use? Thank you
17:19
np broski
@@joogullae3456 - actually he made a newer video with the links
hey I like your channel I think that's cool for a basic swap
I can’t wait to swap my 2011 Cadillac CTS coupe with a 5.7 or 6.0 I want to keep it like OEM on the outside but , under the hood would be a beast of an engine
I have a question the motor mounts plates you showed on this video with all the holes in it.????
Are they adjustable motor mount plates so you can push the engine back more further or you can move the engine further forward for different combos and setups????
Agreed, if YOU do it yourself and are on a budget, you can do them this cheap. But I get people asking me for quotes and expecting me to quote them $4500 for a swap, parts and labor! lol
Where are u located
Yeah I’m not trying to do anything crazy, just thinking bout LS swapping a BRZ
Somebody has probably done it. I've seen LS swapped 350z. It might be better to get a WRX donor and swap that motor and trans.
This was super helpful for me because I was one of those saying to myself I'm gonna have to drop ten grand to get it done "right" 👍👍 Thanks, bro.
Appreciate you giving us an update, most of the stuff I see is pretty dated now, I like you comment about trying to use Amazon first then E bay due to the ease of returning, thanks!
Appreciate the video and info.
You started with a surplus of $50, though.
Sold an engine and trans for $900, then paid $850 for the LS, which left you $50 in surplus.
Wow man those motor prices are high. You can get a 5.3 with the harness, ECM and transmission for 650$ here in Ga.
Bro I just subscribed and liked the video because you gave a no bs swap detail and I greatly appreciate that.
If I had a way to ship engines out your way reasonably I would do it. I'm up in the Northeast and the yards are polluted with rusted/crashed trucks and vans.
The past 3 engines I bought off of marketplace or local cuz they were not much more then junkyards and I didn't have to pull them.
Where ?
I'm in MASS I'm looking to do an ls swap into a 00-02 4wd S10 pickup. Id be on the tightest budget possible and be doing as much if the work myself which I'm hoping would be about 75%. I have a 00 crown Vic w. A 4.6 w. Exactly 100k and chance ran fine when I parked it 2 yrs ago and the transmission only has a little over 10k on it (newly replaced) so I'm considering pulling that motor and trans and either selling it to buy the LS or possibly just building it and saving it for another ford. The car has some from the rmv in it so I can't move it or start it or drive the car only reason it's sitting. Mass rmv is the worst. Sorry for the long response. Alot going on lol
in the process of swapping a Datsun 280z over on my channel. some great info in here, thanks dude
pretty cool car, subbed
I have a ‘08 gmc work 2wd truck the frame has cracked. Only 110k miles so thinking about using it as a donor for something classic. Good video!
Also no one considers changing platforms. Exaple if your putting one in a 4cyl car youll need a a lot more stuff like radiator, driveshaft, axles, mounts, linkage, and plumming
Awesome information. I'm doing a 5.3 swap into a 1995 Astro. I should be able to do it for about $1,000.00. I got a complete running 2004 Suburban for the donor for FREE. I'm going to use the stock ECU and fuse/relay box. I'm backing it with an NV4500 so I'm going to have to buy a flywheel, pressure plate and clutch though.
Awd or RWD?
@Logan Staal , it's AWD but I'm also swapping the AWD transfer case with a NP241c so it will be 4WD.
Thanks for the info. Thinking of swapping my daughter's 78 Z28 Camaro. The 400 Pontiac I put in there 20 years ago is about done.
How much do u do ls swap for
How about Oil pans ?
The more clearance the the better I'm assuming.
Have you ever used those harnesses on a 4l80 when doing a ls swap? Have a link for the harness you’re using currently?
Terrific video!!!! I’m just getting my 92 Camaro LS 6 liter with a Aisin 5 speed from a Chev Colorado and Fabbot conversion I have done a complete ground up build by myself on a budget
Thank you for your video
Dude, is that a '72 Chevy Vega GT wagon I see? Cobbled together may not be the 'right way', but it sure as hell can be considered a 'proper way' if it all works together w/out major flaws :) Love it!
I like the alternator on the passenger side. Will the wire reach if I switch it gyro the driver side? Or do I have to get a wire harness with a longer wire
I would like to do that in my 66 impala SS. Looks intimidating. wouldn't even know where to start. Motor mounts and transmission mounts are different. What about the drive shaft? Very reliable option.
Awesome video. I'm in the process of putting a 5.3 in a S15 and this video answered a lot of my questions! 👍
Can you go over what you needed for you harness for the 4l60 n 4.8,what was needed for the ls 1 intake fuel pump set up ect,what you all did to make it work
its all in the video Ace
Have a question! I’m more a cheapy guy, do you think it would be a simple swap to install a 3800 series 3 motor into a Monte Carlo SS 80’s model? I like the fact that they’re the most reliable engines and I want a cruiser!
I can’t find the video that showes your motor mounts trying to ls swap a 1970 challenger.
That's a cool Mopar. Did you have to fab up the trans brckts? Always wanted to get an LS in a A-body. Great vid
I have a 64 Skylark I was going to put a Nailhead in it.....but I have a 2000 Yukon XL I stopped driving but it still runs....after this....I'll pull it...freshen it up & put it in the Skylark.
Hates the word do it right, proceeds to show you a swap done right lol. That’s a clean set up. You can do it for cheap if you got the skills. That harness is indicative of your work. Looks sharp.
Good video. I have a 60e in my wagon swap still hanging on. Cool thing about the 60e, is your buddies will pay you to haul them off.
Awesome job explaining the swap. Very informative. We haven’t made the jump to ls yet but gonna try it eventually. Good job !!
Couple quick questions, If I found a donor 4wd truck, could I just remove the transfer case and use the motor/trans? Alot of old rusty trucks here in the Midwest but the drivetrains still going strong. Other question, if I wanted cruise control, how could I swap the steering column or use an 80's style steering column?
Man you should put a link up to all of these parts that you’ve used. Like the trans cooler
I made a video of cheap LS swap parts list.
@@krustyclassicsgarage where you located ? For some work ?
@@SamAugust - Temple , TX
@@RustyZipper you have a contact number?
@@krustyclassicsgarageWhat will you charge for a ls swap on a 84 Montecarlo
Hey i love the content!
I want to start by saying I just picked up my first project. I am not the most mechanically inclined person but this has given me a ton of confidence to tackle a project like this.
Would you mind sharing how you source these engines? Simple google search usually results in prices that seem drastically higher than what your referencing.
Keep up the awesome videos!
What LS’ is better 5.3 2008, or 5.3 2003.
2003 won't have Displacement on Demand. You'll also need to decide if you want Drive by Cable or Drive by Wire.
Can you tag which wiring harness from Amazon you have been using? Also why did you need a new accessory drive bracket and power steering pump? Clearance?
I have a 1978 D150 with an LA 360 that runs great! I wanted to rebuild the motor or do a Hemi swap, but I'm leaning towards an LS swap!
I just paid 490.00 for a complete 2003 gmc 1500 wrecked and will be using the 4.8 for a swap and selling off parts to help fund the ls swap.
Wicked! Another Texas native! Where abouts you at? I'd love to pick your brain on swaps.
You wanna do a LS swap on my FJ60?
What scares me is the fuel lines and electrical. Got a 98 gmc Sierra I’d like to LS swap.
Only thing I don't like about the Amazon/Ebay harness is they are not txl/gxl wire, they are pvc sheathed and will melt. In a pinch or extremely tight budget they will work. For me I'd skimp somewhere else.
I sincerely appreciate the honesty Man... Subscribed...
Florida too bro. Up in Pittsburgh people give 4.8s away to get them out of the way.
Mane im only in about 550. Not including the trailer I had to rent to tow the vehicle. But a complete 2000 silverado, just a broken tie rod and cut thru tank. Me and my dad went half cuz he needed the trans for his 2006, and other interior stuff.
That’s fantastic! I had an ‘03 Silverado
Good video on getting me started on my 86 Chevy Silverado that was my fathers I’ve been holding onto for 20 years and finally I’m on my way with a swap! Thx but I have a 6.0 2012 L96! Might get a little bit more pricey
Yuo make looks easy because yuo have everything under control
Besides trying to do it yourself, I bought a 5.3 swapped iroc z, it drives but nothing else works, wiring and gauge wise, where do I get all the knowledge to know how to fix a rear diff or suspension or fix a rusty body, I'm looking to start building a car from the frame up next but I've had 0 car building experience
I’ve had good luck with the eBay/amazon 6an line kits. Have it on my 84 dodge d150
Yup. Used the Evil Energy PTF lines and fittings on the c10 I just finished in my last couple videos.
We should start sendin you some stuff from here in South Carolina still kinda cheap here. Good videos, keep em coming
What about the fuel tank? What. Tank can I use? 16:21
I really want more power in my ford ecoline van. That haul my turbo busa in for track use. I really want a LS swap for it.
I'm doing my first swap and I just Wana do basic any way you can put the links of what you bought ?
I’m in Killeen doing a swap. I bought a donor avalanche for $1000.
I am doing an ls2 s2000 swap, what has your experience been with which harness might work with ls2, they mostly say ls1, and have you figured out which headers or manifolds are closest to the block. Clearance problem with clearance on honda swaps. Good and much needed video. Thanks
I have a 280zx I’m going to do a v8 swap as I have a great 350 SBC. I was going that route becaus everyone said an LS swap would cost me 10-12k. But you give me hope. I’m going to sell the L28 engine that’s in the 280zx.
Can you drop the link of the harness
Awesome job I'm not a LS guy but I would like to do a s10 swap LS . What part of Texas are you in? I'm getting ready to put my big block in my 88 monte carlo SS in 2 weeks. Thanks for the video
Temple, TX
Love the video bro !! Straight to the point and you answered all my questions!! I’m swapping my 85 cutlass with a 4.8 next month.
how is it going? your LS
$850! You’d be lucky just to get the block for that price out here in Cali
I have a 2007 5.3l and I'd like to go DBC but the only standalone harnesses come with it is the DBW. Could I just cut the DBW off the harness?
I got my first 5.3 for 150 with everything wiring harness and all belt accessories
My opinion is ls are cheap if you can still source them in the same manner. Junkyards are a wast of time now days. You just need to be creative.
I got a $2000 doner denali escalade $2500 for internals
$3500 t56, microsquirt ecm and harness $400, $300 radiator, $600 driveshaft and then $300 for misc. So i did my whole swap for about $8,000 total. Less then a new ls3. And i got a brandnew tranny and basically motor. I consider that really cheap for a fresh 600hp.
Yes would you be able to post the harness link on the video description.
17:19
🤣🙌🏼
@@hugolikejuice - he actually made a newer video with the links
I'm getting a 5.3 out of a 2000 4x4 chevy truck. I wanna put it in a box chevy impala. Do I need to get the harness setup from the truck to go with the motor?
Thank you for this video I hate seeing the post on fb and the shops chiming in saying start at $10k I troll every post I find about this
just found your channel. definitely looking to LS2 T56 swap my 2004 Lexus IS300 in the future. great videos. keep up the awesome content
98 4x4 2 door Tahoe thinking of making the swap simple bolt in ? What are your thoughts ? I’m in Dallas I enjoy your vids 👍🏻
Should be the same as the 93 OBS video I have on here
Hey where you get the low mount bracket for your alternator
I’m about 2 1/2 hours from your shop. I need to get in touch with you and see what we can do. The guy quoted me 10k was a shop in okc
The cheapest engine you can do in California from pick n pull is less then 100$ on 50% off day. Will be more if you keep the accessories. Only issue is your gonna be fighting over spots
Great video very informative and to the point thank you,how much are you changing for labor?
Would u use the sending unit in a 67 camaro for the return gas.line an then weld a bung fitting in the bottom Of tank for new gas line with pump an filters the evil energy gas pump I have sez it should be lower then gas tank
Dude that bay is beautiful
Nice vid.. I got a chevelle I'd like to ls swap. Got a engine and everything sitting outside in a old gmc yukon ..
MY LS SWAP WAS NOT CHEAP...!
i had a running 305 in my 85 cutlass supreme and thought i would do a super cheap Ls swap for 450 $ running 5.3 Ls.
the engine itself was cheap but all the modding and brackets and conversion hardware ended up costing several thousand bucks.
Maybe couldve done it cheaper but not in middle of covid and it wouldve taken a year instead of 2 months.
Looking back in hindsight not sure i would do the LS swap again, depending on price of a basic 300 Hp crate engine , it definitely wouldve been easier to stick with a SBC and i may still have AC which wouldnt easily fit with Ls engine.
Yeah all these people on TH-cam saying 5-10k on parts for an old motor is cheap.. like what? You could have just got a new crate motor that's more reliable. all these foreign third parties making replacements also ads to the price. Can't get cheap factory parts when the factory doesn't care anymore. 😂
Same. Did mine during Covid. 85 Monte. Paid 600 for engine and trans. Everything else was about 4k plus the 1500 for labor. I didn’t do it. So it was a little over 6grand. Out the door. Took a while. Almost a year due to Covid couldn’t get parts unfortunately. And it wasn’t even a “LS”it was out of a Tahoe. But for another 300plus I can get the ls intake which looks way better than the truck intake manifold.
Same, I'm staying naturally aspirated for that reason. Such a hassle, I just wanted to ride. Which is what I'm doing now
Yea when you're paying a shop a 100 plus an hour
@@patrickdolan. i did the work myself bro, 99% of it
I'm new I have many Qs . One is can I use a 6.0 from a Silverado HYBRID in a regular gas 1500 Silverado? Main concern is the starter, flywheel, and cpu
i got a 5.4 triton 2004 expedition, would love to do this
Just bought a 130.000 mile LQ9 think was an 05 Escalade $1100.00 everything included down to the pedal. Also a Gen 3 LQ4 with everything $1000.00 think that was 180.000 mile.. Idk thought that was kinda much but i grabbed while the getting was good.. They pulled and shrink wrapped for me so easy load up
Serious question... I have a 2015 Altima and I have a 2006 gmc with a 5.3
How much would you charge for labor for the swap? Also do you rebuild engines also? If not id get that done then have you do the rest. Literally being very serious.
If the ls motor will fit without having to change intake, exhaust manifolds or the accessories, it can probabky be done cheap without too many problems. If the ls motor won't fit as complete, doing a cheap ls swap is a real pain and takes some real creativity and effort.
I’m in Houston , looking to do this on 61 impala
Can you do 2014 CTs 2.0. Want to swap it with ls motor.