Audi Q5 epb module Repair

in this video i am diagnosing and repairing a Audi EPB (electronic Parking Brake) module, that is throwing a code about one of the wheels not working properly.
thanks for watching.

[@matus158]

Wow! This is maybe the only video I've found on the whole internet, which shows what's inside that mystery EPBM box. Thank you! Sir, Your video gives me a hope, that maybe I can repair my "EPB problem" which looks exactly the same, just different car (Ford Smax/Galaxy 2006-)

[@PSICompanyPerformance]

Thanks for watching.
I never openned a Ford epb module but i guess it will be the same principle since it does exactly the same function.
Good luck

[@lonetraveler5660]

Excellent. I had the similar issue with my Volvo s80. I opened the epb module long time ago. Just don’t know where to start. I will check the mosfet. Thank you again

[@bespartyjny]

Thank you very much for help

[@vailtonbeserra9408]

Great job and great video man !

[@PSICompanyPerformance]

Thanks for watching

[@aca95ful]

I have the same issue (Audi Q5, 3.0TDI) , the same control light... Since it appeared i am not able to use gearbox, due to that even not start the engine... i am gonna replace both MOSFETs today and let you know about my experience. Thank you very much!

[@PSICompanyPerformance]

good luck my friend and thanks for watching

[@53Talib]

Thank you, it's a very nice video. You are very clever . Can you help me with errors on the EPB. I have a vw passat. It's the same problem. I have changed, bought a used car and changed the strynen unit for the electric parking brake. I want to repair old . The same car has the same problems with the reversing sensor, which I want to repair

[@lafunciondelarte1510]

thank you

[@dzcars9434]

Thank you very much for your vidéo it's help me à lot for my passat

[@PSICompanyPerformance]

thanks for watching and feedback.
im glad it helped you.

[@adnabandasha3201]

@@PSICompanyPerformance hello sir I HV issue with q3 2018 right hand drive in India..DTC c200d12 .left parking brake motor voltage supply short to B+
C10E129 Par king brake motors .implausible signal
Both are active
Pls reply

[@PSICompanyPerformance]

@@adnabandasha3201 thanks for watching.
That is the same issue i had in the car in this video.
In this case it can be the transistor or the double relay you need to test those..
Good luck

[@adnabandasha3201]

@@PSICompanyPerformance hopes it does solve thks sir .

[@adnabandasha3201]

@@PSICompanyPerformance sir can I get ur mail I'd or wattsup ...

[@simplyme207]

Olá PSI, precisaria da sua ajuda com um problema similar num A5, e teria todo o prazer em levar a viatura à sua oficina. Haveria forma de entrar em contacto consigo directamente? Obrigado

[@lonetraveler5660]

I checked 4 mosfets. Seems they are fine. Both relays also click. My error code are lost communication between pbm and bcm; pbm and cem; red park brake warning light flashes all the time. What parts on the circuit should I check? Resistance between signal wires is 61.8 ohms. Seems can bus wires are ok. Appreciate any suggestions. Thank you

[@PSICompanyPerformance]

Thanks for watching.
In order to help you i would have to have a pbm in my hand now...but i dont , so i cant really tell you where to look regarding that dtc...i will as soon as i get a car with a similar issue i will try to dissect the entire board to help people in many other errors than the ones i get.
Good luck

[@damer950]

what type of mosfet is that? i need to repair my A4 B8 module...vag shows some DTC but handbrake is functional..thx

[@PSICompanyPerformance]

Thanks for watching...
I show in the video both the original and the replacement transistor refences...
I bought the replacement from Mauser.com.
Good luck.

[@thestallionsentertainment1217]

Could replacing the ECU work too?

[@PSICompanyPerformance]

Thanks for watching.
Yes it will work but you will need to code the new or used unit to your car ...
But yes it will work.
Good luck

[@igfc289]

Hi
By the chance do know where the sunroof control module is located?

[@PSICompanyPerformance]

Thanks for watching.
The module is j245 and is attached to the sunroof motor itself.
Good luck and hope it helps.

[@igfc289]

I have a 2014 a8l which has the same panoramic sunroof and they look the same.
Thank you

[@besas4513]

Well Lad, how I can contact with you?

[@frederickdvorak6502]

Question: I must change the EPB module on a 2010 Audi A6 Avant and, considering the age of the vehicle, want to avoid paying the 900 euros that Audi are asking me to fit a new one. Buying a second-hand EPB module and fitting it is within my limited mechanical skills. I can also buy the plug. Together, these 2 items are rather inexpensive. But, where/how can I buy the module programming software and how much does it cost please? Thanks.

[@PSICompanyPerformance]

thanks for watching.
you can buy the cable and software from many places on the internet Ross tech , Vagcom, Vag commander, abrites, etc all of the above will code this module to the car. Make sure you choose a version that is compatible with the cars age.
good luck

[@frederickdvorak6502]

@@PSICompanyPerformance Many thanks!

[@adnabandasha3201]

What was the code sir ...parts availability link pls

[@PSICompanyPerformance]

Thanks for watching.
The parts are described in the video and i got them on Robert Mauser site, but you can get them in Farnell site also.
Good luck

[@zengzhaohui]

This is awful good.

[@adnabandasha3201]

Sir pls give part number new part ...in video not able to see clear .

[@PSICompanyPerformance]

Ok i will see and give to you in writting

[@PSICompanyPerformance]

You can see it at 5.33m very clearly.
Good luck

[@adnabandasha3201]

@@PSICompanyPerformance iam unable .and video quality not available in settings

[@adnabandasha3201]

@@PSICompanyPerformance thks for reply ...

[@PSICompanyPerformance]

@@adnabandasha3201 BL1D12

[@ndimugo]

Fd83444L