2012 Audi Q5 sunroof shade replacement The dealership wanted $1500 for the job but I decided to do it on my own and it took about 2 hours to complete. If you need any help comment below
WARNING: DO NOT DO IT THIS WAY!!!!!!! The metal slip that has to slide into the track actually REQUIRES you to take off the entire roof liner from the front of the car to the rear, AS WELL AS removing the entire panoramic roof assembly. Other wise you CAN NOT slide the metal into the enclosed railing!!! “Service Mode” is for Service, NOT repair. This guy will absolutely destroy the value of your Audi if you do it this way! TAKE IT TO A QUALIFIED PROFESSIONAL OR TRADE IT IN IF YOU CAN’T AFFORD THE REPAIR!!!
the second half of video is taking it to a dealership. It is not possible to put the shade back in without taking the headliner down. Thats why he didn't show it going back in.
it's interesting to me that there are about 3 videos on this (and some tiguan videos) that show how to break down the car to get to the shade compartment and then they stop there. what is that all about? i did what you said step by step and then theres no information on how to get the shade into the compartment, then what to do after that because it appears that there are some channels in there to feed the shade through that you can't do without taking it out. then when i finally did get the shade in there, i couldn't get the plastic tabs to work with metal ribbon attached to it. it would be very helpful to see all of that. in fact, i was videoing and if successful i was going to upload that part of it. sadly i was not, i ended up tearing up the shade that i wasted $60 bucks on and broke one of the plastic pieces that you take out after the glass removal. i have no doubt you were successful, but there are some major steps missing that would have been very helpful to see before i wasted two days and sixty bucks and i'm still going to have to get someone to fix it because i'm going to sell the car. no disrespect intended but it would have been nice to see what you (and others) did before attempting this. i will never buy another audi again, at least not with a shade like this.
So I too am to the last step but the roll of mesh will not fit through the back nor through the roof with the glass removed. How did you feed the new piece, which is just over 1 1/2” or so in diameter into the slot where it goes?
R H , thank you for the video. can you please explain how you got the shade part in the rail( i understand where how it sits on the blue tracker)? where im stuck is trying to get the shade in the rails- i was able to do with gray plastic tabs off and then was able to put them on when shade coil was in track , but wasn't able to get gray plastic thing attached to coil hole ( need some wiggling room to do it , but once coil is the track there is no room). then i tried with plastic tabs ON right away, hooked in the coil , but its too wide ( literally about 2 millimeters on each side ) to get through the back , it hits the shade cable area (bracket) before blue tabs. (if you look from the back) . Anyhow, wondering which way you did yours. thank you
Why do you have to take the blue plastic out? leave it there and install the shade grey plastic clip onto it. I bought a shade shipped from china for $25 total cost and successfully installed on my Q5 after watching this video and some others. This video is good but does not show in details. I have to figure it out by my self how to do it specially the way to install the 2 end plastic clips to the aluminum bar. I wish there is an option to post the photo on youtube to make easier explanation. I took some photos but no way for me to upload.
WARNING: DO NOT DO IT THIS WAY!!!!!!! The metal slip that has to slide into the track actually REQUIRES you to take off the entire roof liner from the front of the car to the rear, AS WELL AS removing the entire panoramic roof assembly. Other wise you CAN NOT slide the metal into the enclosed railing!!! “Service Mode” is for Service, NOT repair. This guy will absolutely destroy the value of your Audi if you do it this way! TAKE IT TO A QUALIFIED PROFESSIONAL OR TRADE IT IN IF YOU CAN’T AFFORD THE REPAIR!!! (My personal advice: If you can’t afford it and you’re worried about it becoming too hot in the day, go get the roof glass tinted as dark as you can to where you can still see through it. Much cheaper and still has the same effect)
I was able to get through all the steps in the video and pull the old torn one out. From the top toward the back of the sunroof I slid out the black rubber piece that holds the piece that goes back and forth. From the trunk I was able to take out white plastic roller that holds the sunshade together. I haven’t ordered a new one yet. But put the whole thing back together sans the sunshade. I have the same question as some other people. How do you get the new one in? I assume it comes in rolled on the white plastic. The front has the slid in from the top. But what about the actual white roller? Do you put it in from the trunk or the top from the sunroof side? Please help
"I assume it comes in rolled on the white plastic. The front has to slide in from the top. But what about the actual white roller? Do you put it in from the trunk or the top from the sunroof side? Please help"
I love my audi, but this mesh thing is just a proxy cheap-Arse idea in my opinion. The rest of the car oozes class, but this looks like the work experience kid designed it That’s not a slur on your video, I commend you on your video and that you could replace this shade with kids in hearing distance. My whole neighbourhood is going to be able to swear like a bullocky driver if I attempt this
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
The best explanation that I found !! congrats
Thanks for the video. Just watched a video suggested above this one from an actual auto shop that explained nothing.
Lol saw that too, awful.
What size torx bit. And when you say “adjust your window” what do you mean exactly?
Excellent for getting the old shade out but .. putting the new one In seems to be a challenge any tips or info on that part
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
WARNING: DO NOT DO IT THIS WAY!!!!!!!
The metal slip that has to slide into the track actually REQUIRES you to take off the entire roof liner from the front of the car to the rear, AS WELL AS removing the entire panoramic roof assembly. Other wise you CAN NOT slide the metal into the enclosed railing!!!
“Service Mode” is for Service, NOT repair. This guy will absolutely destroy the value of your Audi if you do it this way!
TAKE IT TO A QUALIFIED PROFESSIONAL OR TRADE IT IN IF YOU CAN’T AFFORD THE REPAIR!!!
Thanks for the video.
Thanks for the video, but the end was a helluva cliffhanger. I’m stuck at getting the sliding rail off
Sorry about that. It’s my first video
the second half of video is taking it to a dealership. It is not possible to put the shade back in without taking the headliner down. Thats why he didn't show it going back in.
@@chadcrist8204 after you pop that black cover off of the shade it’s pretty self explanatory
it's interesting to me that there are about 3 videos on this (and some tiguan videos) that show how to break down the car to get to the shade compartment and then they stop there. what is that all about? i did what you said step by step and then theres no information on how to get the shade into the compartment, then what to do after that because it appears that there are some channels in there to feed the shade through that you can't do without taking it out. then when i finally did get the shade in there, i couldn't get the plastic tabs to work with metal ribbon attached to it. it would be very helpful to see all of that. in fact, i was videoing and if successful i was going to upload that part of it. sadly i was not, i ended up tearing up the shade that i wasted $60 bucks on and broke one of the plastic pieces that you take out after the glass removal. i have no doubt you were successful, but there are some major steps missing that would have been very helpful to see before i wasted two days and sixty bucks and i'm still going to have to get someone to fix it because i'm going to sell the car. no disrespect intended but it would have been nice to see what you (and others) did before attempting this. i will never buy another audi again, at least not with a shade like this.
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
I had some hope for a full and complete DIY video.
I can help if you get stuck on something
So I too am to the last step but the roll of mesh will not fit through the back nor through the roof with the glass removed. How did you feed the new piece, which is just over 1 1/2” or so in diameter into the slot where it goes?
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
R H , thank you for the video. can you please explain how you got the shade part in the rail( i understand where how it sits on the blue tracker)? where im stuck is trying to get the shade in the rails- i was able to do with gray plastic tabs off and then was able to put them on when shade coil was in track , but wasn't able to get gray plastic thing attached to coil hole ( need some wiggling room to do it , but once coil is the track there is no room). then i tried with plastic tabs ON right away, hooked in the coil , but its too wide ( literally about 2 millimeters on each side ) to get through the back , it hits the shade cable area (bracket) before blue tabs. (if you look from the back) . Anyhow, wondering which way you did yours. thank you
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
Two questions.
1. My sliding sunroof shade is kinda ripped out at front left side. Any repair for that?
2. Why did you change your?
Mine disconnected completely on the left side
@@rh696 any repair, like connect it somehow or it has to be replaced? Thanks for answering
@@Dexa89 both are not an easy task. I don’t see how a repair would be possible without taking it off.
Is there a part 2 ?
No sorry it was my first video🤦🏻♂️
Could you please tell me where you purchased from?
eBay
Aliexpress
stuck at the point where I can't get the blue plastic tabs out of the guide from the back. any suggestions?
Why do you have to take the blue plastic out? leave it there and install the shade grey plastic clip onto it.
I bought a shade shipped from china for $25 total cost and successfully installed on my Q5 after watching this video and some others. This video is good but does not show in details. I have to figure it out by my self how to do it specially the way to install the 2 end plastic clips to the aluminum bar.
I wish there is an option to post the photo on youtube to make easier explanation. I took some photos but no way for me to upload.
@@bose3158 , Hi Tuan, i just left a comment in general comment section, do you have anything add to that? thank you.
Ugis Kanders
Hi mate
Email me at bose3158@gmail.com. I will send you some photos step by step.
Cheers
WARNING: DO NOT DO IT THIS WAY!!!!!!!
The metal slip that has to slide into the track actually REQUIRES you to take off the entire roof liner from the front of the car to the rear, AS WELL AS removing the entire panoramic roof assembly. Other wise you CAN NOT slide the metal into the enclosed railing!!!
“Service Mode” is for Service, NOT repair. This guy will absolutely destroy the value of your Audi if you do it this way!
TAKE IT TO A QUALIFIED PROFESSIONAL OR TRADE IT IN IF YOU CAN’T AFFORD THE REPAIR!!!
(My personal advice: If you can’t afford it and you’re worried about it becoming too hot in the day, go get the roof glass tinted as dark as you can to where you can still see through it. Much cheaper and still has the same effect)
How long did it take you to do all of this?
About 2 hours
I was able to get through all the steps in the video and pull the old torn one out. From the top toward the back of the sunroof I slid out the black rubber piece that holds the piece that goes back and forth. From the trunk I was able to take out white plastic roller that holds the sunshade together.
I haven’t ordered a new one yet. But put the whole thing back together sans the sunshade.
I have the same question as some other people. How do you get the new one in? I assume it comes in rolled on the white plastic. The front has the slid in from the top. But what about the actual white roller? Do you put it in from the trunk or the top from the sunroof side? Please help
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
@@bose3158 Hi, do you still have the photos or videos, and could you share them with me? I'm also considering replacing my sunshade.
Hi I am about to begin this repair, RH any chance you might answer this question above before?
"I assume it comes in rolled on the white plastic. The front has to slide in from the top. But what about the actual white roller? Do you put it in from the trunk or the top from the sunroof side? Please help"
Hey if u don't mind how much will you charge me to do my sunshade on my 2014 Q5
Where are you located? I’m in MD but probably like 500$. I’m not sure how much the shade cost now and days but I’m sure it’s not much
Hey I am in Meridian Mississippi. Can u send me where you purchased your sunshade at.
@@jamesmyers5440 I purchased mine off of eBay and they no longer sell the shade
Ok I appreciated I am going to jus have to find another site
@@jamesmyers5440 👍🏽
You dont show it
Is there any thing inside the black tray other that just the screen?
Just screen
I love my audi, but this mesh thing is just a proxy cheap-Arse idea in my opinion. The rest of the car oozes class, but this looks like the work experience kid designed it
That’s not a slur on your video, I commend you on your video and that you could replace this shade with kids in hearing distance. My whole neighbourhood is going to be able to swear like a bullocky driver if I attempt this
Thanks bro 😂
Where are yu located?
I was in Kansas but Now in Maryland
How can i put it back ?
Hi mate
Pls email me at bose3158@gmail.com
I will send you some photos step by step how I did to install it back
Cheers
@@bose3158 thanks i have send you on E-Mail adress
Bizarre use of the word ‘window’ to describe the sunroof.
Hello,
Can I have any other detail video or manual with you to share.
I have my Q5 2012 or do u know anyone who can help me to replace it?
I had some quote around for $1600 but after watching the videos i did it myself for total cost of $25 and 1.5 hours.
@@bose3158 Where did you purchase the curtain from? Marcus
@@HeadlinerMagic
From AliExpress if you have time to wait
@@bose3158 Hey Tuan, any chance you can email me some photos or videos so I can give it a go myself? Thank you in advance.
Where did you get the shade replacement? I am going to attempt to do this myself.
eBay
Link to where you got the replacement?
I got it on eBay and the seller no longer sells them