Polishing BAD Swirl Marks Out Of Black Paint! (Very Satisfying)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Here we showcase how to paint correct swirled black paint back to new!
FOLLOW ME!
► WEBSITE: matdetailing.com/
► INSTAGRAM: / matsdetaili. .
► FACEBOOK: / matsautomoti. .
#polishingblackpaint #badpaint #restoringblackpaint - ยานยนต์และพาหนะ
Looks great! And it really made me realize how badly the screen on my phone is scratched!!😂😂
😂😂😂😂
polish it 😂
Can I??😭@@endritmustafa9584
Hilarious
Anyone saying to do this or that.. you’re wrong.
He did it the correct way. Just enough correction without taking to much away
After trying different methods
The one that really works on a budget is:
1.Rotary buffer not Dual action
2.Meguiars ultimate compound with yellow cutting sponge from harbor
3 Meguiars ultimate polish with black sponge from harbor
Then any $25 ceramic coating(small glass bottle)
This all depends on the paint as all cars have different variations such as, thickness, how soft or hard the paint is etc..
That method on the paint above would have high risk of burning through and isn't needed to achieve good results. However with hard paint that would be a great combination to get the most defects out with a flawless finish.
Thanks for watching!
Mat
@@MatsDetailingNo it wouldn't! Don't try and make everyone think you (Have) to use a DA! I've been detailing for 25 years and all you need is experience with a rotary. A DA can burn through paint as well but a DA is too time consuming.
@@charlesrobinson6574I just bought the rupes 15 mark 3, I will be using that & a URO micro fiber pad + 3D one polish/compound combo, is this fine? Or do I need a rotary
@@senorbonbonhow did it turn out? What color is ur car too?
@@Rodrickrodneyits a great combo tbh, a rotary is better for deeper defects to be removed
Respected detailing so much after I tried this my self and realized how long it really takes
Paint correction is a long drawn out process to do it correct. I spent 14 hours in my f250 AFTER the wash back when I first got it. But paint looked amazing.
I would've probably gone just a tad bit more aggressive. However, idk the paint quality or thickness so possibly the right move
that turned out awesome
@@Aaron___daniel thanks!
Looks great hey consider a rupes wool pad with the DA. Also really like the 3D product. Then finish with a finish pad. Saves time, just my thoughts. You did a great job
Mmm glass. Nice work
Dude, is this ACA 520 and soft sponge you are using?
Got a job this week. I compounded the crap out of a car and nothing came out. It came shiny and i showed one of the techs and he said thats as good as it gonna get. I want to know if compound, a DA and a rupes da wool pad can really take out scratches because i have never been able to do it. From a video it looks like it all came out but standing there under the light it looks like no difference but the obvious gloss. I havent worked enough places to actually see someone do it and the only time i ever get perfect paint is if i sanded it.
Oh my gosh I 100% agree with this I’ve done all different methods and compared to these videos they look like they get brand new paint from the factory. On the other hand, I get exceptional results but still very very minor scratches
Try using foam pads and also make sure you're not going too fast
I just started polishing almost a year ago and I have taken scratches out but I’m not getting all of them but that’s not my problem. Problem is I’m not getting that mirror reflection like I see in videos. My car a 2017 Lincoln mkz in black velvet. What I noticed tho was after I polished and held a light up to the paint I could see like blueish glitter/flake or whatever it called. So the polishing made me able to see that but only with my light from my phone up close. I wonder why I can’t bring that glitter out so you can see it in the sun from a distance ? I’m using expensive products that have great reviews. I used Koch chemie heavy compound on a lake country wool pad then I used griot’s all in one ceramic wax as a polish to finish with a griots orange foam pad. I wonder if the griots all in one ceramic wax is not good enough to use as a polish ? I thought it would be cause it’s a 1 step compound so it does everything in one so should be able to be used as a polish after I compound.
Sponge pad is better than a wool pad in my experience
Did u clay bar the car firs to get contaminates off
Would be nice to know the steps and the stuffs you used😮 keep up the amazing job!
DA polisher and some basic meguires compound, then polish will do the truck. They have a some pretty awesome easy to use stuff. There are different abrasiveness levels for compounds, and different "cut" levels of pads. Its either super simple, or obnoxiously complex.
Basic
Get the paint clean
Then buff it out
Try denim pads
wash it really well. Target a section on the vehicle...don't be greedy and try to wash a whole car + polish/waxing. You will feel the pressure of "taking shortcut" if you do.
What products did you use for 1st pass and 2 pass. And what pad. Looks good
We use the 3D Car Care range.
ACA 510 - Light Foam Pad
ACA 520 (Polish) - Light Foam Pad
Klasse ❤❤❤❤❤
Amazing💯
Como se llama el spray que aplicas al final?
Is that a spyder heavy polishing pad from 3D?
Gotta be careful when doing tape comparaison, i once did that and it left a permanent line in the clear right at the tape when i removed it
How's that possible? Just go over the tape line with a compound
@@stefanpetrov8 because the part that wasnt tapped on got enough clearcoat removed that there was a solid difference in height compared to the tapped side, had to sand block it to re equalise it lmao
@@Nowkoreto
My dumbass used the wrong tape to line up a fake shark antenna on my white civic 2010.
Tape tore off a chunk of paint off from the roof when I took it off LOOL. Meh, I dont care about the paint, im still working on other stuff and im not even to the bodywork yet, perfect match tafetta white fixed it like nothing happened hahahaha
What 2 part did you use!!! Great work
How do you get rid of those little white spots though? I got my car buffed but I still see little white spots.
What do you spray to clean it after? Alcohol?
What were your products like polish and steps to it?
Do you have a list of all of the products you used?
Good job..one more pass with polish tho
Would it really make that good of a difference? (Genuine question not being a smart ass)
@@Richardgg94does for me
@Richardgg94 It's down to the installer. normally you would match Polish passes to the amount of cut passes to ensure no micro swirls from the prior step get missed.
This paint however whilst working on it only required as demonstrated but adding another Polish pass wouldnt hurt as it just ensures even coverage and removal of any micro swirls induced
@@MatsDetailing thanks brotha
Nice
Damn i didn’t know they made xxxxxl ssbbw pads 😂😂😂
What product should I use I need this for g37x plz help I have the buffer just dont kno what pads
@Sinister_187 I'd recommend trying medium cut foam pads and then a fine polish pad.
Use a Cut Compound, Medium Cut Foam Pad
Then
Use a Polish, Fine Polish Foam Pad.
Each car is different and requires different treatments but is try this first.
What polisher r u using. DA or Rotary
I see a lot of people taping, is this just for the video? I’m trying to do my whole truck so I’m wondering if I just go to town in the whole thing without tape (obviously doing sections at a time.)
You only need to tape areas that have rubber inserts or mouldings as compound tend to stain these pieces.
Main reason we used tape in this short was to only showcase a definite line for our before and after.
Need to work it in properly the first time bro, work the compound until it’s a brand new panel
There are one steps and 2 steps. This looks like a 2 step !
Slinging product might want to use alil less to avoid having it ruin plastics and rubber gaskets. But nice work.
@johnathan4683 I agree, in this demonstration there was excess usage, thanks for watching!
Well, that told us NOTHING!
Like, what polish did you use?
Hey Barry,
Compound & Polish
3D 510 ACA
3D Polish
Pad
3D Fine Pad
Hope this helps!
What spray did you use at the end?
Isopropyl Alcohol, Carpro Eraser.
It cleans off any wax/oil residues that may have been left behind to show a true finish.
do you wipe it down with a wet towel?
Isopropyl alcohol wipe
Молодец теперь эта полоса останется
Big difference
Yoo can you explain the process tho I want to learn this man !?😅
Hey man, I'd recommend you tubing paint correction tutorials, it's a bit hard to explain the full process in a brief message. Hope this helps!
Dont do what he just did looks sloppy.
@@MHal312Imagine being critical of other people's workmanship based off a 20 second clip demonstrating severe swirl mark removal. Cmon then let's see how much better your workmanship is in a 20 second clip???
@joshbrookes6439 people will always hate, the only thing that matters in buisness is if we're happy and our clients are as well 🙂
Thanks for the comment!
@@MatsDetailing its youtube this is what its for… :)
What kind of light you using
One from our Local Depo, any quality LED light should suffice.
will the swirls come back??
Yes, but you can avoid it by polishing it with a paint sealant every now and then, what causes swirls is unprotected paint, and running it through car washes for the most part
@@habebs7345 no they wont. They are fixed. Polishing at this level mostly just removes the haze effect from more abrasive compounds.
Kaun sa wax hai
Çizikler?
What products you use please
In this video we used 3D's 510 aca compound and their refinishing polish.
With their soft cut/polish pad
Looks great. What polish and what was that final spray?
3D Polish and IPA to remove any residue for a true finish.
By IPA, do you mean isopropyl alcohol?
@@austinbyers1526 Correct, we use a made IPA called Fireball Reborn
Is this the ACA 520 or the hybrid “One” by 3D you are using?
Or both?
What did you spray on at the end ?
IPA (Isopropyl Alcohol) idk if it’s 70% or 90% though
Fireball Reborn or CarPro Reload are premade IPA solutions we used, we now use a 70% ISO with distilled water ratio as we've found this provides a nicer clean.
So do i apply this after polishing and waxing
Is that da or rotary
DA
Someone machine shampoo my car and the swirls and scratches are still there
What pads did you use and in what order?
Looks terrible
@@MHal312better than what you can do
its better but still bad
Buddy you need more practice trust me
Are you running the Maxshine m21?
Yes
Так нельзя делать.
탈지하면 기스 다보일듯 ㅋ