Porsche 914 Wiper Repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ก.ย. 2024
  • Time to finally repair a broken set of Wipers on a 914! We'll cover removal, diagnostic, and re-installation on a 1973 Porsche 914.

ความคิดเห็น • 15

  • @adamchaifetz5876
    @adamchaifetz5876 2 ปีที่แล้ว

    Nathan, James, and Tommy in the house, get it done.

  • @RossD8
    @RossD8 2 ปีที่แล้ว

    The memories. The mechanic that R&R'd my 914 wiper pinched the fuel line putting the tank back in.

    • @barefootgaragejax9252
      @barefootgaragejax9252  2 ปีที่แล้ว

      I’ve pinched the return line! Somewhere online I found the correct length to allow it to loop without pinching. Still not my favorite design!

  • @burdineestep4224
    @burdineestep4224 ปีที่แล้ว

    As a Porsche dealership tech - during the entire production run of the 914, you don't need to remove the tank to remove the wiper motor. Custom mod a 10mm.box wrench. Put motor/ linkage in park position , make note of this / angles etc. Remove motor. Saves time - I've R&R'd one in 45 min.

    • @barefootgaragejax9252
      @barefootgaragejax9252  ปีที่แล้ว

      Pro tip!! I certainly hope not to do that job again, but now we know

  • @cybersurfer2010
    @cybersurfer2010 2 ปีที่แล้ว

    Great stuff! Have to tackle this myself soon…

    • @barefootgaragejax9252
      @barefootgaragejax9252  2 ปีที่แล้ว

      Be sure to unbolt both sides of the cowl supports and pull the speedo for that inside support (I’d replace it). Good luck!

  • @Qspecialman
    @Qspecialman 2 ปีที่แล้ว

    That is a very helpful video, thanks. I have to do the same job shorty!!!!

  • @laurab23
    @laurab23 2 ปีที่แล้ว

    Wow!!

  • @JPA15
    @JPA15 2 ปีที่แล้ว +1

    How did you plug the return line at the tank? Putting dual carbs and would like to do the same

    • @barefootgaragejax9252
      @barefootgaragejax9252  2 ปีที่แล้ว

      Sealant, bolt and double hose clamp. I guess you could have it welded up, but this works well.

  • @Qspecialman
    @Qspecialman ปีที่แล้ว

    I am just about to refit the airbox on my car (originally I intended doing it a year ago!!!!) a question, why did you not fit the black plastic grill in the top of the airbox?

    • @barefootgaragejax9252
      @barefootgaragejax9252  ปีที่แล้ว +1

      I can’t recall of the top of my head, but only some years had this. My 72 does not, and I do not believe this 73 did either.

    • @Qspecialman
      @Qspecialman ปีที่แล้ว

      @@barefootgaragejax9252 Thanks for your prompt reply Jax. Perhaps Porsche had a problem with dead things collecting in the air box so on later models fitted the extra black plastic grill. Mine is a '75 car.
      What a pig it is fitting the airbag on your own!!!! All the best Tony.