ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- In this video I will go over all the parts that are in my freestyle drone. I built this drone a while ago but most of the parts I used are still very popular and perform very well for the price. Perfect for beginner pilot budget builds. Check out some more VIDEOS BELOW!!!
_________________________________________________________________________
WATCH THESE VIDEOS NEXT
TBS Unify Pro32 VTX Unlock bit.ly/3EHefUC
FPV FREESTYLE | NEW SPOT | Crashed my Drone bit.ly/3IAwpbU
New Drone Build 6S Beast | FPV Freestyle bit.ly/3ZkOy42
_________________________________________________________________________
DRONE GEAR THAT I USE:
Taranis X9D plus 2019 (Ash White)
TBS Tracer Micro TX
Skyzone SKYO4L Analog Goggles
ImmersionRC RapidFire RX
NOVA 235 5-inch Frame
MAMBA F405 MK2 with 40A ESC Stack
iFlight XING-E 2306 1700KV
Matek VTX-HV 500mW
TBS Tracer Nano RX
_________________________________________________________________________
CAMERAS THAS I USE:
RunCam Thumb Pro 4K
GoPro Hero 5 Black
GoPro Hero Session 4
Canon M50
👍Thanks for watching see you in the next one!!!
subscribed because of humility. Also great content!
Another point for us new to building and that amp draw. I didn't have this problem on the first 2 builds but #3 was doing some fluttering at low throttle and I think it was the esc being by rpm from 16 to 48 probably. And at the time I think I seen the amps creep over 100 before. Once you get those weird problems gone start your tuning and it should look like less raw noise if you're getting it flying better. But that's all if you got a Blackbox and a current sensor somewhere.
I honestly never tried to tune any quads but always wanted to try it i think it could help
I have 6s from my rc cars what beginner drone do you recommend
I started with a 5 inch after I put in some time in the SIM of course which you should too. I current fly the XL5 frame from iFlight. I love this frame over any other frames I have. Do you want to build a drone or get a bind and fly set up.
Молодець
do you have a sheller for the Matek VTX-HV 500mW or an alternative ?
not sure what your asking
❤👍
Yeah I'm fooling with this stretched x off amazon. Ain't broke it yet but was cheap enough for 2 I guess😅 lucky ididnt have a wide stack bc the standoffs are like 5mm away. Admitted I went overboard on the stack but it can go in a better frame another day. Mf skystars h7 dual gyro and 60 amp esc. A thing noobs like me easily over look is the amp rating on the 4 in one's are per motor so allegedly I'm safe up to 240 ish and have seen 71 pulled at most.
If curious the frame said USMILE XSU 220mm. Got xing pro 2306, 1700kv and emax avan flow props. Things a bullet on 6s.
Коли мені такий подаруєш😂😂😂😂😂