Looking good, lot of fabrication, I'm still trying to put a 250cc dirt bike motor on mine, been on and off it since before Christmas, 😅🤣 all the best to yous and your loved ones
I've thought about using one of those hand brake assemblies as a foot brake with a little ingenuity. Their so cheap it definitely wouldn't hurt to try.
I wonder is the Vevor easy to wipe off the metal shavings when its turned off? How much do you think it would reduce the holding power if you were to put something like construction paper down then when you turn off the magnet the filings would be on the paper. Just a thought.
I just purchased a used uh-10f hovercraft, have you ever considered building one. I am replacing the old engine with a predator 420. You have made me a believer in the predator engine.
When you need those odd size split collars you should just order a standard size it's just undersized and open them up in your lathe probably be cheaper
Love your fab videos, I study them for ideas to use in my shop , very helpful. When did you get that huge Bridgeport mill. I guess your next project will be to mill s whole kart from a single block of metal..
Okay, I gotta ask.... WHY does everyone grab the angle grinder with the cutoff wheel to cut these thin plate steel pieces? I always reach for the plasma torch and I know you got a plasma torch.
i wish i could justify ordering stuff from go power sports 😟 just can't justify $250 USD shipping for an $80 USD juggernaut😵 let alone all the other stuff i'd love to get from them 🙁
You need to come down to MO, I have a GTS 150 and run with 650cc sxs I will show you what stock shit will do I would send you a picture but it won't let me add me on your account and I will send you pictures and videos of some bad ass hills and mud holes I just got home, barley because my wheel bearing locked up and was shoting sparks the whole wheel fell of, didn't even have to take off the nut to pull it dude, thats really off roading
If cars and cameras can have a CNC plasma cutter, so can you. Half the video was you cutting parts the hard way. Could have fit much more content in the video with the plasma table.
Buggys looking Awsome looks well built
So glad you put that ebrake on the right ➡️ side
That magnet is so cool 😎
I'm so stoked for this thing I got a 440 Duromax I just need to save up for the stage 2 kit I already got the head work already done
💨 💨 💨
Always enjoy your updates.
Looking good, lot of fabrication, I'm still trying to put a 250cc dirt bike motor on mine, been on and off it since before Christmas, 😅🤣 all the best to yous and your loved ones
Nice Work Man! Love how you do things! Cannot Wait to see what a supercharged souped up 440 will do!
I was waiting for an Armageddon discovery channel randition. LOL This ride is so sick can't wait for finished product.
Its going to drift like crazy! Cant wait to see it.
That belt sander is a bad mamma jamma!
I've thought about using one of those hand brake assemblies as a foot brake with a little ingenuity. Their so cheap it definitely wouldn't hurt to try.
1:54 Whatever big guy. Next you'll tell me the earth isn't flat? lol
Great video.
Red Beard acting like that part was a giraffe or whatever got me.... 😂
I wonder is the Vevor easy to wipe off the metal shavings when its turned off? How much do you think it would reduce the holding power if you were to put something like construction paper down then when you turn off the magnet the filings would be on the paper. Just a thought.
Very cool, can't wait to see those 4 g's! 🤣
You have all the coolest tools lol
Here in under 35 crew where ya at
Under 35 what😂
Wtf been watching rbg since 19
when I subscribe to your channel you put a Sportster motor on a go-kart are we going to see that anymore?
Keep up the good work 👏
I just purchased a used uh-10f hovercraft, have you ever considered building one. I am replacing the old engine with a predator 420. You have made me a believer in the predator engine.
Why don't you get a cnc plasma table? It would make it easier and faster to make all the the tabs and brackets.
For speed....will young. The Faster the Better!!!!
Excellent job 👏 ☮️
Nice 👍👍👍👍
You souls name it the BIG HOSS
That's real noss!
Pb blaster. I put that shat on everything👍
When you need those odd size split collars you should just order a standard size it's just undersized and open them up in your lathe probably be cheaper
Love your fab videos, I study them for ideas to use in my shop , very helpful. When did you get that huge Bridgeport mill. I guess your next project will be to mill s whole kart from a single block of metal..
Na billet aluminium 😅🤣 all the best to you all
We picked it up a few weeks ago. I'm pumped to have it!
So what happened to showing us the super secret part going on the shriner cart?
One disc is good for two brake pads?
Can't wait to see the 1000cc turned up .what happened to that beast ?
It's still around 😉
How you gonna git yer feet to them pedals with all that stuff in the way? It don't look like you got any room!
I like me some soup.Do you?Soup is good. That supercharger will certainly add some to this build.(You thought I'd mis-spell that didn't you?LoL)
My cereal didn’t taste good with the PB blaster in it😂.
😂
What ever happened to the electric 4x4 golf cart you were going to put a engine in.
Okay, I gotta ask.... WHY does everyone grab the angle grinder with the cutoff wheel to cut these thin plate steel pieces? I always reach for the plasma torch and I know you got a plasma torch.
i wish i could justify ordering stuff from go power sports 😟 just can't justify $250 USD shipping for an $80 USD juggernaut😵 let alone all the other stuff i'd love to get from them 🙁
Any chance you would like a little extra help around the shop?
dude, were is your plasma cutter!
You need to come down to MO, I have a GTS 150 and run with 650cc sxs I will show you what stock shit will do I would send you a picture but it won't let me add me on your account and I will send you pictures and videos of some bad ass hills and mud holes I just got home, barley because my wheel bearing locked up and was shoting sparks the whole wheel fell of, didn't even have to take off the nut to pull it dude, thats really off roading
You mean ironwood isn’t magnetic? Bummer. ☹️
If cars and cameras can have a CNC plasma cutter, so can you. Half the video was you cutting parts the hard way. Could have fit much more content in the video with the plasma table.
Ha ha the brake plate looks like an animal cracker giraffe
Idea for a sticker. Bringing in Christ with your work. Supercharge your life with Jesus/Christ (or His name in Hebrew:Yeshua).
First