HOW TO GET YOUR KNEE DOWN! ABC of Stunting - Cornering tutorial
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- In the final part of our #PulsarMania #ABCofStunting series we teach you how to get your knee down. From the basics of cornering techniques to body positioning, hanging off, vision, and ultimately how to get the knee slider to kiss the tarmac we give you a step-by-step tutorial on how to get your knee down and corner like a champion.
Hosted by Sirish Chandran and performed by Hrishikesh Mandke on the #Pulsar #NS200 at the Bajaj Auto test track in Chakan near Pune. Shot for #FastBikesIndia
~-~~-~~~-~~-~
Don't miss Launch Control 0-300kmph run in a Ferrari 812 Superfast
• 0-300kmph in Ferrari 8...
~-~~-~~~-~~-~ - ยานยนต์และพาหนะ
Once i had both my knees down and instead going home i went to hospital and i enjoyed the corners
U mean the cornering on a wheel chair in the hosp
Which bike you were using ?
Aditya 🤣 should suit up before getting your knees down
😂😉🤣
I've been doing cornering on my RTR 200 for about 3 months now and this is pretty much how I do it!
Glad to know.
A taller riders knee will touchdown before a short riders at same lean angle. Knee down for short riders is closer to bikes/tires limits. Keep that in mind my fellow short riders. Stay focused on body position, being smooth, and most importantly having a good ride. Knee down will come naturally if anything. The low speed drills is still very good practice regardless.
Riders below 5ft take caution as the knee down lean angle can be beyond the bike/tires limits.
Goodone bro
People below 5 ft cant even ride the bike though.
Well said
Yesterday while I was riding I was thinking about how to lean the bike n here u are today with a video, thanks for the tip guys
Love you yr, great learning, much needed.
Thank u
One of the best vids of this I’ve seen. Thanks.
I lOve how you explained it with the sense of enjoyment 😊
So moral of the story is... to put knee down u have to shift your butts..☺
:D
The information you guys gave is really useful 😃
Great set of videos guys!
Subscribed! 😍
Well done guys... I've learnt my mistake now... I've been scraping pegs since long, now that I realize cheek, foot and knee positioning I guess I don't have to lean as much as I used to... 😅
Cheers!!!
It feels great to know that our videos have been helpful. If you have a video of the kneedown, mail it to us at contact@gtopublishing.com and we would be happy to share it with our fans.
How much to lean depends on size of the sidewall. Smaller the sidewall the more you can lean. Tyres with smaller sidewalls are wider and more curved towards the outer edge of tyre. Foot peg is just one factor that limits the lean angle. Sometimes you may have higher foot pegs and still not be able to lean much if you have bigger sidewall (less curved shoulder toward the outer edge of the tyres), hence running out of tyre surface to grip.
I've tried this but now my bike is in garage and I'm in hospital
Bra he's got some one or two things he's struggling to interpret or din get it or couldnt translate from the rider....like the counter steering thing he's got it wrong.
I learnt a lot from this video
Basic point is u don't steer the bike with ur knees and the not the handle bars . Handle doens't move untill u trying to get out of the corner into a straight line, that is when u counter steering.
A round profile tyres like a cone tilted side wise, when u apply force that acts in a lean angle the cone can only rotate in a circle, like wise when u lean down the bike starts moving in a circular angle. Once u are through it corner u counter steer that is puch the bike in the direction opposite to ur corner to straighten the bike
Phirse try Karo bro
YOU NEED TO KNOW thats sarcasm
Which bike you are using ?
Oombiko
Bhai yaha pr physics important hai
Eg:banking of road
It is same like bending of cyclist while taking turn😎😎😎😲
You missed use of heel plates, position of toe.
Then only you will be able to use knee recess in tank.
Thank Lot's for sharing your knowledge brother s..💚💛💜👍👌
Understandable. Very good.
You guys are growing... #Evo_India #istham
Can I perform such cornering on Yamaha fzs v3 150cc?
Appreciate ! Some learning
Will this work with a 06 ninja 250? Thanks!
i have a question is Pirelli angel Ct is good for cornering ?
What tire brand is best for cornering ns 200?
Mad mandke 💯 hrishi mandke 🤘
never do it with mrf. go for michlin Street pilot tires.
If you knee down with long legs it could prevent you from leaning your upper body further off the bike to keep the bike more upright which is more stable as the contact patch is fatter.
from which side of road we should enter the corner ?
which tyres you used here please answer @evo india
Was really helpful. Good explanation. Keep them coming.
How to get into racing.. somebody plz suggest
Nice Video.
Thank you
Can I do this on a Honda CBF600?
What is the optimum speed to do knee down and what is the minimum and maximum speeds which we can do it so that we will not slip or thrown out
i love this bike
I used pulsar ns 200 abs awesome bike
Knee guard or riding pants? Which is best?
Can I do it in my Hercules dynamite ZX?
What should be the minimum speed for that?
The last point on pegs .. even if you get position right if pegs forward set they are bound to scrape without knee touching
Vivek Singh remove them
Vivek Singh thats y there is small bolt in foot pegs
Is this doing with stock tyres?
What is the speed of knee down in turn?
Nice man
How fast does the motorcycle have to go to do this technique?
Can we do same without abs in ns200
Can we try knee down in pulsar ns200 non ABS
How do u get a dual channel abs
What should be a correct cornering speed for learner , or PRO
And what section of tyres would do good cornering which one's are available in market
You should be looking at something around 60kmph.
Which tyres did you use while cornering?
We used the stock MRF tyres that the NS 200 comes with.
Do we need to upgrade the tyre or the stock tyres are sufficient for the cornering?
The stock tyres are enough.
Rishikesh Dada no body beat you I'll bet on this
Can I do knee down on my r15 v3
Wiz sparkles are my fav.
This ns 200 has rear abs ??
Is Apache 200 gud for stunts
👌👌👌
I love Ns 200
The advice i always had in mind. Dont fight the bike the bike wobbles and stabalises fixing the geometry itself
Can I try this with Aprilia SR150 Race and TVS XL Super?
Yes, you can. But we'd recommend against it.
nice
Would love to see more quality content like this in future! :)
We are working on bringing our viewers more such content.
Is countersteering really what u mentioned?
Does tyers matter if yes what type of typers are best for leaning
Yes, they do matter. Always use the grippiest rubber available to you.
just a tip. when you lean left you have to push your right feet down a little bit in order to balance the bike when need it.
nice sir bahut achha
Thank you!
While cornoring we have to apply front brake or rear brake?????pls reply me
Only the front brake.
How much price in Hyderabad bro
Mileage
Finally I got which I always requested for but without abs is it so hard for cornering ❓❓
They put Abc not abs breaking system
Ns ❤
This rider Rishi is graceful
I love the pulser ns 200 because I also have
What's the mileage?
If you drive a bike then it is very easy to knee down also if you don't know how because for a knee down you only want best quality tires that's all you need
Which is better to do stunts in ns200 bro is it ABS or NON ABS
Both are good. However, if you want to do some hardcore stunting, the non ABS one would be better.
The Zen guy😍
its come with experience
Can you please make some video on PULSAR 200RS.
We are looking at the possibility.
Is this possible on r15 and ktm rc 200
Yes.
Which is ur rear tyre
Tvs Euro or mrf
MRF
I tried to corner in activa , but i always come in middle of road from corner of road
Maybe your start point need to shift to the other side of the road. If you start from a corner that you are trying to stay on you will end on the far side of the corner after finishing the bend.
Can we do a knee down on pulasr rs200
Yes, you can do it on the Pulsar RS200. It's riding position actually makes it easier to do so.
But how to make bike stand again
old pulsar 150 me knee down kr sakte Hai ??
Yes, you can.
Can you do this in a pulsar 135 ls?
Lester Escosura no coz it's tyres are too small
Yes, you can.
👍👍👍
How???
how to do elbow drag
can i do cornering on platina
4:29 awesome tip
Will try it.. but i am scared.. if i fall off
What is the minimum speed for maintaining a perfect corner ????
Atleast 60kmph.
can do this in apache 160 and is apache 160 is gud to race
Yes, you can.
This pulsar ns get dual channel abs...how??
No, it gets a single channel ABS.
can I do this on hornet 160R?
Yes, you can.
Can i do it on ignitor
Yes, you can.
Can we go on cornering on eurogrip tires
Yes, you can.
Noooo don't. They are not Eurogrip, they are Euroslip tyres. They're pathetic for cornering. To save your life and limb (and your ride), don't ever corner with Eurogrip tyres. Upgrade to better tyres like Michelin, Pirelli, Masseters, Metzelers etc etc.
I'm trying but my footpeg is touching the ground in CBR 150r
try not to
can I lean on my ct100?
Yes, you can.
Counter steer is not for lean angles, it's to get out of the corner, correct the motorbike into a straight line.
what I am seeing in 2:21 ..abs on rear tyre?? is it true???
😂 you lived in mars for couple of years
Single channel abs.. This is just a speed determination disk..
What if im short. Im only 5'3. Can i still get a knee down.??
Franz Michael Bastian yes you can. Body positioning is half the battle. I'm 5'5 and I got my knee down on ducati 899
ots not about neew down it the leaning with the bike
Bro im 5'1 and i get my knee down.
tan huiqi what bike do you ride? I’m a short ride also
Yes, it is all about your riding position and getting a proper line through the corner.