When you were tapping the threads for the fuel sender, I thought to myself; OHH be careful now so you dont break the tapping bit 😉 Looked like you used a drill bit a little bit too small? Otherwise a great solution using half circles on the inside of the tank 👍🏼 Looking forward to the next episode!
Hey Mate What is the length of the fuel sender for vmax? Can you give the link, please? Thanks for the useful videos ,I think you are the only one who made a video about vmax Fuel Gauge!
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
Well done - a solid solution to fitting that sensor 👍🏻
Plug welds very clever
Really looking forward to seeing this beast go back together.
Great addition to the build! 💯👌
Last time I welded a petrol tank I ended up with a metal rugby ball 💥💥💥💥
When you were tapping the threads for the fuel sender, I thought to myself; OHH be careful now so you dont break the tapping bit 😉 Looked like you used a drill bit a little bit too small? Otherwise a great solution using half circles on the inside of the tank 👍🏼 Looking forward to the next episode!
I have a set of drills that match common metric taps. I definitely used the right one! Maybe I got impatient... that's the more likely cause!
I'm wondering what length would fit properly ,i found 100/125/150/175/200MM.. great job you're performing , thank you for sharing !
This is a 250mm version! Thank you
@@ShooglyShedMotors appreciate, thank you !
What? No blooper of you dripping water on your face as you hold the tank above you head looking for leaks? 😜
Another great video ,can't wait to see it back together ,that tough paint is it any good for the engine heat resistant
Yep - I've used it on a couple of engines now with good results!
Hey Mate
What is the length of the fuel sender for vmax? Can you give the link, please?
Thanks for the useful videos ,I think you are the only one who made a video about vmax Fuel Gauge!
Metal that thin it might be better to run a vertical down
Hello
Nice Video Good Information.
But from where you got this Sensor ?
Which Type is it ? ?
Best wishes from Germany
Kai
Hello - it's a universal one from eBay. Easy to find. 250mm length 0-190ohm
out of interest Euan, have you a link for the attachment for the grinder to turn it into a chop saw please? thanks.
This one came from Aldi!
@@ShooglyShedMotors Aldi do some great deals...will have to keep my eye out. love what you're doing with a difficult project like the V-Max.
Why don't you rely on the fuel light? You haven't lived if you haven't pushed a vmax cos the fuel light don't work 😆
That doesn't sound like fun! 😰😂
your sender is too short.