How to Make Beginners RC Plane (3 Channel)
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- I have many request for releasing a simple RC plane plans for beginners, so I decided to designed one. This plane is designed specifically for beginners that still learn how to fly an RC plane and to familirized the orientation. Beginner tends to broke front propeller so I put the prop on the back. Beginners tend to have slow reflex after taking off so I made the wing with big amount of dihedral angle, about 8 degree. So the plane will autolevel by
itself. Taking off is also pretty easy just push the throttle it will take off by itself without touching elevator or rudder sticks. It also easy to build only uses 2 servos (3 channels) and very robust construction if it built right. It crashed on maiden but it can stand the test and survived.
#rcplane #diyrcplane
You can download the plans on this link below
paper-replika.c...
Please SUBSCRIBE and LIKE to support this channel
Playlist :
02:40 Plan Preparation
03:37 Fuselage
10:28 Wing
15:36 Landing Gear
19:51 Electronics
24:38 Motor and Servo Installation
34:50 Finishing Decal and CG
36:21 Maiden
39:01 2nd Flight
39:48 3rd Flight
42:28 4th Flight
43:05 5th Flight
44:53 6th Flight (Handlaunch)
46:16 7th Flight (Handlaunch)
47:47 8th Flight
48:00 9th Fllight
49:08 Review
Specs
Wingspan : 114 cm / 45 inches
Fuselage length : 98 cm / 38.6 inches
Flying weight : 812 gram / 28.6 oz
Wing Loading : 33.1 gram/dm2 / 10.8 oz/sq.ft
Wing Area : 24.5 dm2 / 380 sq.in
Wing cube loading : 6.7
CG : 6.5 cm / 2.56 inch from LE
Recommended Electronics :
Any configuration with 28, 22. motor
9 inch prop maximum without LG, with LG 8 inch and 7 inch for rough terrain (CW/CCW)
battery : 3s/4s 1500 - 4500 mah
2x servo 9 gram
ESC 30-40A
Any TX/RX as long it's hobby grade
Electronic for testing :
motor Turnigy DST 1200kv
ESC 50A
prop CW 7x3.5x3
Battery Lipo 3S 2200mah & Li-ion 3S 3000mah (LG HG2)
2 x 9 gram plastic servo
TX/RX Turnigy 9X + FRsky DJT
Materials :
6 mm Depron (no paper skin)
3 mm plywood
7 x hot glue sticks
White packing tape
Bicycle wheel spoke wire / piano wire (2.5 mm)
Nylon thread
CA glue
3x 40 cm (1.5 mm) pushrod
velcro
bamboo chopsticks
6 rubber bands
3 x horns
Thank you for all your gorgeous instructions and contagious energy for rc - You show how to build great planes on å budget and inspire a lot of people.
thank you, I'm glad my video can be helpful
th-cam.com/video/cjGAGiwOr0w/w-d-xo.html
ini yang rapi dan full ligthing
@JuliusPerdana how hard for a beginner to build a 1/3 or 1/4 scale model of this plane using insulation foam
Sir, You are a blessing to this hobby that gives motivation, to give it a go! Thank you!
Have looked at many starter planes and decided what you have said and the whole set up of this model it is the one I am going with..Great explanation of why and why nots ! Thank you very much….
Ur building technique and ur model are amazing and aslo effort to help this hobby and sharing free plans is awesome 😍😍 👌😊😊
Thank you, comments like this always give me motivation.
This model airplane is wonderful. Amazing again, great job. Thank you so much for sharing your work with us.
Thank you for for the subtitles JP. They are a great help. In your other videos I had no idea what you were doing.
start from 2020 I use English, still with Eng subtitle
awesome! I love it... I think also It would be a really good fpv plane , V tail and ailerons and you can do nice belly landings as well...
Awesome looking beginner plane!
That’s great it looks different from others
Thanks for your great channel!
thanks :)
Your channel is excellent work, every model is a piece of art.
Thank you so much 😀
This plane is awesome! Love it! I've used the dynam hawksky wings, an expensive plane which never flew correctly and, of course, and up with a crush. All I can say is FANTASTIC! 2216S/1400kv Volantex motor, 30amp Volantex ESC, 2200mah,then 2800mah, then 3000mah 4cells, then 2800mah 3cells, with no problems, just the landing gear, now reinforced. With a BGL FC, with RTH, cam and video transmitter make this plane one of the best FPV platform I have ever flew. So, highly recommended. Thank you again, Sir, for sharing the plans and all the best!
thanks for review Marius
Welcome!
Greetings,
Wow.. Beautiful. Nice.
Keep it up.
It's my 30th year of RC.
Thanks admin.
Thanks all
wow congratulations my friend, 30 years of fun and joy
Thank You Julius ! I enjoyed your video and your idea . You help this hobby stay alive ! It was easy to follow not speaking your language .
Do you know I have english subtitle? lol yeah you can turn it on. Btw thank you thank you
@@JuliusPerdana Subtitle was perfect . It was interesting to read it and listen to you and the speed was good . Thanks again
Udah buat cesna 172 pertama nyoba crash akhirnya bikin bango 1, mudah2an cepet selsai bisa latihan terbang.trimakasih om julius
Amazing. Near-indestructible air frame and extremely stable flight characteristics. Your plane appears well-balanced, perfectly weighted with robust landing gear. The personal engineering you poured into it and was able to show in this video is credible. Bravo!
Thx bgt om tutorialnya, kebanyakan pada bikin glider untuk pemula
komplit banget Om Julius , detail saat maiden dan koreksinya juga dijelaskan dgn baik. Mantap , terima kasih plan & video tutorialnya Om 👍👍👍👍👍
trims om, sama2
Didn't understand anything but your videos are on the next level, your awesome man thanks for posting!
you can always turn on the subtitle in English
btw thank you for your appreciation, cheers Julius
Love your work mate. Greetings from 🇦🇺
Thank you very much, Sir! Great plane! I think I will start building tomorrow. I forgot that I have ordered some time ago, from HK, a box of depron and I am tired buying, trying different expensive planes. I will try to print it a bit bigger and make it a nice and inexpensive platform for FPV. All the best and happy flights!
I think the same to put FPV in there, thanks
@@JuliusPerdana I think it will be great. I was trying to make it little bigger on the computer, but it takes time. Anyway, I have a lot of unused smaller battery so, I'll give it a head as it is. All the best!
Hi Julius. I made a Bango for myself using your plans thank you. I have yet to fly it but I will soon hopefully.
you are welcome Michael, you know what, your name "Stork" is Bango in Indonesian :D
awesome channel and ive got to say this is a well thought out plane very impressed
thanks man
You are super generous sharing your talent! Thanks.
you are welcome
lo he visto mucho y no me canso de verlo, se convirtió en mi favorito y lo haré, gracias maestro.
you are welcome
Very good, I liked it a lot.
I already have the plywood cut.
I have the bango in stanby.
amigo vc é muito fera muito show seus vídeos parabéns por disponibilizar os planos e ajudar a nós amantes de aeromodelismo parabéns !
obrigado por seu apoio meu amigo
Cakep bin keren pake bingit Om Julius. Sukses selalu, koq tahu yah pemula suka jatuh jatuh hehehe
Nice and simple. Excellent work. Have no words to appreciate your efforts. Keep up the good work. 🖒🖒🖒
thank you, will do
Looks cool, but I suspect it is very prone to prop strike during take-off and especially landing with flare, or you have to land hot by flying the plane literally onto the ground. The solution will be using TE flaps for take-off and landings with the nose pointing down.
the tips is when taking off don't touch the elevator, let it airborne by itself you won't have prop strike, and cut throttle for landing
Hi, Julius, thank you very much
Que excelentes que están todos tus videos y gracias por colgar paso a paso todo lo que hay que hacer eso es de mucha ayuda
de nada mi amigo
Hi Sir I love your work and videos
My request is plz do make a video In which you are converting a toy glider into a rc 4ch airplane coz they are super durable and bigenners can practice on them
izin sedot ya om planya,,,mksh atas tutorialnya,,sy sdh selesai membuat dan maiden tp beberapa x mengalami sayap patah terus,,maklum pemula om
Om julius, bango 1 ini klo pake motor 2212 prop 8x6 2 blade.
Take off nya enak ga klo di lapangan tanah rumput?
You are unique.you inspired me a lot.
Ini Pak Julius yg pada thn 1997 sering ke Pak Imo Bogor (almarhum) dan maen aeromodelling di Halim bukan ya....,punya anak buah namanya Pak Is...sorry klo salah,rasa2 inget ke zaman dulu....
Siippp.... Bener joo. Ditunggu kelanjutan ATR nya Pak....
sip lagi dikerjain nih, minggu rilis part 2
Pretty smart lookin build! I’m far from the need of a trainer, but this plane looks so good, I may build one as a sunday flyer!
thank you, it also good for FPV
Jelas bngt ngasih taunya....mksh om....semoga tambah sukses....
siap terima kasih
Terimakasih bro Yulius sharing plans nya.
Saya sudah down load dan coba buat pesawat trainernya.
Tinggal tunggu componen dikit lagi, baru coba terbang.
Salam Sukses dan maju terus dgn karyamu.
Thanks.
sama2 masbro
sir cant't we use 5MM Depron? please reply.....
GOOD CREATION......
any foam will do
Is this the simplest beginner RC plane in terms of time taken, ease of availability of materials and technical skill required ?
mantul pokok nya. semua system nya di jelasin dario nol. kebetulan saya suka lupa
hahaha, buat yang baru mau belajar aja
saya juga masi belajar. asikkkk deh
Betul banget om punya saya motornya patah 2 kali,kalo Tk Of kok g bs lurus jlnya penyebabnya apa om??
Om apakah bisa pakek polyfoam yg 1CM???
keberatan nanti, 5mm aja. Atau bisa badannya aja
Cool design. I think great for FPV flying.
Excellent.
Saludos desde Buenos Aires Argentina.
👍😎
Ngomong apasih
Jembut...demos xo axilo
mantep om,,,, sukses terus,,,
hari ini niat nya mau bikin glider mini buat maenan anak saya,, pas cari2 how to make glider eh nyangkut di video ini,,,
abis liat video ini jadi pngn bikin maenan buat saya sendiri,, wkwkwk
hahaha siap
Hello Julius, testing the Bango, the plane does not take flight, the CG is 6.5cm from the leading edge, and it is balanced with the nose slightly forward. It has a 1400Kv A2212 10T motor, 2500mah 3s battery and two 9g servos and 8045 propeller, with the same configuration of the plane that you built ... Julius help, what could it be?
having the same issue , did u find any solution to the same issue?
If we put 10 inch prop but make landing gear long then it can take off well ?
Maaf om tnya lagi
Itu remot controlnya belinya gmn?
Udah sekalian sensornya?pa gmn om
Muy buenos videos y planos.
Vas directamente a la exposición del trabajo.
He descargado el plano y voy a intentar hacerlo, es mi primer aeroplano de radio control y me a gustado mucho.
Que motor me recomienda, no me decido el de 28 o el de 22.
Muchas gracias desde España.
Very good videos and plans.
You go directly to the exhibition of work.
I have downloaded the plan and I am going to try to do it, it is my first radio controlled airplane and I really liked it.
Which engine do you recommend, I can't decide on the 28 or the 22.
Thank you very much from Spain.
28 is the same as 22, because 28 is diameter of the casing and 22 is the stator, they usually different brands
Thank you so much.
Sir can i use two blad 10inch proppelers in this bango plane?...
Sir i am waiting for your reply.....overall this Plane is sooo beautiful for beginners!... 😍😍
You can but you have to handlaunch the plane
Oh iya om itu foamnya kok padat jenisnya apa namanya,...yg hard y om sy msh pemula..
Mantap banget bos... jadi pingin bikin 😂😂😂
Siaaapppp hadir unt menonton. Dan ikut jiplak plan dari om Julius. 😁👌
trims komennya, sip
Mantaaaaaaaap Surantaaaaaaaap Pak... Sukses Selalu. Mantaaaaaaaap Bangeeeeet Panduan nyaaa...
Mudah dn Gampang yaaa Ternyata... Tinggal ada Duit , Jadiii deeeech
terima kasih sudah mampir dan nyimak
Om @juliusperdana, kenapa roda depan tidak di pasang steering system?
Padahal untuk take off di runway aspal lumayan diperlukan, karena sering belok sendiri si pesawat
ga perlu terlalu ribet utk pemula, kalo belok tinggal di lurusin rodanya
Sir
Can we use anything instead of heat gun to bend the foam 🤔
BTW your projects are out of this world, keep it up 😀😃🙂
Please try to make a DC 8
arah putaran motornya kemana boss kalau dilihat dari depan.....mksh boss...
Can we make a body of Boeing 777 and fix the motor behind it like this aircraft
please tell me a website which we can buy all these components for the bigginers plane
Can I use 1400 kv brushless motor with 40. A esc and 2200 mah 4s. Battery
With 9 inch prop
Please please guide me personally with motors ,esc and battery I failed once in making phantom 4 .I am too much dishearted . please help me making this one
Je viens de construire, je n'arrive pas à le faire voler j'ai un problème de réglage du moteur anti couple
Bang mau tanya,,kalau mau desain sayap seperti itu,,itu menggunakan airfoil model apa,alasanya kenapa? Thanks
itu yang buat setrika lakban namanya apa om?
Gara gara liat video ini... 100%saya jadi pingin buat. Insallah saya mau memcoba menbuat..
mantab, model yang pas buat mulai terjun di hobi ini. Gampang dikendaliin
Maaf pak saya mau bertanya
Di situ kan tertuli motor /dinamo 1200kv
Apa bisa di ganti dengan 2200kv dengan esc 40A (sudah terlanjur beli) mohon masukannya🙏
bisa itu enaknya Bango, bisa fleksible motornya, pake prop 6x4
Hola Julius, saludos desde Venezuela, felicitaciones por tu canal, una pregunta se puede construir con depron de 3mm?
Om kalo beli Depron di mana nyah..?
kalo saya di ciputat, di kampung melayu juga ada, paling gampang lewat tokopedia
Great videos but please show us how to make a twin engine DH Caribou.
Sangat edukative pak....trimakasih....
sama sama, terima kasih juga komennya
om jul klo minta di bikinin tanpa rx dan tx kira2 berapa ya om
cantik dan stabil pesawatnya boss ku,salam dr malaysia
terima kasih kawanku, salam dari Indonesia
Can I use 1045inch propeller?
Hello, I have a problem. When the radio is turned off, the brushless mator its own don't off .Can you tell me what is the solution?
Radio on first , then plug in the battery . After flight : unplug battery , then turn radio off .
Mantulll om,,,,👍,,,ditunggu lanjutan ATR nya om,,,
siap
about what is the total cost for this build including electronics and controler?
Ini kalau pakai motor dst 1000kv gimana om efeknya..
Om maaf saya masih pemula mau tanya. Kira2 lebih baik saya pakai remot merk apa ya? Tp saya mau sekalian yg pro remotnya biar gak beli2 lagi. Kalau ada recoment tokonya om. Trimakasih om julius🙏🙏
kalo sekedar nyoba bisa beli Flysky Fs-i6, tapi kalo mau langsung bisa pake FrSky Taranis, Jumper T16. Jangan kuatir remote gampang dijual lagi ke komunitas aeromodelling
@@JuliusPerdana ashiap om, ini lagi nyari2 barangnya om di OL. Tapi lumayan yak harganya..🤭🤭
Brother I also made this rc plane....I have used1400kv brushless motor on this plane and the tail of this plane become very heavy that is why I can't fly this plane properly. I also changes the lipo battery in various position in order to make the nose heavy but I failed. So please tell me how I can solve the problem....😥😥...
add weight ballast on the nose
Mas. Saya kurang paham yang bagian pasang engsel elevator dan rudder. Itu pake engsel apa ya?
lakban bening aja
Om mau tanya kalo pesawat bango dikasih elekrik drone bisa enggak
bisa asal drone gede macam Phantom
@@JuliusPerdana ok makasih om
Bro. lovely making video. bro. what is the weight of this plane.......?
Check description
WOW Excellent !!!!!
thanks
Mas Julius, boleh minta divedioin, jika saat mau menerbangkan, gerakan jempol di remot diperlihatkan juga ya, agar bisa dilihat dan dicontoh juga, sering sekali pemula sepertti saya, untuk menerbangkan sudah crash terlebih dulu, tanpa belum menikmati indahnya terbang di udara.
Hi Julius, I tried your piper Cherokee....you did not specify the angle of propeller you mounted
it doesn't need one, because the firewall already angled down and right
@@JuliusPerdana okay, thanks for the reply. And it seem you speak Indonesian language. Your name doesn't sound like a Mohammedan....strange.
Your name sounds more like a Filipino.
Take care nd have a nice day...
Paling demen deh & cenal ini
makasih
Pak.....lemnya pake lem apa? Dan jenis styrofom nya yg gmna pak....? Mksih sblmnya
saya pake lem panas
polyfoam 5 mm
Hola Julius, efectivamente mi Bango ya despega, el cambio de la hélice funcionó, pero cuando deja tierra se va a la derecha y se clava de punta... Que podrá ser?
there are many answers, maybe because of the side wind, or your wing is not quite symmetrical, the right wingtip is higher than the left, your fin tilted a bit to the right. Try to trim the rudder to left until it wont bank to the right. Also make sure the motor is straight.
@@JuliusPerdana Ok, Julius veo en mi Bango que uno de los elevadores, especificamente el del lado izquierdo viendo el avión de atrás quedó como muy separado del resto del cuerpo del elevador, podrá ser eso motivo también de la falla?
om itu pasang motornya sejajar atau ada miring2nya spt kalau motor di depan ga?
lurus aja
baik terima kasih om 🙏
Om mau tanya. Kalo elevatornya saya gabungkan. Tanpa jadi dua ada efek samping gan. Maksudnya biar bikin kawat pushrod elevatornya satu aja.
bisa begitu, ga ada efeknya malah lebih bagus, asal sambungannya kaku aja jadi gerakan elevator bisa seragam ga letoy salah satunya
Ok terimakasih om. Ilmu dan waktunya
Misi om mau tanya ni , mohon maaf pertanyaan nya agak menyimpang dari video om.. jadi gini om saya mau beli remote FS I6 tapi saya bingung untuk memilih receiver bagus yg FS-IA6B atau FS-IA6 , mohon untuk pilihan terbaik ya om . Terimakasih sebelum nya😁🙏🏻🙏🏻🙏🏻
pilih yang B, lebih bagus
Siap makasih om🙏🏻🙏🏻
hello good job, I expect a version 2.0 with ailerons, can lift more weight for long range fpv and how much is the maximum step that this model can lift in flight with battery
Ok version 2 will be on the drawing board, I try using 3S 5200mah it still can fly good.
@@JuliusPerdana is it possible add ailerons on the wing for this plane or it needs a new type of wing? If yes do you have any recommendations for that?
By the way thank you so much for your videos
you can use Cessna 172 wing, I had it fly with it. It flys great
@@JuliusPerdana i will try, thanks
Video selanjut nya bikin pesawat rc yang bisa masuk kedalam tas.kayak bongkar pasang gitu. Jadi bisa dibawa kemana mana om?
siap, saya tampung ide bagusnya.
Next bikin glider om.. yang simpel2 aja
abis ATR jet lagi, tapi jangan kuatir pasti diselingi yang simple juga
Mantap omm ...di tunggu video selanjut nya
siap, trims komennya
di aspal mulus. mantul bingit.
bener enak kalo rata lapangannya
mumpung jalan tol baru jadi .dan lapangan jauh . itu juga udah enak
Manteb bro...saya suka channel2 RC Plane seperti ini....jd saya subcribe deh....tolong dong bro bikin konten tutorial pesawat Mustang versi perang dunia 1945
siap
Ok...👍👍👍beautiful...
thanks
Om Julius kalau sy pakai engine nitro Novarosi bisa jg kan ya..
itu berapa cc sih? ya blom pernah tau
@@JuliusPerdana LONG STROKE 3.5cc Type S21 WCS09