How to Replace Front Shock 2003-2008 Toyota Corolla

Buy Now!
New Strut Assembly from 1AAuto.com 1aau.to/ib/1AST...
This video shows you how to install a front shock on your 2003-2008 Toyota Corolla. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 19mm Wrench 1aau.to/oSg/1AX...
• 12mm Socket 1aau.to/obji/1A...
• 14mm Socket 1aau.to/obji/1A...
• 17mm Socket 1aau.to/obji/1A...
• 19mm Socket 1aau.to/oaa8/1A...
• 21mm Socket 1aau.to/oaa8/1A...
• Strut Spring Compression Tool
• 1/2 Inch Impact Gun 1aau.to/oqP/1AX...
• 3/8 Inch Impact Gun
• Socket Extensions 1aau.to/obji/1A...
• Torque Wrench 1aau.to/oaxj/1A...
• Gloves 1aau.to/oRn/1AX...
• Safety Glasses 1aau.to/oJG/1AX...
• Floor Jack 1aau.to/oXA/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@pierre-yveslavigne9688]

Coil and top plate change color at the installation 😂

[@jabitjabit6680]

how about marking alignments?

[@nwbee4692]

How do you know when to change the springs? it seems easier, I have a 07 corolla with 164, plus with OEM

[@anandchundi6805]

no boot? Waste of time, just going to get contaminated and fail. If you're doing this job you should have a new boot and stuff at least

[@RickBerg-b9k]

Definitely a rust belt car