Thanks my dude. Most of the time I don’t have enough time to put a ton of effort into it cause I’m doing it last minute. but I spent a whole Saturday doing this one. 👌
Pro tip: when you're doing your CAD anytime you are doing a small enough piece that you could use a cereal box, It works much better than corrugated paper. It is much more precise and easier to cut.
Oh I use that kind of cardboard all the time. For this application I kind of wanted it to be able to stand up and hold it shape a little better which is why I went with the corrugated. If you watch my channel long enough you’ll see plenty of examples of both. I’ve even made gaskets out of cereal box lol
I dunno Dan. Wonder if it's strong enough? Maybe you should have gone with 9/16 instead of 1/2 inch stock. 😱🤣🤣 Nice work/video! Less than 2 months to Moab. 🤗
I used what I had lol. I ran out of 3/8”. Moab is looking very slim for me between not having PTO and being a long way away from having this axle installed and working
I know the feeling about the stray sparks burning the house down, i stop all hot work 45-60 min before im ready to go in for the night just so I can be sure nothing catches fire. It sucks when you have to find little things to do that dont involve plas, grinder or welder.
Yeah I always do that too, even that night. My girlfriend’s dad lost his 2 story shop with an upper apartment. Welded and a spark must have got in the wall. It’s even worse being an attached garage cause I’d lose my house too
@FlawedOffroad same boat the garage is right against my kiddos rooms I have zero room for error on fire watch. I also blanket things that are likely to catch and then move the blanket after. Paranoid I know but it's worth the effort.
Great video. Editing is on point for sure! I’ve had pretty good luck with my Eastwood plasma. Does leave some slag sometimes but the quality of the cut is usually related to how steady my hand is.
4.7 4.7 out of 5 stars 857 Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life Metal cutting blade for circular saw 23:37
Do those run at the same RPM as a standard circular saw or do you have to buy the special evolution saw for slower rpm? I have the evolution chopsaw which is very nice.
the 44 has duragrip still. but its staying in there for when I sell the whole axle. heck just buy the axles, my front and my spare matching 60 rear both 5.13 lol@@jeepindave5464
This is the Yeswelder Plasma cutter I used: bit.ly/Cut55DSPRO
This is how you save 10% on it: code- Flawedoffroad
My Yeswelder cut 55ds died after very little use. Hopefully their pro model works better for you. Thanks for the video!
Haha Dan the muh fuh man. Preciate the content and your time.Enjoy watching you solutionize and your yj love!
Got leaf springs on all my wheelers and trucks 😉
Nice job glad you got it done
That axle “ain’t goin (to bend) nowhere!!” Lookin good.
Thanks!
I’d hope not!
Wow your editing skills are on fire! I’ve noticed a significant improvement in your videos. Keep up the great work!
Thanks my dude. Most of the time I don’t have enough time to put a ton of effort into it cause I’m doing it last minute. but I spent a whole Saturday doing this one. 👌
Pro tip: when you're doing your CAD anytime you are doing a small enough piece that you could use a cereal box, It works much better than corrugated paper. It is much more precise and easier to cut.
Oh I use that kind of cardboard all the time. For this application I kind of wanted it to be able to stand up and hold it shape a little better which is why I went with the corrugated. If you watch my channel long enough you’ll see plenty of examples of both. I’ve even made gaskets out of cereal box lol
It's good to see some progress on the old 60. My barnes truss finally showed up today for mine. Yes... I'm cheating. 😁
Dude if I could buy a truss that didn’t cover the leaf perch…..I would have lol.
@@FlawedOffroad right. As you said, no one cares about you leaf spring guys any more. 🤣😂
Stay strong leaf brother!
Keep it up Dan!!!
I try. So much going on right now it’s difficult to make solid progress. Wish I could have time off my main job so I have time to do my second job😅
I'd definitely fully weld it. I've welded several trusses to axles and did gears after and have never seen any issues when I set up the gears.
Yep I did, I kind of stitched half of it then a few mins later filled in the rest lol. It worked out. When you gonna post another vidya?
I dunno Dan. Wonder if it's strong enough? Maybe you should have gone with 9/16 instead of 1/2 inch stock. 😱🤣🤣 Nice work/video! Less than 2 months to Moab. 🤗
I used what I had lol. I ran out of 3/8”.
Moab is looking very slim for me between not having PTO and being a long way away from having this axle installed and working
I know the feeling about the stray sparks burning the house down, i stop all hot work 45-60 min before im ready to go in for the night just so I can be sure nothing catches fire. It sucks when you have to find little things to do that dont involve plas, grinder or welder.
Yeah I always do that too, even that night. My girlfriend’s dad lost his 2 story shop with an upper apartment. Welded and a spark must have got in the wall. It’s even worse being an attached garage cause I’d lose my house too
@FlawedOffroad same boat the garage is right against my kiddos rooms I have zero room for error on fire watch. I also blanket things that are likely to catch and then move the blanket after. Paranoid I know but it's worth the effort.
Hi, my name is Nanan and I am a member of the procrastination society. I have made zero progress on my 1 ton swap on my YJ in over 8 months...
HI NANAN!! Thank you for sharing your story today that was very brave
Great video.
Editing is on point for sure!
I’ve had pretty good luck with my Eastwood plasma. Does leave some slag sometimes but the quality of the cut is usually related to how steady my hand is.
Thanks man. On these longer videos I have to add a little bit of razzle dazzle lol
You're a member of Procrastinators too? Probably would've known that if I ever went to the meetings, but I always figured I would go next month.
Haha you win 🥇
4.7 4.7 out of 5 stars 857
Diablo D0748CF STEEL DEMON 7 1/4 inch 48 Teeth Metal and Stainless Steel cutting Saw Blade CERMET II Carbide Up to 5X Longer Life
Metal cutting blade for circular saw
23:37
Do those run at the same RPM as a standard circular saw or do you have to buy the special evolution saw for slower rpm? I have the evolution chopsaw which is very nice.
@@FlawedOffroad run at full speed of circular saw. I have the evolution 9in metal saw, runs bid slower. Cut My . 750 in weld table like butter
Sell me that 44 front locker 😂
its a 60
@@FlawedOffroad you're rocking a 44 currently or you still got that duragrip?
@@FlawedOffroadjust saw the ending trying to sell the 60 locker. Opps
the 44 has duragrip still. but its staying in there for when I sell the whole axle. heck just buy the axles, my front and my spare matching 60 rear both 5.13 lol@@jeepindave5464