What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
Getting a fiesta st next week. It has 16" Koenigs on it with 205/40r16s. The tires look too small so after some forum searching, I ordered some 205/50r16s...hope I didn't go too big but I saw some pics of the 205/50s that I really like so 🤞
2:30 That looks a little high at the front, and the rear looks a little lower. I thought these cars come with a slight rake (lower at the front, and it's not uncommon for cars with a torsion rear end to be higher at the rear). Mine is stock and has a noticeably smaller front wheel gap, but probably bigger gap at the rear. Not sure if there's a difference between the 5dr and 3dr regarding this.
My old fiesta runs on 17” 7.5 40 Chrome JR9’s with 205/45/VR17. I had some rubbing issues so I cut out a small opening on top of the wheel arch and added a down pipe from there to the front of the car to the lower lights which I then turned into a CAT eye to add more downforce. The rear wheels had a cut out from the side skirt adding downforce to the bottom of the tire around the top circumference and shot out the back near the exhaust
I'm looking at Bola CSRs 8inch width for my fiesta st-3 mk7.5 but wondering whether to get 35mm offset or 45mm offset as unsure what fitment will be like? anyone have any idea?
I'm having some trouble finding exactly what I'm looking for. I have a 14 fiesta st and I'm looking at putting it on bags and widebodying it. I've been hunting for some clean 3 piece wheels that are 8 inches wide but I haven't really found any 3 piece wheels. I'm wanting something with a 5 spoke design like the tarmac's but 3 piece. Was wondering if anyone has some suggestions. I'm going for a showcar build so weight doesn't matter much.
My fiesta 1.0 ecoboost just change to bilstein b6 and H&R spring…..tyre size 17x7*40…but when bounce my fender touch the tyre…may i have any opinion???
@@fitmentindustriesgarage5583 Yeah thay look nice :) Matt black on a white car looks nice. Dont stick out to much. Only problem is the back brake disc has quite a large hub so its bigger than the wheel hub. Thay need a matt black paint job too.
Fitment Industries Garage already bought some! Would of went through you guys but the exchange rate and shipping sucks :/ but I did use you guys to see options and look at the photo gallery
ive got the 18 se 5spd hatch.. i hate how there is VERY little to options for this car as far as aftermarket... surprisingly though this car believe it or not isnt that bad in the canyons ! despite the horrible gear ratios and lack of any sort of "oomf" from the lil 1.5 n/a ...
@@guenthersteiner8163 They are legal but they need to certified by the TÜV. Otherwise you are not allowed to mount them and get a fine if the police notices that they dont the have the necessary documents.
Video should be called "Compilation of Fiesta STs... with rims" 'on lowering springs?'... 'on air suspension'? How about some real info about the cars you're flashing pictures of Basically zero useful information
What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a
comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq
Fiesta ST in white with black rims looks so damn good
dekagrams w a meaty tire is the way. performance and more comfort
I agree. They look great and are still practical for daily driving
Getting a fiesta st next week. It has 16" Koenigs on it with 205/40r16s. The tires look too small so after some forum searching, I ordered some 205/50r16s...hope I didn't go too big but I saw some pics of the 205/50s that I really like so 🤞
Would've been good to see suggestions for performance / track set ups.
Slammed mine into the wall, can confirm.
@Mr 3xclamtion yessir. Probably the biggest irritation I have about some Ford hatch owners is their misuse of this awesome drivers platform.
i dont think t
his channel knows much about that
2:30 That looks a little high at the front, and the rear looks a little lower. I thought these cars come with a slight rake (lower at the front, and it's not uncommon for cars with a torsion rear end to be higher at the rear). Mine is stock and has a noticeably smaller front wheel gap, but probably bigger gap at the rear. Not sure if there's a difference between the 5dr and 3dr regarding this.
My old fiesta runs on 17” 7.5 40 Chrome JR9’s with 205/45/VR17. I had some rubbing issues so I cut out a small opening on top of the wheel arch and added a down pipe from there to the front of the car to the lower lights which I then turned into a CAT eye to add more downforce. The rear wheels had a cut out from the side skirt adding downforce to the bottom of the tire around the top circumference and shot out the back near the exhaust
Can you do the same thing with a se?
I run genuine cosworth alloys on mine, can't beat old school Ford 🤙
Agree. I have mustang 10 holes 15x7 +25 wrapped in 205/50R15 on my SE and it's perfect.
This helped me tough thankyou
I'm looking at Bola CSRs 8inch width for my fiesta st-3 mk7.5 but wondering whether to get 35mm offset or 45mm offset as unsure what fitment will be like? anyone have any idea?
What workmeisters are this... I want them for my st
I'm having some trouble finding exactly what I'm looking for. I have a 14 fiesta st and I'm looking at putting it on bags and widebodying it. I've been hunting for some clean 3 piece wheels that are 8 inches wide but I haven't really found any 3 piece wheels. I'm wanting something with a 5 spoke design like the tarmac's but 3 piece. Was wondering if anyone has some suggestions. I'm going for a showcar build so weight doesn't matter much.
Great to see the e30 is still alive.🤘🏽
This help a lot
What about 18s” say 18”x7.5 “ et 38
Thank you so much 😊
My fiesta 1.0 ecoboost just change to bilstein b6 and H&R spring…..tyre size 17x7*40…but when bounce my fender touch the tyre…may i have any opinion???
can anyone help me i want to put 18s on my mk6 fezz but i dont no anything about wheels
anyone know if 15x8 with 0 offset on 205/55/15 will poke or sit flush looking to im only able to find 15 with 0 offset in the 4*108 pattern
I was hoping to Run the Mk8 ST wheels on my MK7.5 but looks like there's no chance of getting 18' to run
It's possible. 215/35zr18. Still trying to find some OEM mk1 focus rs OZs
I have 18 215 fits nice
Do rota grid v with a 16x9 with a et0 fit cuz I’ve been wanting to fit the titanium chrome ones on my fiesta🪅
Where was this before I bought my wheels
I got a set of OZ Racing Formula HLT 4F.
Those probably look sick! 🔥
@@fitmentindustriesgarage5583 Yeah thay look nice :) Matt black on a white car looks nice. Dont stick out to much. Only problem is the back brake disc has quite a large hub so its bigger than the wheel hub. Thay need a matt black paint job too.
I'm running the factory 17 on eibach lowering springs with no rubbing and no fender roll. No clue what factory width/offset is though.
OEM is 17x7 ET47.5
Same here
Anyone know a good place in Calgary Alberta or a good Canadian wheel site
We can ship anywhere!
Fitment Industries Garage already bought some! Would of went through you guys but the exchange rate and shipping sucks :/ but I did use you guys to see options and look at the photo gallery
ive got the 18 se 5spd hatch.. i hate how there is VERY little to options for this car as far as aftermarket...
surprisingly though this car believe it or not isnt that bad in the canyons !
despite the horrible gear ratios and lack of any sort of "oomf" from the lil 1.5 n/a ...
VMS have 15x8 and they go for 160 each...
None of them are legal in Germany^^ Just funny.
Aftermarket wheels are illegal in Germany?
Why are they not legal?
@@guenthersteiner8163 They are legal but they need to certified by the TÜV. Otherwise you are not allowed to mount them and get a fine if the police notices that they dont the have the necessary documents.
@@tqatkins look at the other comment of mine they need to be tüv certified.
these are all so boring... the only thing i hate about my fiSt is the shitty wheel selection
gj
fiesta SE gang😔😔
Video should be called "Compilation of Fiesta STs... with rims"
'on lowering springs?'... 'on air suspension'? How about some real info about the cars you're flashing pictures of
Basically zero useful information
Also that dude clearly isn't smoking the same ice as the usual tweaking ass presenter... so plus one for that!
?
Can we talk about fucking Mk8? Its 2020
mk8 was never launched in america and thats where they are based
@@Prawnleem Tru
Mines on 9.0 x 16 sooooo mines more aggressive 😂