Have the same F-250 truck the bradded wire is ground shield that in this case you don't connect. The only one you connect is the Purple is positive and the White is negative ground. Wish you went a little slower when sliced the RCA to the harness to we can see how that's done. Thanks great Video man!!!
Great video Guys. I'm planning on rerouting the mirror feed on my 2010 F150 to my after market head unit. Wondering if you know the colors of the video feed wires on my vehicle?
I have a 2012 avalanche and how do i move the backup camera from rearview mirror to the dash screen? Are there any settings thru the one currently in dash? Thanks
Can it still be moved to the radio because I added a 3rd brake light with a camera. So I want the rev camera and 3rd brake light both be displayed on the new radio screen
Same here except I have a 2012 Ford f-150. I have watched just about everything on TH-cam because I can’t get my camera to display on my pioneer touch screen and my mirror camera has the blue screen of death ☠️
So I have a question about my 2008 toyota sequoia. I want to install a factory camera to a aftermarket stereo. I noticed one day when looking at where the camera would be placed in the rear I saw that it already is prewired in the event if I wanted to install a camera later on. The wire runs through the headliner towards the rear view mirror. I guess what I want to know is from the pre existing wiring should I only require to solder on a RCA male connection onto the pre exisitng rca wires? or do I also need to do something with a reverse wire? If i need to do something with the reverse wire what should it connect to or how would I go about integrating towards the camera working. I also noted in your video that you used a 12 volt converter to 6 volt would I need that? Please Reply...Thanks
What about an aftermarket touch screen mirror. I bought a mirror that is a dash cam and has a reverse camera function also. I want to use my existing backup camera that is fed to the old stock mirror. 2012 Silverado 2500hd. The new mirror input is a 3.5 mm jack plug with 4 wires. I can test which wire is what. TOGUARD Backup Camera 10" amazon.
Do you have specs about the 2011 Subaru Outback with this same issue? I'm purchasing a Kenwood Excellon with the Maestro Data link to connect it to the car's computer. THe camera seems to be separate based on this video. The work doesn't seem to be super hard. Our local car stereo place said that the picture would be REALLY bad (like 360p on youtube bad) BUT, the functionality would be nice. Any thoughts or suggestions.
what year of f150 where you doing that on I have a 2011 f150 and just looking to replacing my truck with a kenwood deck. Also what is better the kenwood mic. or the oem mic and if the oem mic is better can i make that mic work with the kenwood deck. or does it have to run with sync. using the maestro RR. cause i want the oem mic to work with android auto using google assitant
I tapped into the wires down by the parking brake 2011 f150 reverse camera in mirror (white/green center positive) (brown/purple shield negative) ... What im noticing is on the pioneer avh-2330nex is a blurry image ... Any insight as to why this is happening ... To thin video cable or just a low resolution camera ? Maybe combination of both ... Have you had this issue ... I choose the foot location due to less invasive and shorter wire run ...
Could be because you split the line. 75 ohm 1v peak to peak is analog composite video. May need better cable or a distribution amplifier to boost/split the signal and maintain 1vP-P.. broadcast TV engineer..🤔🤷♂️
That is most likely the case as when i unplugged the rear view mirror signal from back of mirror it cleared up on the radio significantly ... Adding a booster / splitter is not an option .. due to not caring enough about it ... Its tolerable and clear enough ... Thx for input tho ...
Thank you for this, because this is what I need to do just got a dash cam mirror which also has backup camera and ATOTO A6 which can show my backup I knew it could be done but did not know how... Again thanks.. from the new guy
Can you parallel, or split, the signal so that the image remains in both the mirror and the head unit? Planning to upgrade the deck in my 2012 Chevrolet Silverado 1500 LT.
Brandon B, I watched another video like this and the guys reverse image was on the mirror and the radio screen at the same time. It should remain on both, no splitting or anything required
Red Slayer Do you know which method he used to show the OEM camera on the head unit display? Did he use a cable adapter to keep the factory camera on both displays or did he splice into the existing signals and split the video feed out to both device inputs?
will the k150 and RR maestro take care of this and show the rear view camera on my new 8200NEX via maestro harness? will I have to do this? if so does it disable the view in the rear view mirror or will I have both? thx
What are the videos+&- on a 2008 Ford f150 lariat my camera in my rear view mirror in i can't figure out what tow wires Everytime I touch them it makes a load noise in my subwoofer can you please help thanks
Can you make a video on how to install any backup camera, meaning not the camera that comes with the kit. But a universal camera to the rear view mirror backup mirror touch. With the 2.5mm plug. 👍🏼
I watch a lot of y'all video in y'all had my hopes up that I can move my camera from my rearview mirror to my after market radio but I tried everything I can see from y'all video in I can't get it to work in y'all won't answer my comment I found out that my red and yellow while you're in my black and yellow while you was to my camera but I don't know where to hook the end of the RCA plug that I cut how do I hook that to the wires on the camera cuz every time I do it gives me a loud noises in my cell phone
Even factory cameras are low SD resolution. When going to a tiny display in the mirror, they could get away with really low quality camera.. so likely barely 720x480 SD resolution...
Man I'm having so much trouble. I have the reveres wire connected but I hooked up to 2 wires that produced 6 volts. (No wrapping on them. Plugged rca to unit and no signal. If I play with the rca connecting and disconnecting I get like distortion but no clear image. Still works on my mirror but not unit.
The math is pretty crazy and out there but everyone can do it. So many details, suspensions, brakes, etc. 2 literally became one with our technology, science, amplitude, speakers, audio, 📹 video. Some technology had came from everywhere on planeaap.lanet
Have the same F-250 truck the bradded wire is ground shield that in this case you don't connect. The only one you connect is the Purple is positive and the White is negative ground. Wish you went a little slower when sliced the RCA to the harness to we can see how that's done. Thanks great Video man!!!
Great video Guys. I'm planning on rerouting the mirror feed on my 2010 F150 to my after market head unit. Wondering if you know the colors of the video feed wires on my vehicle?
Hi, wondering how did you do it, i have also 2010 f 150 , i am confused about how connecting reverse trigger wire to aftermarket radio?
I have a 2012 avalanche and how do i move the backup camera from rearview mirror to the dash screen? Are there any settings thru the one currently in dash? Thanks
you guys do a great job..straight to the point info..keep the videos coming
Hello would this also work with a aftermarket rear view mirror camera and a pioneer aftermarket car stereo camera?
do you have same video for 2018 ram 3500?
This Video is exactly what I was looking for. Thank You
Can it still be moved to the radio because I added a 3rd brake light with a camera. So I want the rev camera and 3rd brake light both be displayed on the new radio screen
You guys have amazing content! Is there a possibility you guys can help me with my 2009 Honda Pilot?
Nice video. Can you do this with any head unit?
Awesome, the question I have is can you have both the mirror and the touch screen radio backup camera working at the same time,..?
Yes if you like.
What's the Pros and Cons of having both back up camera Working at the same time,...
What kinda of wire should you use for the camera wire?
Where did you get the RCA cable? I have a 2008 F150 and want to do the same thing. Do i need to hook up anything else??
Same here. I am wondering the same
Same here except I have a 2012 Ford f-150. I have watched just about everything on TH-cam because I can’t get my camera to display on my pioneer touch screen and my mirror camera has the blue screen of death ☠️
Great video. Got my unit working by doing exactly what you are showing. Do you know what wire I can grab for the reverse signal on a 2010 Expedition?
So I have a question about my 2008 toyota sequoia. I want to install a factory camera to a aftermarket stereo. I noticed one day when looking at where the camera would be placed in the rear I saw that it already is prewired in the event if I wanted to install a camera later on. The wire runs through the headliner towards the rear view mirror. I guess what I want to know is from the pre existing wiring should I only require to solder on a RCA male connection onto the pre exisitng rca wires? or do I also need to do something with a reverse wire? If i need to do something with the reverse wire what should it connect to or how would I go about integrating towards the camera working. I also noted in your video that you used a 12 volt converter to 6 volt would I need that? Please Reply...Thanks
Cant you find that shielded wire behind the dash and connect to it there, with having to run down the pillar?
What about an aftermarket touch screen mirror. I bought a mirror that is a dash cam and has a reverse camera function also. I want to use my existing backup camera that is fed to the old stock mirror. 2012 Silverado 2500hd. The new mirror input is a 3.5 mm jack plug with 4 wires. I can test which wire is what. TOGUARD Backup Camera 10" amazon.
Great video, thanks. But how can you maintain OSD such as guide lines that move by moving steering?
Do you have specs about the 2011 Subaru Outback with this same issue? I'm purchasing a Kenwood Excellon with the Maestro Data link to connect it to the car's computer. THe camera seems to be separate based on this video. The work doesn't seem to be super hard. Our local car stereo place said that the picture would be REALLY bad (like 360p on youtube bad) BUT, the functionality would be nice. Any thoughts or suggestions.
I would like to this but from mirror display to oem entune head unit 13 Tacoma. Any ideas?
How can retain factory camera for 2011 Kia Sorento with the reverse camera is in the rear view mirror
does there happen to be a plug and play kit yet for a 2011 ford expedition ?
Followed instructions and picture looked good for few hours bit now imagine looks bad. Any ideas?
what year of f150 where you doing that on I have a 2011 f150 and just looking to replacing my truck with a kenwood deck. Also what is better the kenwood mic. or the oem mic and if the oem mic is better can i make that mic work with the kenwood deck. or does it have to run with sync. using the maestro RR. cause i want the oem mic to work with android auto using google assitant
Can you keep the camera image on the mirror also?
I want to know that also. I'm sure if you just tap into it it would work. If voltage allows it
Yes.
I tapped into the wires down by the parking brake 2011 f150 reverse camera in mirror (white/green center positive) (brown/purple shield negative) ... What im noticing is on the pioneer avh-2330nex is a blurry image ... Any insight as to why this is happening ... To thin video cable or just a low resolution camera ? Maybe combination of both ... Have you had this issue ... I choose the foot location due to less invasive and shorter wire run ...
Could be because you split the line. 75 ohm 1v peak to peak is analog composite video. May need better cable or a distribution amplifier to boost/split the signal and maintain 1vP-P.. broadcast TV engineer..🤔🤷♂️
That is most likely the case as when i unplugged the rear view mirror signal from back of mirror it cleared up on the radio significantly ... Adding a booster / splitter is not an option .. due to not caring enough about it ... Its tolerable and clear enough ... Thx for input tho ...
Thank you for this, because this is what I need to do just got a dash cam mirror which also has backup camera and ATOTO A6 which can show my backup I knew it could be done but did not know how... Again thanks.. from the new guy
Where do I get that RCA cable you used to splice into the signal wires at the mirror?
Hi.. did you found what tipe of RCA cable is....??
I also want to know that. Do you sell a kit?
Any composite RCA style video cable, like what you used to hook up a VCR with. The yellow is all you need, good coax style would be best..
Yes. All the math and hardware hardwire to software and wires. Numbers and figures had added up but many had been confused light years ago. 😐
Can you parallel, or split, the signal so that the image remains in both the mirror and the head unit? Planning to upgrade the deck in my 2012 Chevrolet Silverado 1500 LT.
Brandon B, I watched another video like this and the guys reverse image was on the mirror and the radio screen at the same time. It should remain on both, no splitting or anything required
Red Slayer Do you know which method he used to show the OEM camera on the head unit display? Did he use a cable adapter to keep the factory camera on both displays or did he splice into the existing signals and split the video feed out to both device inputs?
I think he split it like this guy does
will the k150 and RR maestro take care of this and show the rear view camera on my new 8200NEX via maestro harness? will I have to do this? if so does it disable the view in the rear view mirror or will I have both? thx
Blake Langley if the camera is in the mirror, you will have to move it.
I have the same vehicle. Instead of retaining the mirror backup camera and displaying it on the screen, how would I get it on just the screen?
Likely just splice and leave mirror disconnected...but that may not work..
What are the wire colors?
is the ram 1500 the same or different i have a ram with backup cam in the mirror and I'm about to replace the head unit
peppaboy9 the process is the same.
So I did this successfully but it seems that I’ve lost
Image quality on both. Any thoughts ?
What are the videos+&- on a 2008 Ford f150 lariat my camera in my rear view mirror in i can't figure out what tow wires Everytime I touch them it makes a load noise in my subwoofer can you please help thanks
Can you make a video on how to install any backup camera, meaning not the camera that comes with the kit. But a universal camera to the rear view mirror backup mirror touch. With the 2.5mm plug. 👍🏼
I watch a lot of y'all video in y'all had my hopes up that I can move my camera from my rearview mirror to my after market radio but I tried everything I can see from y'all video in I can't get it to work in y'all won't answer my comment I found out that my red and yellow while you're in my black and yellow while you was to my camera but I don't know where to hook the end of the RCA plug that I cut how do I hook that to the wires on the camera cuz every time I do it gives me a loud noises in my cell phone
was the rear view mirror retained when in reverse??
chitwnkrz yes
can i do that on my toyota tundra?
What about the 2012 Tundra? Is it the same?
mc60729 did you try it?
Is it normal to lose resolution in the radio camera?
When you move a mirror camera to a radio yes. The camera is not made to display on the bigger screen.
Even factory cameras are low SD resolution. When going to a tiny display in the mirror, they could get away with really low quality camera.. so likely barely 720x480 SD resolution...
@@markh.3665 They are more like 240.
My brain and eyes can’t work as fast as your camera. It didn’t do me a bit of good to watch this video--I’m old!😂😂😂
Man I'm having so much trouble. I have the reveres wire connected but I hooked up to 2 wires that produced 6 volts. (No wrapping on them. Plugged rca to unit and no signal. If I play with the rca connecting and disconnecting I get like distortion but no clear image. Still works on my mirror but not unit.
Great work guys, keep up the awesome videos. very informative.
Tim datoolman thank you has always
This guy is awesome
Great info thanks alot.
2010 F150 wires are Brown (Positive). Brown/Yellow (Ground).
Could you also add parking lines?
Tim Allen only if the radio has them. In the Ford they are built into the mirror.
Mirror?
Kia soul 2014 reverse camera.....let's try that shall we
Sherman Berkeley it is going to be a little harder and you will need a 12 to 6 volt converter.
thank you so much
Juan manuel V you bet, thank you
Had the perfect opportunity to have a back up camera and a hitch camera but you didnt take advantage of it
Nice
thanks ...
Not an RCA cable.. Called coaxial cable.
Can I split it to a 64" 4k monitor?
(ArrrArrrArrr)
BAssTruck_Improvement
You could but signal is likely 720x480 or less and would look like crap scaled up that big..🤷♂️
Not very detail
The math is pretty crazy and out there but everyone can do it. So many details, suspensions, brakes, etc. 2 literally became one with our technology, science, amplitude, speakers, audio, 📹 video. Some technology had came from everywhere on planeaap.lanet