Foscam HD Cameras - Port Forwarding on PC
ฝัง
- เผยแพร่เมื่อ 27 ธ.ค. 2012
- Foscam HD Cameras - Port Forwarding
This tutorial shows you how to see your camera remotely from any outside network, which requires port forwarding. Forwarding ports in your router allows incoming connections into your camera which is connected to your router. In this video we show you how to log into a Linksys Cisco router, navigate to the Port Forwarding settings, and forward the ports in the router for the camera. We also show you how to find out your external IP address once the ports have been forwarded so that you can use this to access your camera from any outside network and even on your smartphone! - วิทยาศาสตร์และเทคโนโลยี
![Port Forwarding for Hikvision Cameras [ w/ Real Example ]](http://i.ytimg.com/vi/RtEOHKzh6uM/mqdefault.jpg)
hvala za tutorial...lepo i jednostavno :) slab sam sa engleskim ali sam skapirao
Thanks for the great tutorial. One of the better explanations of port forwarding for IP cams.
After hours of searching, I came across this video out!
10 minutes and it was ready!
thank you very much!
Erik de Vries
from the Netherlands!!!!
Thank you very much! you just saved me a whole lot of time setting my ip cams.
Thanks, your video helped me get it done, Best I found. Have a AT&T router but after watching I understood, After I had it working I unhooked the cable and moved it. When it went wireless I had to go in and forward the port in wireless mode but was easy , Thanks for taking the time to post this video
Thank you thank you thank you!!! Worked like a charm and i learnt how to port forward and access internal ip address such as my NAS drive and foscams. Can't thank you enough ;)
VERY COOL TUTORIAL, THANK YOU SO MUCH.
Thank you very much! this was very helpful.
Nice tutorial ,thank you.
Very useful, thank you very much!
great work!
Thanks for the tutorial ... nice and easy :) I'm weak with English but I realized
thanks for the video! will try it with my Xeoma software
very informative
very nice thanks for sharing
I have a Foscam FI88910W cam. I spent months trying to configure the camera to view over the web. I was able to see the video from within my local network using the camera IP and open port but never using the external IP or my No-Ip account. I even talked to Foscam Support & Belken without success. I switched to a d-link router & setup port forwarding using latest vid on your site
super intéressant,la vidéo m'a permis de connecter enfin ....ma camera ,merci
Nicely done. Helpful. My foscam has a secure port and a stream port. I assume that these need to be port forwarded as well?
Glad your router supports NAT loopback. You are accessing the WAN access from inside the LAN. Without NAT loopback, you would not have been able to access your camera which is also inside your LAN. A better demonstration would have been showing you accessing the camera from outside the Internet.
As a general practice, it is not a good idea to use well-known TCP ports (i.e., those 1024) for custom applications. Good rule of thumb: always use port #'s > 1024...
This tutorial was excellent looks so easy on a lynksus but unfortunately doesn't help me with my Netgear ADSL Modem Wireless Router DG834GSP if u can give any information on how to do it with mine i would be eternally greatful i'm going nuts trying to figure it out thanks.
Followed you step by step and keep getting "Port Overlap Occurred, Please Change Your Entry". When I hit save in my port forwarding section. I made sure my firmware was up to date. I followed the video quite a few times to make sure it wasn't anything I missed. I'm using the Cisco E1200 router. No website has been able to help me so far.
Do you have one for netgear? I am stuck on the port forwarding part in the netgear.
My Foscam port setting shows, HTTP port 8080, HTTPS port 443 and ONVIF Port 888. I tried the 8080 and it's not seeing outside of my home network.
-edit- I just realized my Netgear router is not listing the camera on its SSID list. The camera is connect using WPS, not sure where to find in the router.
My questions is this. I wish to setup my foscams in one of my out buildings. I have my main computer, dsl modem, and router in my office. I have a buried phone line to the outbuilding where I have another desktop computer and router. This is the where I wish to place my foscam.
Since I need a static IP, do I set up my static ip on the first router in my office with no cam, or do I set it up on the router in the outbuilding, or both?
I plan on being able to view my foscam both on my computer, and my smartphone.
how do you port forward a arris dg860?
I have basic Network setting and http port but no media port
Can I find out what model Cam I have if I'm remote?
tnx
Just bought the 9821P and the browers plugin doesn't work for Chrome and IE. Any tips?
Have to tell you, I was ready to give up for the remote access, but it would defeat the purpose, the main reason we choose foscam was because of the remote access. I was able to get it set up the right way, only downside, you guys should create an app for Windows phones :-(, not sure if there is a work around on how to connect from a windows phone, I get a plugin error.
I'm having an issue with the wifi. I get's disconnected very often. I used the small and big antenna. Can you help? thanks
then while the main 8090 port is seen the "media port" 888 is blocked
Any idea on the reason for this ?
active mode works only on old IE
for some reason i dont have media port all i have us httos port http port and onvif port ?
Same here I am ready to give up on remote acess. Not very plug and play.
DA Bessire they should it called it OFFLINE CAMERA.
+Joey m insist
try again the port is what allow remote access
create a media port on your gateway even if not asked in the software, it cannot hurt
foreword them all and dont forget P2P port
http => 80, https => 443, ONVIF => 888
choose "TCP" for 80, 443 port forwarding setting in router is easy,
but neither TCP nor UDP does not work for ONVIF, what should I do?
When I tried to login on foscam c1 camera from browser in windows, it gives error of username / password. While my password is blank and I can see my camera through my cell phone
hi my router is ZTE H108N i can not find my ip adress do you know why?
will this work with a windows phone?
Hello I chanter routers and my cameras are gone, I can't find any information on this. My cannot log into cameras ip camera tool either.
Changed
my router is asking me for source, external and internal port numbers? how do i identify this?
+Jae Yu I dont know you, but I have the same port address int and ext I think (may be it s dangerous) 8090 in my case unless int port is 80 (?) Sorry not to be more helpful
good tutorial
worked fine on chrome windows 10, & IE , only Push mode (active X mode does not work no I undestand it is as active x is not supported undes windows 10 "edge" that replace IE, but it works fine still with IE)
Netgear gateway CBVG834G (cable&voice network) and FI8910W (cheap) camera.
had some trouble first, then I forwarded the port 888 without being asked "media port" anywhere.
The camera firmware does not work yet in active x mode with windows 10 but I do not desesperate , it works with Chrome push mode.
access on internet with the MAC (ext?) address, port 8090 (declared in camera and gateway)
menus can have different names I have port forwarding and port triggering in 2 separate menus
I was even able to send mail on alarm using SMTP port 25 not secured, (no TLS) the camera being plugged on the gateway , no password to send mail, took me some time...
May be that would work with cameras plugged in wifi mode too
+Isaac OLEG thank you for saying that you had trouble with Edge and not IE, i had trouble setting up on Edge, but your comment made me switch my browser to IE, now i can use my FI9831P on IE
+doctorimagineer thanks
Since then I had once to reset totally the camera that did not access to the port anymore, using a steel needle in the hole intended for that, it corrected the problem. (I had to configure again port forwarding)
Login with whose credentials? Camera name, Foscam account info? network admin credentials? What???
again No-Ip or external no working. The narrator said that 'video could only be seen using the external IP from outside your local network'. So I went to the library & was supprised to find I could see video using both my External IP & No-Ip accnt. You need to make it clear to your customers of this fact. I damn near sent the cam back to Foscam.
i brought 2 foscams and I'm done with this company. matter of fact sell it and get something eles. this is ridiculous. foscam get your shits together, and people aren't going to pay fee for you to fix your own stuff
17 minutes?
Show me 4 lines of text and I'm out of here about 17 minutes earlier.
Painful video ....
utubesigmae Agreed. This guy rambled on & on. Just give the instructions for fucks sake.