This absolutely fixed my problem. All day half a night trying to figure it out I felt like the commentor Sam Trew as she stated about giving up then came across this vid...Thanks So much for sharing with us. You made my stress level come all the way down. Now I can get my gift out on time.
I came across this today, I was literally in tears because this has worked so many times before and I couldn't for the life of me work out why! I've cleaned, unplugged, collaborated, updated you name it I've spent the whole day doing it. I was about to give up when I found you.... You saved my sanity, I'm also not a quitter and it would have been a very long night while I tried to suss this out. Thankyou so much, now I can sleep x
Thank you so much for this video, you saved my Cricut from the bin :-) I had already printed mine on premium printable vinyl so was very annoyed at the thought of yet more material wasted. Instead if redoing it I got a red sharpie and drew the 4 dots then a offset border around the black part on the top edge of one of the stickers and it worked!! 😁😍😘
Saved my bacon!! Thank you. The circles worked, when just darkening the guide lines did not. So glad I found this tip. If you are struggling with the cuts lining up, try this. Especially if you have already calibrated your machine.
Thank you so much for this video. I have been struggle hours to make this machine to read my drawing but no luck. Tried everything, the dots don’t work but darker the frame outline works like magic. Thank you so much. Almost dump my circut to garbage. Haha.
THANK YOU, THANK YOU and THANK YOU! I had been going crazy for the last 2 days trying to print my image and nothing. I used your hack and it worked BEAUTIFULLY. You saved my sanity :-)
Thank you! The black marker suggestion worked perfectly. I used a Bazic dry erase marker and it still worked with no issue. I only used a wet wipe to clean the edges that were messy.
What a LIFE SAVER😫😀 !!! The method of drawing the black line with a ruler you briefly stated at the end of the video helped me. It seems that my (NEW canon printer 🙄) is not printing black ink visible enough. Thank you so much for the hack😅 !
@@NTBVinyls hi do you have any suggestions for print and cut on brown kraft paper? I'm trying to cut out those tiny Amazon/plain boxes for an order I have to get out asap and it keeps telling me it error I need white paper 🤬. I've tried every setting including kraft paper and still nothing 🥺 thank you in advance for your time
Thank you so much, very glad I stumbled upon this video, it worked! I have struggled way too long to try and get the machine to cut, I did have to do both though the dots and then draw over the black lines tried twice so far and it's working thanks again for sharing!
Thank you so much! I went with the black line using a ruler. CAUTION: make sure the ink from the marker doesn't get on your ruler bc it will smear when you move it. I had a self laminating sheet over my design so luckily I was able to wipe most of the smears off.
The little circles didn't do the trick but the "darkening the sensor lines" came through like gang busters! "Gang busters"? Geez, I'm starting to sound like my father... Thanks, Cody!
How would this work on white vinyl? I am using Neato white vinyl sticker paper and I still cannot get it to cut unless I tape copy on regular paper. Plz help
Hi Christin! To confirm, you have a U shaped border instead of the rectangle? I’m not familiar with that and I would suggest reaching out directly to Cricut.
i just wanted to print one sticker and the stupid thing scans everywhere but the black box. It scans beside it, it scans below it, it scans above it, and it scans inside of it. its like my cricut is avoiding my box on purpose!
@@Itsjayrozay The black line that prints all the way around the design can sometimes be faint. You need to carefully take a marker and darken it, so that the sensor can see it better.
Thank you for the video. I had already printed my project pages, another tip would be to move the label paper 1/8" from the edges and turned off all the lights, least that is the only thing that worked for me. I tried using a marker and that did not work.
I calibrated 4 times none of the cuts came close. And when trying to cut stickers it is way off alignment. What are the steps when making do we have to flatten in ds or just attach
flatten the image makes it all 1 if you don't flatten and you have multi pieces it will cut each 1. I use attach after I flatten if I want to fit my images to one page because print and cut it may send your images to another page and you still have space on the other one. are you using the download version or the one on web (window)
Very good information... my problem is different, for no apparent reason my cricut does not respect the size of my image, I print and the image looks very large compared to what I want to cut ... will you have any idea how to solve this ..? please help..!!!
Good morning, how are you? I have also tried everything mentioned, and none of those things worked for me either. What did work for me was to make sure the grey rolling things were clean. I took a wipe and cleaned the grey thing that rolls the mat. I didn't realize there was ink on it, and the ink was smearing onto the cut line. I hope that helped. Have a great day😘
Would the quality of the sticker paper affects it if your using the glossy sticker paper?? I've tried your method like 4 times today but it still keep saying "printer then cut error" 🤷🏻♀️🤷🏻♀️🤷🏻♀️
@@OMGRaquelLee I've just switched to a matte vinyl sticker paper instead of the glossy one and so far I haven't had any problem with the print and cut. I just put laminating sheet on top to make it glossy
If you want to make them glossy just get cold lamination vinyl sheets in clear cut them to fit inside the cut line (so the registration marks stay matte). The Cricut hate glossy papers because it reflects light back into the sensor. This is the only work around I have found to work for glossy waterproof stickers.
Hey... my print then cut feature works great until it scans the borders and then it stops completely before it starts cutting and design space closes on my iPad....and my Cricut is just sitting there like..... very frustrating!! HELP!
It didn't work for me unfortunately. I'm not sure if it is because i tried to use water slide paper, but i don't think that should be the issue. It works fine with regular sticker paper
I have calibrated mine 10 times and it still does not cut properly. It cuts to close to the right side and cuts a gap on the left side. Feel like returning it😭. Cricut support center is taking a while to respond back to me. Will try this method but mines are outlined with white and even the black lines are off.
Same I’m sad to say I’ve tried calibrating like 30 times at least 10 for the last 3 days and customer service line isn’t open until tomorrow they are no longer helping online so I’m the most frustrated. Did you ever figure out the problem? I would be so grateful 😩😩😩
VIBINESSE sadly cricut support never got back to me and issue was never resolved. I went to my spotlight store to return it, they could t do a return but took my details and said they’d organise someone to fix it. Never heard back so i literally sold my machine yesterday. My story didn’t have a happy ending sorry haha. I now have a cameo and once the kinks are sorted out works well!
Janiaya Green yeah I’m guessing the light was incorrectly reading the black boarders because i was cutting black circles and it was too close to the boarder
Janiaya Green I literally copped these exact steps. I use was using glossy paper so the boarder was too glossy to be scanned by the Cricut. what I learned from another video is get a ruler and black maker and trace the black board over just so that way it’s darker and can be properly read by the Cricut machine
I bet this is my problem for sure. but the other weird thing is after it would read and read and rrrreeeeaaad the registration marks forever - it would then head to the top left corner and cut random small circles and ovals. nothing on my design at all!!! any ideas?
Hi if you're still active I need help asap. I'm new to Cricut I have an explore air 2. I'm trying to make and cut my custom hang tags but the cricut keeps on selecting the last 7 tags at the bottom of the page to print and the rest are blank. How do I troubleshoot this issue?
Unfortunately I don’t know that I’ll be of much help on this, as I am uncertain to the cause. I would suggest contacting Cricut customer support at 877 727 4288
this didn't help me what I found was I was having issues connecting with my new Macbook to the Cricut using a USB cable with the dongle. At first, it would only work with Bluetooth, but I managed to connect it with the USB cable for some reason. However, now it keeps giving me an error message after I went back to bluetooth issue went away.
I was having that problem when making my stickers. I changed my paper type to Cardstock with backing and my problem is fixed. Hope that help others as well.
This absolutely fixed my problem. All day half a night trying to figure it out I felt like the commentor Sam Trew as she stated about giving up then came across this vid...Thanks So much for sharing with us. You made my stress level come all the way down. Now I can get my gift out on time.
Happy to help!
I came across this today, I was literally in tears because this has worked so many times before and I couldn't for the life of me work out why! I've cleaned, unplugged, collaborated, updated you name it I've spent the whole day doing it. I was about to give up when I found you.... You saved my sanity, I'm also not a quitter and it would have been a very long night while I tried to suss this out. Thankyou so much, now I can sleep x
Thank you for saving my Cricut from being tossed through the window!!!! It worked beautifully!!
I was about to go an buy a maker..lol this video helped alot
Mine almost went to the curb as well! Lol
Lol the way I feel lol
😂😂 me right now
You answered what the tech dept from Cricut could not. This fixed my problem
That’s how I was feeling 😂
that was extremely helpful, did everything you did and my machine finally started working! thanks
Thank you so much for this video, you saved my Cricut from the bin :-) I had already printed mine on premium printable vinyl so was very annoyed at the thought of yet more material wasted. Instead if redoing it I got a red sharpie and drew the 4 dots then a offset border around the black part on the top edge of one of the stickers and it worked!! 😁😍😘
Honestly this has probably been one of the most helpful tips on TH-cam thus far for a design project so thank you!
I think it is an update error. It happens to me with the explore and maker 😭
Saved my bacon!! Thank you. The circles worked, when just darkening the guide lines did not. So glad I found this tip. If you are struggling with the cuts lining up, try this. Especially if you have already calibrated your machine.
Oh my gosh thank you!!! I had a huge order to do and all my cuts were wrong!! Thank goodness I found your video, it helped my issue.
I’m happy it worked!
Thank you so much for this video. I have been struggle hours to make this machine to read my drawing but no luck. Tried everything, the dots don’t work but darker the frame outline works like magic. Thank you so much. Almost dump my circut to garbage. Haha.
THANK YOU, THANK YOU and THANK YOU! I had been going crazy for the last 2 days trying to print my image and nothing. I used your hack and it worked BEAUTIFULLY. You saved my sanity :-)
the little circles did the trick. thanks a bunch! I found you only need two circles, one for the bottom right and one for the top right.
Thank you! The black marker suggestion worked perfectly. I used a Bazic dry erase marker and it still worked with no issue. I only used a wet wipe to clean the edges that were messy.
I am new to Cricut and was printing black text on white paper. I thought I was the problem but this fixed the issue! Thanks! So frustrating!!
Happy to help! Be sure to send over any questions you have, and I may make a video on it!
Wow!! I was beginning to think I was going to have to buy a Maker because my Explore Air 2 just wasn't doing what I needed. You saved me !!!
What a LIFE SAVER😫😀 !!! The method of drawing the black line with a ruler you briefly stated at the end of the video helped me. It seems that my (NEW canon printer 🙄) is not printing black ink visible enough. Thank you so much for the hack😅 !
This problem has been bugging me for months and this has worked. Thanks for sharing!
Thank you thank you thank you!!!! I spent hours trying to fix this issue until I came across your video......worked great!!
DUDE! You the man! I've been scouring the web for the last 2 hours so many theories - so many reprints, restarts. This fixed it! A++
So glad it helped!
@@NTBVinyls hi do you have any suggestions for print and cut on brown kraft paper? I'm trying to cut out those tiny Amazon/plain boxes for an order I have to get out asap and it keeps telling me it error I need white paper 🤬. I've tried every setting including kraft paper and still nothing 🥺 thank you in advance for your time
Thank you so much, very glad I stumbled upon this video, it worked! I have struggled way too long to try and get the machine to cut, I did have to do both though the dots and then draw over the black lines tried twice so far and it's working thanks again for sharing!
I’m so happy to hear that it helped. Best of luck!
WOW! Extremely helpful. Smart! - Thanks.
Thank you so much! I went with the black line using a ruler. CAUTION: make sure the ink from the marker doesn't get on your ruler bc it will smear when you move it. I had a self laminating sheet over my design so luckily I was able to wipe most of the smears off.
Thanks so much I was having a hard time until I found your video.
Tried the sharpie suggestion and it worked, thank you!
The black marker trick worked!!! Thank you.
It WORKED!!!!!!
God bless you, abundantly 😁
OMG!!! It worked for me with the 4 red dots. Thanks do much
I owe you a daiquiri!! OMG.. this worked and I'm not in a panic anymore!! ThankYou!
I was having a melt down!!! Thank you so muchhhhhh wow worked on the first try!!!!
Thankyou so much! the sharpie tip helped me solve the sensor issue.
Using a black fine point marker (and a firm ruler) over the guide/reference box helped me, Thank you!
The little circles didn't do the trick but the "darkening the sensor lines" came through like gang busters! "Gang busters"? Geez, I'm starting to sound like my father... Thanks, Cody!
Same for me! All this technology and it came down to a sharpie… thanks so much!
THANK YOU THANK YOU THANK YOU!!!!!!!!!! You saved my project!!! AHHHHHHHH!!!!!!!! I'm so thankful for this video!!!!! Thank you again!!!
Happy to help!
I wonder if this would also help with my machine cutting through the middle of my black stickers.
I followed each step but it doesn’t give me the option to print once I move the circles to the corners
Thank you! This solved an issue I was having yesterday.
How would this work on white vinyl? I am using Neato white vinyl sticker paper and I still cannot get it to cut unless I tape copy on regular paper. Plz help
Thank You so much, It worked for me . with the white dots, I appreciate your help.
Does this tip work for glossy sticker paper? Or just matte?
It worked!!! thank you! I thought it was the type of paper I was using.
WOW. Thank you so much! Sincerely, my sanity.
Ok literally same right now for me 😭
I have an 11x17 with circle shapes, I cannot get the cutter to align my cuts so my cuts are way off. Any suggestions?
Thank you soooo much! The red dots did the trick!😃
Hey, Cody ! Good morning. My top sensor line , when I print is missing. Any idea what to do ? My image is at 5.25 x 9.25
Hi Christin!
To confirm, you have a U shaped border instead of the rectangle? I’m not familiar with that and I would suggest reaching out directly to Cricut.
Thank you thank you thank you. Went around edge with sharpie it WORKED. I didn't want to buy a new printer. 🎉
i just wanted to print one sticker and the stupid thing scans everywhere but the black box. It scans beside it, it scans below it, it scans above it, and it scans inside of it. its like my cricut is avoiding my box on purpose!
Thanks so much. Sharpie was the ticket for me.
Did you print the image with the white and red dots or did you just cut?
I printed it onto my sticker paper, and then cut it like normal. The machine cut out the red dots, and the images I wanted to make into stickers.
Do you think that I can change the sensor of my maker 3. Its broken
Thank you sooo much, i was about to give up
This is so helpful. ❤ thank you so much! I hope 🤞 I can finally make my shirt lol
USEFUL TIP - if operation is set to "Print then cut" try selecting "Basic cut" instead.
The thumbnail is really good for this video
hypnotizethemind well thank you.
Thank you so much it worked ☺️
Huge Thank you from my wife lol it was the faint dark line from my printer
Happy to help!
What faint dark line.? Could you PLEASE EXPLAIN IM HAVING THE SAME PROBLEM!!!
@@Itsjayrozay The black line that prints all the way around the design can sometimes be faint. You need to carefully take a marker and darken it, so that the sensor can see it better.
So what if it's already printed? Should I just reprint or is there a way to salvage this?
thank you!! this worked for me
Thank you for the video. I had already printed my project pages, another tip would be to move the label paper 1/8" from the edges and turned off all the lights, least that is the only thing that worked for me. I tried using a marker and that did not work.
I calibrated 4 times none of the cuts came close. And when trying to cut stickers it is way off alignment.
What are the steps when making do we have to flatten in ds or just attach
flatten the image makes it all 1 if you don't flatten and you have multi pieces it will cut each 1. I use attach after I flatten if I want to fit my images to one page because print and cut it may send your images to another page and you still have space on the other one. are you using the download version or the one on web (window)
Thank you!!! You are a genius!!!
You Totally Rock!!! Thank you!!!
Very good information... my problem is different, for no apparent reason my cricut does not respect the size of my image, I print and the image looks very large compared to what I want to cut ... will you have any idea how to solve this ..? please help..!!!
Thank you...u saved me some money
I did all the steps, but mine isn't working still.
Same!
Did you ever fix it?
Good morning, how are you? I have also tried everything mentioned, and none of those things worked for me either. What did work for me was to make sure the grey rolling things were clean. I took a wipe and cleaned the grey thing that rolls the mat. I didn't realize there was ink on it, and the ink was smearing onto the cut line. I hope that helped. Have a great day😘
FREAKING LIFE SAVOR!!!!!! THANK U!!!!!
It worked! Thank you!!!
Im using cricut on my ipad, how can i move the dots around on the mat layout?
Same I would like to know
O Mi Word it worked ... TY so much!
Thank you so much!
thank you for this, it finally worked for me! i was about to throw a tantrum lol
hi i have tried this with the dots and also a black marker ive cleaned the light area and it still doesnt work any idea why please?
Would the quality of the sticker paper affects it if your using the glossy sticker paper?? I've tried your method like 4 times today but it still keep saying "printer then cut error" 🤷🏻♀️🤷🏻♀️🤷🏻♀️
Did you ever fix the problem?
@@OMGRaquelLee I've just switched to a matte vinyl sticker paper instead of the glossy one and so far I haven't had any problem with the print and cut. I just put laminating sheet on top to make it glossy
If you want to make them glossy just get cold lamination vinyl sheets in clear cut them to fit inside the cut line (so the registration marks stay matte). The Cricut hate glossy papers because it reflects light back into the sensor. This is the only work around I have found to work for glossy waterproof stickers.
Thank you sooooooo much!!!!!!!!!!!!!
Hey... my print then cut feature works great until it scans the borders and then it stops completely before it starts cutting and design space closes on my iPad....and my Cricut is just sitting there like..... very frustrating!! HELP!
My cricut isn’t cutting around the the image. It scans it and then tries to cut something on top of my image. Please help!
Great video thanks for the upload ❤🐼❤️
thank you so much.
I can't click on flatten its not highlighted.
It didn't work for me unfortunately. I'm not sure if it is because i tried to use water slide paper, but i don't think that should be the issue. It works fine with regular sticker paper
Having the same problem with waterslide but not paper for the same file
Would you know why I can’t even calibrate my machine?
I have calibrated mine 10 times and it still does not cut properly. It cuts to close to the right side and cuts a gap on the left side. Feel like returning it😭. Cricut support center is taking a while to respond back to me. Will try this method but mines are outlined with white and even the black lines are off.
I'm having this issue too and have calibrated over 20 times omg
Same I’m sad to say I’ve tried calibrating like 30 times at least 10 for the last 3 days and customer service line isn’t open until tomorrow they are no longer helping online so I’m the most frustrated. Did you ever figure out the problem? I would be so grateful 😩😩😩
VIBINESSE sadly cricut support never got back to me and issue was never resolved. I went to my spotlight store to return it, they could t do a return but took my details and said they’d organise someone to fix it. Never heard back so i literally sold my machine yesterday. My story didn’t have a happy ending sorry haha. I now have a cameo and once the kinks are sorted out works well!
Sorry to hear that I would’ve been so frustrated with them not accepting return. I think I got mines to do at least something that I can work around
THANK YOU SO MUCH!!!!!!!!!! 🙌🏼
What Worked for YOU? Did you have the problem with the sensor reading? If you could help me I would REALLY APPRECIATE IT!
Janiaya Green yeah I’m guessing the light was incorrectly reading the black boarders because i was cutting black circles and it was too close to the boarder
Janiaya Green I literally copped these exact steps. I use was using glossy paper so the boarder was too glossy to be scanned by the Cricut. what I learned from another video is get a ruler and black maker and trace the black board over just so that way it’s darker and can be properly read by the Cricut machine
The black Sharpie on the outline worked great! Thanks!
Bless you
OMG! THANK YOU! 😘
Sad I've tried it all and it's still not working
Anyone know why i can’t move the items is it only able
To work on the computer because I’m using my phone
Can you please tell me how to put the border around
You are genius
I tried the black line and it worked perfectly, u believe my printer didn’t print the black box as precisely as it needed to be
I don’t have the flatten option what am I doing wrong???
What do I do if I'm trying to print a page from my cricut to my printer and the left registration line from the box will not print?
That's a new one for me. I would reach out to Cricut support.
Haha thanks for the reply. I actually ended up opening it up, the plastic gears inside completely came off.
mine is doing the same thing!
It didnt work for me. it printed at an angle and cut my image...ugh! I did eveythingin the video
Did it work now?
THANK YOU!!!!
I bet this is my problem for sure. but the other weird thing is after it would read and read and rrrreeeeaaad the registration marks forever - it would then head to the top left corner and cut random small circles and ovals. nothing on my design at all!!! any ideas?
When I click make it it doesn’t allow me to move items around on the screen.
Beth Penn I figured it out. I can only rearrange on a pc. I was trying on my phone and tablet for the longest 😂Thank you still.
Hi if you're still active I need help asap. I'm new to Cricut I have an explore air 2. I'm trying to make and cut my custom hang tags but the cricut keeps on selecting the last 7 tags at the bottom of the page to print and the rest are blank. How do I troubleshoot this issue?
Are all of your designs the same, just copied? Or different? Can you post a video showing your issues?
@@NTBVinyls theory are all the same design copied and sent to print
@@NTBVinyls Can we arrange a zoom calĺ?
Unfortunately I don’t know that I’ll be of much help on this, as I am uncertain to the cause. I would suggest contacting Cricut customer support at 877 727 4288
@@NTBVinyls I did they aren't of any help either. The error is within the design space app not the machine.
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!
this didn't help me what I found was I was having issues connecting with my new Macbook to the Cricut using a USB cable with the dongle. At first, it would only work with Bluetooth, but I managed to connect it with the USB cable for some reason. However, now it keeps giving me an error message after I went back to bluetooth issue went away.
I was having that problem when making my stickers. I changed my paper type to Cardstock with backing and my problem is fixed. Hope that help others as well.