THANK YOU SO MUCH you don’t understand I was so stressed out thinking it was just completely broken because NOTHING Cricut was telling me to do was working but this helped so much. Thank you again !!!!!
Thank you - in 2023 - it worked!! The carriage wouldn’t move and the blade would only cut in spot- soo frustrating. I still had 5 more shirts to make. So glad I found your video !
❤❤❤ I have been trying to get my silly new Cricut to talk to my computer for over an hour. thank God I found this video. 💕💕💕 THANK YOU!!!! I honestly thought my machine was fault and the Cricut help pages were useless.
THANK YOU!!! You are a lifesaver!!! Like all the other comments below, I called Cricut support three times and they couldn't help me resolve the issue and I thought I broke my Maker and had to go buy a new one, which I couldn't afford. Thank you so much!!!!!
Yo DUDE!! Thanks so much!! Right in the middle of a project & the RED Light comes on & everything else I tried didn't work. . . until I got to your VIDEO! Thanks . . .
I was having the same issue. Carriage stuck on the right side and power flashed red. Talked to support, did all the troubleshooting and they told me the unit was broken and out of warranty (less than 2 years old). This video got it working! Thank you!
Not sure if this will work but imma try it as soon as I get home! In middle of creating stuff for my brother and two niece's memorial my machine wanted to start clicking from Port A and not reading my blades. Fingers crossed 🤞🙏
I HATE this new Maker 3. I literally have been able to use it 1 time. I have had it for about 5 or 6 months now. It will not stay connected to the blutooth, it will not do the firmware update with the usb cord or blutooth. I have never been more disappointed in a crafting item.......
J'ai essayé aujourd'hui (13 février 2023) avec ma cricut maker mais ça n'a pas fonctionné . J'y ai cru puis au final toujours le même message qui s'affiche "Machine désactivée. Cette machine n'est pas en état de marche. Si vous pensez avoir reçu ce message par erreur, contactez l'Assistance aux Membres." :( :(
Thanks for sharing this. I tried it but every time I get to the “load the mat” part, then hit the “Go” button, the power button flashes red and “machine communication error” message pops up. Haven’t been able to make a single cut at all and it’s a brand new machine... So far, it’s been a huge and expensive disappointment.
I am having the same issue. Hadn't had the machine 5 months and it won't respond. I am terrible disappointed with my purchase. Did anyone have luck with emailing?
@@we3rhz I recommend calling Member Support; they were very helpful, but my machine ended up needing to be replaced, which they did when all trouble shooting failed. My machine was under warranty so I was relieved I didn’t wait to call when I experienced a problem (the above issue) I couldn’t resolve on my own.
Does anybody know how to fix this error that keeps popping up when my machine is finna get ready to cut...... it says, Custom material warning, unable to load custom materials, the cut iteration will not function correctly......
I’m having trouble with this. Even when it’s on the right setting it kept telling me custom warning. Did you get yours fix?? If so can you walk me through the process??
Bonsoir j'ai bien fait la procedure mais ça ne fonctionne pas. Je ne comprends pas ou vous allez sur votre télephone pourriez vous m'expliquer merci beaucoup
I've tried this, since my mat was loaded and all that happened when I hit create was ejection of mat. Evidently I can't update from my phone now the red light and white light won't go off! 😑
My machine gives me an error message saying “This machine is not in working order”. I tried this and it took me through all the steps exactly in your video but I’m still getting the error message. It’s funny that when you type in those keywords on the cricut help center, nothing shows up. Nothing gets on my nerves more than incompetence and Cricut is the poster child for it. What a crappy, stressful & time consuming experience. For a machine that is that expensive you’d expect different results. DO BETTER CRICUT. What a bleeping waste of time, money & other resources. I want my money back.
اواجه نفس المشكله لقد حصلت على الجهاز في يناير 2021 المضحك انه تم استعماله فقط9 شهور ولم يعد يعمل و يتصل بالاجهزه لإكمال المشاريع على usb او بلوتوث لقد استنزفت ماديا و توقف مصدر رزقي
THANK YOU SO MUCH you don’t understand I was so stressed out thinking it was just completely broken because NOTHING Cricut was telling me to do was working but this helped so much. Thank you again !!!!!
Thank you - in 2023 - it worked!! The carriage wouldn’t move and the blade would only cut in spot- soo frustrating. I still had 5 more shirts to make. So glad I found your video !
We called them nothing helped watched a million TH-cam videos and found yours! Ours wasn’t updating and it was brand new!! BUT THIS WORKED! 11-27-2021
by any chance can you help me... Mine didn't work now i can get it out of that Mode... its solid Red...
i just tried and this worked for me too
❤❤❤ I have been trying to get my silly new Cricut to talk to my computer for over an hour. thank God I found this video. 💕💕💕 THANK YOU!!!! I honestly thought my machine was fault and the Cricut help pages were useless.
Hey! Thanks a lot! Not sure if it did fixed my problem but the first cut after I reloaded the machine was a success. Thanks a lot for sharing!
Thank you so, so much!! I thought I was going to have to buy a new machine. Such a simple thing to do.
THANK YOU!!! You are a lifesaver!!! Like all the other comments below, I called Cricut support three times and they couldn't help me resolve the issue and I thought I broke my Maker and had to go buy a new one, which I couldn't afford.
Thank you so much!!!!!
I am the husband of a now very happy wife. It took me 2 hours to find your Life Saving Video, Thank you, you magnificent Person.
Thank you!!! Saved my butt!
Yo DUDE!! Thanks so much!! Right in the middle of a project & the RED Light comes on & everything else I tried didn't work. . . until I got to your VIDEO! Thanks . . .
Thank you so much for this video,
Very helpful. Now my maker works again🤗🤗🤗, so happy
Have you had any problems withbcartridge B stuck all the way down? It doesnt want to adjust pressure AT ALL i just bought this thing.
Seriously a god send! Thank you
Thanks! I was in the middle of a 6 shirt project!
Thank you so much, it worked! Was getting so frustrated because I just bought this machine too!
I've been looking for this THANKS SOOO MUCH it resolved the problem
Thank you very much!
Thank you so much. I had to turn off and on the machine to connect every single use..
By far the best help out there
It’s failing connection on the second connecting process 😢 errors appears then disconnected
Love you tank you sooooo much!
Thank you so very much!! Problem solved (head was not returning from right side of carriage)
I have that same issue with my maker 3. I don't know if I'm not doing his method correctly, but it did not work for me
I was having the same issue. Carriage stuck on the right side and power flashed red. Talked to support, did all the troubleshooting and they told me the unit was broken and out of warranty (less than 2 years old). This video got it working! Thank you!
GRACIAS HERMANO ME SALVASTE LA VIDA SI FUNCIONA EN 2022
3 cuts already so far it did helped! Thanks!
Not sure if this will work but imma try it as soon as I get home! In middle of creating stuff for my brother and two niece's memorial my machine wanted to start clicking from Port A and not reading my blades. Fingers crossed 🤞🙏
Maravilha.
Deu certo, muito obrigado.
Parabéns
Thank you!
Connected to my ipad pro, but still getting a connection failed message on design space.
Omg it worked! Support couldn't help
YOU ARE THE BEST THANK YOU
I HATE this new Maker 3. I literally have been able to use it 1 time. I have had it for about 5 or 6 months now. It will not stay connected to the blutooth, it will not do the firmware update with the usb cord or blutooth. I have never been more disappointed in a crafting item.......
Does this work with a disabled Cricut Maker?
Does anyone know how to turn it back on please? Thank you
Do you have a video showing how to reactivate a deactivated Cricut Maker...?🤫😳 I would buy one if it were possible 🙏
Same
Hi my machine is not cutting all the way. Tried different settings with mo success. Any idea 💡?
J'ai essayé aujourd'hui (13 février 2023) avec ma cricut maker mais ça n'a pas fonctionné . J'y ai cru puis au final toujours le même message qui s'affiche "Machine désactivée. Cette machine n'est pas en état de marche. Si vous pensez avoir reçu ce message par erreur, contactez l'Assistance aux Membres." :( :(
bonjour avez vous trouvé une solution ?
@@delphinesotomayor9280 non 😭
@@animdirectrice5641 i also have this problem..
Thanks for sharing this. I tried it but every time I get to the “load the mat” part, then hit the “Go” button, the power button flashes red and “machine communication error” message pops up. Haven’t been able to make a single cut at all and it’s a brand new machine... So far, it’s been a huge and expensive disappointment.
I’m sorry to hear that! Hopefully you can return for a replacement!
I'm having the same problem, I already e mail the company for help and no response yet!😔
@@MrsNayDor yes when I emailed them it took about a week or more to get a response
I am having the same issue. Hadn't had the machine 5 months and it won't respond. I am terrible disappointed with my purchase. Did anyone have luck with emailing?
@@we3rhz I recommend calling Member Support; they were very helpful, but my machine ended up needing to be replaced, which they did when all trouble shooting failed. My machine was under warranty so I was relieved I didn’t wait to call when I experienced a problem (the above issue) I couldn’t resolve on my own.
Does anybody know how to fix this error that keeps popping up when my machine is finna get ready to cut...... it says, Custom material warning, unable to load custom materials, the cut iteration will not function correctly......
I’m having trouble with this. Even when it’s on the right setting it kept telling me custom warning. Did you get yours fix?? If so can you walk me through the process??
@@chicdesign7812 SAME It's so frustrating, please message me if you got this fixed!
Saludos yo trate d hacerlo, se encendieron las luces pero no me salió nada más, esa imagen q muestras no me sale
Bonjour est ce que ça marche aussi pour une maker désactivé ?
Bonsoir j'ai bien fait la procedure mais ça ne fonctionne pas. Je ne comprends pas ou vous allez sur votre télephone pourriez vous m'expliquer merci beaucoup
good evening. I am from Brazil I have the same problem, has anyone managed to solve this problem?
I've tried this, since my mat was loaded and all that happened when I hit create was ejection of mat. Evidently I can't update from my phone now the red light and white light won't go off! 😑
How did you get it to turn off again?
Hi do you have a solution when the machine is deactivated ? I just bought one from a marketplace but I can't use it
^^^
Any ideas for a Cricut Air Explore 2 power issue? Solid red light--power issue.
Found a video re this. Will have to wait to try.
Why will mine not let me select an accessory
Same
My machine gives me an error message saying “This machine is not in working order”.
I tried this and it took me through all the steps exactly in your video but I’m still getting the error message.
It’s funny that when you type in those keywords on the cricut help center, nothing shows up.
Nothing gets on my nerves more than incompetence and Cricut is the poster child for it. What a crappy, stressful & time consuming experience. For a machine that is that expensive you’d expect different results.
DO BETTER CRICUT. What a bleeping waste of time, money & other resources. I want my money back.
اواجه نفس المشكله لقد حصلت على الجهاز في يناير 2021 المضحك انه تم استعماله فقط9 شهور ولم يعد يعمل و يتصل بالاجهزه لإكمال المشاريع على usb او بلوتوث لقد استنزفت ماديا و توقف مصدر رزقي
Don't know if you will see this followed your instruction no red light came on tool feed didn't move like yours please help if you can
Same with mine
Didn't work for me. Still solid red power button and white eject button.
Sadly this ain’t a guaranteed fix, for some it helps and others it doesn’t. Sorry to hear this didn’t help.
This happen to me also. How did you get he lights to go out?
La mía no se mueve, no enciende la luz roja
My machines turns off when I do a print n cut I’m gonna try to see if the is works. Thank you wish me luck
Did not work unfortunately
This is my problem. Did you ever resolve?
I had to get a completely new cricut
hi now i need help to get my machine out of this mode....
can someone pls Help me....
No me funciono 😢 mi cricut no lee pra hacer la calibración
Dosent wort for me
I did same you but still not work
i can't connect to Bluetooth can someone help
Is that how to activate the cricut
Mine didnt work. And I just bought it:(
Didn't work for me either and had just bought it. Cricut ended up sending me a brand new machine. Guess it was a fatal error. 🤦
@@HazelsDaughter same here. I got a a new one. I'm glad they did. Because it was pricy
I don't have that option
So scared with red light huhuhu