Pollen tumbler build your own step by step
ฝัง
- เผยแพร่เมื่อ 8 ธ.ค. 2019
- Build your own tumbler step by step process
/ johnnysgreenextractions
Music performed by Master Blaster on lead guitar, Johnny on Drums, Rick Olien on guitar, Tom Semenchuck on bass.
www.johnnysgreenextractions.ca
/ johnnysgreenextractions
Please visit us on Weed Tube www.theweedtube.com/home
![ความรักไม่ได้น่ากลัวขนาดนั้น (TRUST ME) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/9np-lAtCRpQ/mqdefault.jpg)
Thanks Johnny! Your vid's are awesome. I've spent hours upon hours watching vids on bho, dry sifting, pollen extractors etc and Johnny's vids are always so much better than all the others.
Pollen extractors, like the one you made in this vid, sell for close to or over $1000 in Australia. (We're so far behind in regards to extracts etc over here) Hydro shops can be such a rip off.
I'll make something like this myself and save $1000
Thanks for leaving such a kind comment it is our pleasure and get back to us anytime
GREAT video Johnny. Precise to the point, innovative. works great good job
Looking so good man nice job
My boy drinking a Red Stripe wearing a jamaica polo ✊🏼
And had jerk chicken for dinner! 🤯
Haha brings back memories...from when I went to jamaica
You could use a gold panning screen set. they fit a bucket. They sell them in all different mesh sizes.
You could use a wahl hiar trimmer to vibrate the screen. Just touch the moving part on the frame. That S with dance accross the screen.
You could Freeze fresh sugar leaves. If you don't have easy access to dry ice. You could keep them in the freezer until it gets below zero outside and to run that. The leaf stays solid and the clear break off.
I am not knocking you'r build you did a great job! I love it!
Just a tip for someone not as skilled as you and can't have that sitting around. As gold panning and hair trimming is normal stuff to have around.
just love your videos, you gave me a great idea for a motor i will be using my spare rotisserie motor from my old barbecue so thank you again, great looking plants by the way
That's a great idea Kevin let us know how it goes
Good job 👍👍
That's a nice doable project right there
Thanks for sharing fella!! 🌞🌞🌞
No problem 👍
That’s one hell of a video man. Gotta say I love the way you think. Will have to add this to the project list. I have some knowledge with those dc motors, I’ll have to apply some knowledge of that to this. Appreciate you sharing this diy project.
Thanks for going out of your way for leaving such a nice comment
Nice work Johnny, gonna build one myself. Thank you so much.
Hi Robert it's our pleasure good luck
Cool man, great educational video. These things are not cheap to buy. Thanks for sharing dude
Great..... You are genius...
It took me a second to recognize you without your hat and the moustache Johnny. Another great video. Incant say enough wonderful things. Hopefully some day I'll be able to use all these tools
It comes with time. Hi Andrew
Cool and well engineered idea. I love it. You and the Master blaster I believe? Are top shelf 👍🏻
Peace ✌🏻
Thank you for going out of your way for the kind words it means a lot I will try to have a video out this weekend of us blasting live plant material
Sweet video! I ordered a yard of 120 micron screen a week ago before seeing this video. My plan is very similar. I will use wood slats instead of the steel rods. This will save sewing the screen as I can staple screen right to the slat. I was going to use an electric drill but after your video I will use a bbq rottisery. I also will run drive rod right through center. This will make hanging it simpler for me. With a smaller door off centered. I am also planning it to fit in a large chest freezer. I seen another commenter mention that as well. Almost forgot I figure on hand shaking kief through the smaller micron bubble bags after. Enjoyed watching! Thanks
I love it when someone improves things, that is what we try to strive for on this channel and share it with the world Thanks Chris
where can I get the silk screen?
@@juansalgado213 I ordered it on Amazon.
Thats so professional
Iv been eyeing a hop shaker for my drum but I think I'll be taking your tips from now on as I won't need to add to what ever I make thanks again saved me time and money
Our pleasure
Thanks for the great video
IKS thanks for leaving a comment I think we might a Giant one next fall
Everyone should have a garage and tools!
Just an option instead of buying one
Awesome I knew this would be a good idea rather than paying those crazy prices 👍
good stuff, and nice shirt ✌
Looks very much like a tumbler you can buy. Very well done thou 👍
Thanks martin
Wow! I did 90% the same thing about 4 years ago. Great minds think alike.
That's the rumour thanks for dropping by Cliff appreciate that
kick ass information my friend !! Build your own tumbler step by step process is a a must see video !
Thanks so much Dollar Stay safe and healthy
thanks for putting our video on your channel
Those bikes are litttt
Nice work! ☮️
It's alway a pleasure to hear from you Michael thanks for your support
Great job man
Thanks thanks Harry we use it all the time
Me viene de categoría este vídeo porque voy a fabricar uno la máquina entera con pantalla LCD y todo gracias por este magnífico vídeo
Thank you so much and have a wonderful day
hash, is the gods chocolate of choice.
That top is gonna turn green🍁🥵
Very Nice! 🙌🏽
Thanks for 20 they come in handy for making a lot of different cannabis products
@@johnnysgreenextractions8144 Nice I'm so glad I sub'd u I like ur direction, stay frosty my growbro!✊🏽
Such awesome videos! For best results playback at 1.5x speed 🤣😂❤
New to your channel, this video got me to subscribe.
Welcome aboard and thank you so much Frank
As an electronic technician, this is awesome.
Thanks for the kind, comment jimmi
@@johnnysgreenextractions8144 thank you as well, Sir.
Nice!:D
And for one sec, I saw Robin Williams:(
Nice one bro 👍 🇬🇧
Good day Brother
So fuckin awesome
I gotta make one for myself
I got a rotisserie motor for a bbq I think would work great.
Good job 👏🏻
Excellent let us know how it goes
I got a question, dose it ruin the buds that are put into it or do they still look good after?
Hi Kam it destroys them as your products should be bone dry or Frozen when you're tumbling the more you tumble the more you end up with crumble
How much trim did you run to collect that many trichomes? That's a nice amount you collected something tells me you didn't sift an ounce or so? Or do you throw in small buds also
Hi Steven We never Weighed it yes there was more than an ounce in there and there is a lot of small bud in there also That's cream Barrel can hold quite a bit And within 5 minutes you've got loads of trichomes
@@johnnysgreenextractions8144
Sorry about all of the questions but did you freeze the trim to help them break off or is it just the saved dried trim?
@@stevenallen9592 No problem buddy we're here to answer all your questions We used dry Some people will actually run a tumbler in a freezer I'm suspecting freezing your drum might be better Either way should be fine
The silkscreen can be done another way so you don't have to take out the cylinder to fill/empty it: put velcro on the edges of two wood discs and on the edges of your silkscreen. Where the silkscreen meets itself after one revolution you put a line of velcro spanning between the two wood discs, half on each side of the silkscreen. This lets you open the cylinder (like opening a big cylindrical bbq) without having to take it out of the bin. The benefit is you don't get any mess on the floor until you are ready to clean out the whole tumbler.
Hey Rob. Thanks so much for leaving such an excellent comment tips like this really helps the community
excellent!
:-)
Hey CG thanks for the comment we will be coming up with a hash video in the next three to four weeks where we use the tumbler
@@johnnysgreenextractions8144
i am going to try to make one, i doubt it will be as good as yours though however, i just want to make some quality hash!
:-)
Selling any ?
@@saskmike71 i don't sell
I think maybe using wood as the support beams through it would be best as then you could have the wood stick out right to the edge where you could then stretch and staple to that centre section as well getting the screen fully taunt as you would see on commercially made units
Edit - seen the second part about it now lol that way that you have is actually really cool idea for stretching too!!
Hey Dillon thanks for watching and you have yourself a great day
Where can I purchase pollen?
Johnny i was wondering is the plant good for anything after u tumble or do you disregaurd it?
Hi Phil We discard it as there are no more thc crystal or trichome left on the plant material.
Phil Smith, I Have Seen Some that will Blast it After Their Tumble.. Then they will Burn in their Cannabis Burn Pit... Getting Rid of it for Good, and or Trash it ..
@@greensnapper1602 with 110 you can still go lower in micron or blast it indeed or use for cooking or oil.
@@mulacula9540 yes we know if you want more kief.. or for hash.. But was talking about Blasting.. Thanks for commenting...
And now we are carpenters. Lol. Love your vids.
Thanks so much for leaving a comment and please drop by again
@@johnnysgreenextractions8144 I like your vids. Your open and Honest. Shows. He well 😊
How we do it👍
Do you sell them?
Drops ash on the screen , dang it 😂
Awesome machine though thanks for sharing
Thank you very much for this video! Finally someone made an easy to follow video. I do get stuck at the electric part.. what kind of motor is that? How much rpm it goes and what would be the ideal rpm? How you connect the motor? Could you explain this part abit more detailed please🙏
Not sure on the RPM you don't want it to quick so that a centrifical force is created where everything is sticking to the sides you want it to Tumble in there the motor was bolted right to the tub we just picked up the motor at a little shop that sold miscellaneous parts
@@johnnysgreenextractions8144 thank you so much for your reaction! And you connect it directly to an AC supply? Without transformer?
The one we ran across was strait plug into the wall
@@johnnysgreenextractions8144 so I should really find out what motor you use because most dc motors you cant vonnect directly.
Just had to look and it doesn't have any markings just try to get the small one that be able to plug right into the wall
Did you put flower, shake or trim in?
Next, what was that weight?
Then what was the weight of the pollen you recovered? Thank you.
Hey Charles sorry we very rarely weigh anything you can see this tumblr in action on a couple of videos how to make hash and pollen CO2 extraction in this video we show you the tremendous difference in quantity using dry ice inside the tumbler these videos will be in our playlist under concentrates have a smoking day
@@johnnysgreenextractions8144 I've watched a few of your videos, I seen the dry ice brung back more weight. Good channel and information, keep up the good work.
can umake a diy at home soup can or pop can sifter box with a drill or for thoes with out much other the kief/pollen box
Hi Ryan that is a great idea we'll see what we can do in the future for you
🤙👍👍👊
Thanks Lance
BBQ rotisserie work great to power tumbler. The BBQ brackets can be purchased cheap, one set for the BBQ, one set for the tumbler. Chickens in the summer, tumble an appetite at harvest time. Just sayin.
Nice fabrication work !
I like your idea
Intriguing. I am impressed by the whole thing but very confused by choosing to paint the wood. I would rather have wood particles in my kief than paint. Over time.
Good call there's always room for improvement with everything
Here’s a good tip. Buy your tote first and make your wheel so it fits inside it.
I need pollen bro
now you fill it up and put in chest frezzer and go to town .i would do killer bud allso goot job aloha from big island
Honi to all our friends on the big island
i've seen one of those (smaller one) on walmart for like 49$. they're long gone, but i found the same exact model on another website selling those tumblers now for a 10x markup...
Interesting what was the Tumblr used for originally the one at Walmart for 49
@@johnnysgreenextractions8144 The shape of the box looks exactly like the one you can see in this video: th-cam.com/video/XmYtwfgbzF4/w-d-xo.html
its always this gray colour with the added features to the box, the plastic where the tumble box sits in is also the same. ive seen those in different sizes
nice right !
If I ever need muscle I'm going to call you you handle those nunchucks beautifully
Try adding dry ice to the mix it should work a bit better as far as separating the keif other than that nice jerb man.
That's a great idea my friend thank you
How come you don't post anymore?
Hi 7 10 I am going to post this weekend. We had a health issue in the family
@@johnnysgreenextractions8144 I'm sorry to hear about that! I hope you and everybody in your family are doing okay! Looking forward to seeing future videos peace and love
The only boomer i respect
thanks Cosm11ck
How much would you charge to build one?
wish we were neighbors..lol
Sorry Rick just don't have the time my friend
@@johnnysgreenextractions8144 all good...just keep on shaken..lol
Id cover the threaded rod with surgical tubing,so they don't get caked with pollen
That's a good tip thank you my friend stay tuned
Brother, may I have your email to talk about affiliate program? We published newest leds and need tester
Hi Wright you can go to www.johnnysgreenextractions.ca There will be an E_Mail at the bottom of the page.Lets talk
Hey hit me up and I will show you how I built one and and a couple of extra changes…
I use electric window motors from vehicles. There are gear reduced and extremely torquey. As well as a 120v to 12v step down power supply and a speed controller. All of which is stupid cheap on Amazon.
Matthew that is an excellent idea people will like that one thank you bud
Do you know the amps needed to run a small window motor? I'm trying to find the right power supply to make this thing. Thanks!
Use a plastic barrel cut a square big enough to make a lid to enclose the tumbler. Lay on side to tumble.
Mark, Good Idea But Think a lot of it would cling to the sides of it... Almost like Static Electricity ... But we need to Think of Something Good Since they are Not Cheap to Purchase.. Happy Holidays To You Sir.
just sent ya a E - Mail Thanks Guys !!
Grill rotisserie motor 15 bucks
Nice man, I’m in the process of building something similar. Curious of what sort of motor you use?
Where I live here in Winnipeg Manitoba we have some stores that have surplus stuff, motors things like that. I went there and found a suitable one, but there’s a lot of things you can use to turn the Tumblr.
Salad spiner..
Spend a few dollars for bearings
Every stoner ever, turns into Mac Gyver at some point:
Dude we are out of papers
ok get me a toilet paper roll, some tin foil, and a corkscrew
Hey man we dont have a corkscrew
Alright then get me an avocado, an ice pick, and my snorkel, trust me bro Ive made bongs with less.
That is too funny and brings back so many memories our dad used to be a plumber so you can imagine what we used all as plumbing fittings for lol
@@johnnysgreenextractions8144 For sure man I am no stranger to the brass elbow fitting for a bowl lol
Red stripe stubby.
That is our favourite it always reminds us of Jamaica and hanging with our friend the Cannabis Cup winner the king
@@johnnysgreenextractions8144 it's my go-to. Much better than the rest. I try to get the stubby bottles if I see them.
Just E mailed you NO RUSH On Videos Guys Totally Understand !!
Can you make me one I can pay you for it?
We are sorry we are just too busy
Love the idea but you need a script.so much uh and so
2x speed and he still talk slow
Brilliant show...but please stop saying "taunt".. it's taut
Paulie grammar is definitely not our Forte lol
@@johnnysgreenextractions8144 lol.cheers Johnny 😁👍
Good information. But this video could've been done in 10 minutes if he didn't get absolutely roasted before hand.
Hi Lloyd thanks for dropping by don't want to disappoint you but we have probably been roasted since the mid-70s lol
Its taut not taunt your not making fun of the tumbler are ya lol sorry couldn't help my self.
Hi Brent we've made a lot of English mistakes on our videos we make light of the situation in her too much smoke and no joking bloopers video all I can say is English is not our lol
@@johnnysgreenextractions8144lol I didnt realize that my bad. But great video tho that is an awesome sifter
Great video showing what to do/how to make a tumbler.
The only advice I have is maybe try not to ramble about some of the info that is not necessary as it makes the video kind of hard to not want to fast forward through while watching
All this work no thanks I just bought a $25 raffle tumbler and wrapped som screen around it and done 👍