you can lose the parchment piece your holding and just use your glove.. its much more effective.. because two things are happening in this video.. you want to charge the resin statically. but you also want to force contaminant thru the tighter 200LPI mesh screen.. Once that is done, you have the magic.. Use your hand and run it in a circular motion and you will find this work will get done much quicker and the resin will be even purer. :)
If you’re rubbing your hand over it to push contaminant through wouldn’t it also push the trichome heads through? Wouldn’t see why not considering heads are WAY smaller than contaminate
Thanks for your comment. The triboelectric charge on the parchment when measured with an electrostatic meter was 4 times greater than on the glove. Both items hold different charges and serve different purposes. We use the differences in charge potentials to accomplish different goals.
At different mesh sizes progressively smaller heads make it through. The mesh serves as a means to separate heads from stalks and to tribocharge the particles.
@@SamboCreeckFiltration everything charges in the resin.. so the glove is better at pushing the resin thru while creating the charge needed to get just the heads to stick to the glove. ( I have been doing this almost ten years ) The triboelectric charge is less important than you may think. Its the combination of pushing material thru the screen and charging it that makes this process magic :)
@@SamboCreeckFiltration the problem with that theoretical is that both stalks and heads charge the same.. the reason this process works is not just the charging.. its the PUSHING OF CONTAMINANTS THRU THE TIGHTER HOLED SCREEN. this is why this is such a unique process
I watched an afgan hash making video and that's basically what they were doing. Two paddles moving the material back and forth and creating a static charge in the paddles and every once in a while they'd remove the trichomes into the collection vessel. This was the high end keeper pile and the lower quality kief fell through.
Just wanted to point out that you can buy static-free brushes. They use a small strip of polonium to disperse the static charge and the radiation is actually harmless unless you manage to swallow the polonium in which case it can kill you.
Sifting it works but I also use the Smokenbull bump, You can use a rolling trey or any light weight movable surface, Tilt the trey a little and tap to top of it, Move the material to the top, You can separate seeds or sticks or stems from your herb the same ways, Gravity and vibration can cause things to more uphill against gravity! Experiment with it, The Smokenbull bumb was converted to herb from gold pan separation by a man they called The Buzzard! GPAA founder! It works on weed to, but it can also separate light partials on a level no screen can do... After all the screening use the Smokenbull bump! It works! I'm old...I know things lol😊 🔥 🐃 Aho.
So you're basically planting trichome stalks into the bottom mat using opposing electrostatic charges, then "Cleaving" the heads off, collecting, and repeating the process. I would assume that friction and the heat from your hand would cause the material to start rolling up. How does this not happen?
Not all stalks fall through the mesh, most don’t. We separate by static after the decapitation process. The balling up depends on temperature, humidity, and technique. It takes a bit of practice.
Vamos 🔥 You change my perception of dry sift i love those techniques you re so passioned and really make a great job Great inspiration HR 30% and 12°c for do that ?
For the love of the plant. New Study Shows Clinical Evidence of the Entourage Effect as D-Limonene Mitigates Anxiety in Combination with THC. Thanking all growers breeders cultivators lovers of the master plant. She breeds passion and homeostasis cb2 receptor inhibits sars2. Ganja is a medicinal treasure trove with many secrets peace and love
That sound of the material on the screens is the ABSOLUTE FUCKING BAIN of my existence but im gonna watch this entire video because this shit is fuckin cool😂
What's the mesh , or screen size you went back to at the end ...? 50 .The yellow is to your left , and your reworking on the right with the last part .
You mention to choose the right brushes,but you don't say what brushes you are using. We are watching your video to learn something but most of you guys never say what tools you actually use or explain screen sizes you might have mention them but didn't explain what the order is of scree to be used. Just alot fast forward. Thanks, any way for your video
Go to a hardware store and pick up a few. Whatever I recommend, surely they won’t have somewhere. Have some fun and do some research. Let us know what worked for you!
First wanted to say thank you for creating such informative and in depth content! I am very grateful that I can find people like yourselves willing to share your knowledge on something I am so passionate about. Had a quick question for you as I don't think I caught this info, but I may have missed it. What is the age of your starting material that you are using and roughly what is the relative humidity (RH%) of the material when you are dry sifting it? The reason I ask is if I have a very resinous starting material that sticks to your gloves/fingers simply from touching it and its at ~58% RH, do I want this to be much drier? However, my concern is that by drying it out more, I would be losing/damaging some of the terpenes and trich heads, or is that not the case? Anyways, thank you again and I appreciate in advance your time!
Hi, i have a question please. Im trying to make static but the problems i face is sometimes i catch heads but fewer and i can see some contaminants are catched too( broken pestils...) sometimes i see clean heads, but next roll i dont catch nothing, i remarked also that i need to change the part of the glove that been using to rub then i can catch something, sometimes the glove is useful only 1 or 2 times. Then i cant catch nothing. Sometimes i catch only contaminants and i found no heads. What is my problem? I appreciate ur answer And if u have an IG page i would love to follow you
So this whole time you’re pushing the contaminants into the screen while using static electricity to pull the keif back off if the screen so you aren’t scrapping the contaminants back off? What screen do you start with and how far do you go?
I’m looking to process my own matcha tea for my business. Electrostatic is used to separate stems from the soft tissue of the leaf. Do you think this process in the video could be applied to remove stems from leaves? The stems have a negative charge while the soft tissue has a positive charge.
It's possible. It's something that has to be tested, which wouldn't be hard at all. Doing this by hand is easy but not scalable. I'm not familiar with the matcha process to remove stems, I'd love a link if you have it. DM on IG or our website if you want to discuss further.
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
I have a question, please. I have an Egyptian hemp plant, but after drying it and sifting it, it does not stick and remains dust. How can I make it a narcotic hashish? Please reply.
May I ask if this will work for dried ice hash? Thats beyond hair. It is plant material broken down to powder from the cold, then mixed with the trichomes.
Do you have any advice on a shopping list for this method? I have the screens, but I'm curious about the types of brushes and the different gloves being worn. Any guidance on purchasing the right equipment would be much appreciated.
what am I watching Im so confused I got from the photography side of youtube (searching for trichrome stuff) so erm... hi whatever niche side of youtube this is I am so confused
Great info, but that camera work with the focus changes and moving between shots is straining on the eyes and like watching some sort of footage taken by someone filming Bigfoot.
Whew I just sifted a half pound of trim and wound up with mostly sift that went thru the 275µ work screen, barely anything thru the 175µ and 75µ. Would this work on trash hash that's mostly containment? I figure with over 30g of it it's worth a shot. If I come away with even a few grams of decent sift for rosin, it will have paid for the screens and supplies. I don't use edibles so green dragon is out.
@@SamboCreeckFiltration Cool man, glove tech is plan A... plan B press and hope for the best... plan C it's crappy rosin but maybe I'm lucky and the consistency is prime for mechanical THCA separation, green dragon still plan D lol. Sifting screens and other gear en route, won't be a loss if this doesn't pan out. Will be an upgrade over the Rosineer box and it will likely get some future use. Genuine thank you for the insight/info, as I was not aware of that issue; most of hashing is find out as you go so it helps to be even one iota more prepared!
@@SamboCreeckFiltration Update: 40g of junk sift and glove tech got it down to a little over 8g of decent sift and just over 1.5g of slightly better sift, along with over 10g of assorted stuff that fell thru the screen and non-green that I scraped off the screen. I just wiped and repeated putting my hand on a cold plate, until there was little to nothing staying on the gloves. Most important part was wiping the screen down after each interval... I wonder how that much green was invisible to the naked eye. It was pretty encouraging when my sift started looking better under the mic after each pass--I did 3 rounds of it altogether on each grade. Worth it for the education alone, and a much better sifting setup. Tomorrow is the moment of truth when we press. If it's not green or dark and it's even a hint of yellow, I may have to curb the excitement to avoid disturbing the peace. Might disturb the peace anyway if the results are good enough! Thank you again.
Any dry sift screen works. Go to any hardware store and buy a bunch of brushes. As much as I’d like to recommend something, they may not sell it where you live or make it in a slightly different material. Everything used is super cheap so buy different items and test. Well worth the learning experience. The technique is more valuable than the equipment I beleive.
Nothing is lost really. We make bubble hash because we don’t want flower. Trichome heads are where all the fun stuff is at. Stalks are contaminants that mostly add waxes. Volume wise yes there is less but quality wise, stalks débase your hash. It’s all about perspective. I personally like flower.
@@SamboCreeckFiltration thx for quick answer. You will show this machine on TH-cam ? Or you sell? I would be very interested. Would be glad if we could get in contact.
Somewhere Between 10 and 20 % of what material you start working whit depends on the strAin and how clean you make it , but you would defently not aim to get more then maybe 15%
@@pandapukeeefight4739 That of course will vary and our numbers won’t really help you. The takeaway is that this isolates heads which contain the vast majority of cannabiboids and terpenes. That being said, a significant amount of weight is stalks so you will see a big drop in overall yields. However there just isn’t much in the stalks anyways. The sacrifice in total weight is well worth the increase in quality.
@@SamboCreeckFiltration but letts say I have good trim with a lot off trichomes. It will be worth my time. I want to make bubble or dry sift and than press it to rosin
The end result is worthwhile if your starting material is not the best. It's also a great way to separate heads from stalks. We are working on an automated version of this process for large labs.
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
Have you ever spent days or weeks trying to achieve a 99.8% purity? I'd say all you "hash makers" have multiple times. lol Who has achieved the highest percentage pure, amongst you professionals? lol Been studying for days now, trying to construct makeshift screens or find another way to pull contaminants without screens. Is there another way? I didn't want to pull out the washing machine. lol
@@SamboCreeckFiltration I hope one day we can meet, I am not too far away from Italy if you guys are there too 🙏🙏🙏🙏 it is veryyy diffiult to find similar minds who are on this train of thought espeially in Europe...
@@SamboCreeckFiltration Oh yeah nd I'm also in Los Angeles a lot but lately I have been in Europe way more. There is a lot to do here more fun than in LA where everything is saturated and nobody is open for any disussion other than the tightest fastest growing nugs for the cheapest lol... so many PGR boofboys there, I feel like we have the future here in Europe, I feel like italians are the most passionate hash makers too lol.
Ah, we manufacture in Arezzo, Italy but live is sunny Miami Florida. We fly to Italy twice a year since we make our sieves, filters, membrane filters, pumps and the bubble hash in Italy.
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
In the video we are trying to show the process of triboelectric separation of heads. Carding ads a specific charge that would disrupt the process. Stems will damage your screens.
you can lose the parchment piece your holding and just use your glove.. its much more effective.. because two things are happening in this video.. you want to charge the resin statically. but you also want to force contaminant thru the tighter 200LPI mesh screen.. Once that is done, you have the magic.. Use your hand and run it in a circular motion and you will find this work will get done much quicker and the resin will be even purer. :)
If you’re rubbing your hand over it to push contaminant through wouldn’t it also push the trichome heads through? Wouldn’t see why not considering heads are WAY smaller than contaminate
Thanks for your comment. The triboelectric charge on the parchment when measured with an electrostatic meter was 4 times greater than on the glove. Both items hold different charges and serve different purposes. We use the differences in charge potentials to accomplish different goals.
At different mesh sizes progressively smaller heads make it through. The mesh serves as a means to separate heads from stalks and to tribocharge the particles.
@@SamboCreeckFiltration everything charges in the resin.. so the glove is better at pushing the resin thru while creating the charge needed to get just the heads to stick to the glove. ( I have been doing this almost ten years ) The triboelectric charge is less important than you may think. Its the combination of pushing material thru the screen and charging it that makes this process magic :)
@@SamboCreeckFiltration the problem with that theoretical is that both stalks and heads charge the same.. the reason this process works is not just the charging.. its the PUSHING OF CONTAMINANTS THRU THE TIGHTER HOLED SCREEN. this is why this is such a unique process
This is insane it's so fascinating to me. Such dedication to the craft. Really appreciate you putting this content out there.
I watched an afgan hash making video and that's basically what they were doing. Two paddles moving the material back and forth and creating a static charge in the paddles and every once in a while they'd remove the trichomes into the collection vessel. This was the high end keeper pile and the lower quality kief fell through.
Awesome video. You answered a lot of questions I had earlier today trying the screens for 1st time. Thank you
Glad it helped
This is what madness looks like
Just wanted to point out that you can buy static-free brushes. They use a small strip of polonium to disperse the static charge and the radiation is actually harmless unless you manage to swallow the polonium in which case it can kill you.
i just managed to make 11gram 160u sift and press it into a lump and make a joint while watching this interesting video... so dedicated ❤
Great video yaI’ll. Thank you for your contribution to the cannabis space. keep up the good work.
Much appreciated!
Great work🔥 Would love to see a cold cure tutorial for the finished product
Уважуха!!!!!! Успехов в этом деле!!!!!!! Ветеран бд Андрон. Курите братья!!!!!!! Ветеран бд Андрон
HIGHLY regarded work ser
Wow alot work ill dab my rosin super light yellow n sooo easy but id luv2 try your product it may be worth work👍😁😎
Great great video
Thanks for sharing 🙌🏼
Much appreciated!
@@SamboCreeckFiltration I think this video will go viral amongst the canna community soon as ppl come across it
Pain Troller. Awesome typ-O
😂
Sifting it works but I also use the Smokenbull bump, You can use a rolling trey or any light weight movable surface, Tilt the trey a little and tap to top of it, Move the material to the top, You can separate seeds or sticks or stems from your herb the same ways, Gravity and vibration can cause things to more uphill against gravity! Experiment with it, The Smokenbull bumb was converted to herb from gold pan separation by a man they called The Buzzard! GPAA founder! It works on weed to, but it can also separate light partials on a level no screen can do... After all the screening use the Smokenbull bump! It works! I'm old...I know things lol😊 🔥 🐃 Aho.
We are jonsing till 10am going to try to make some tomorrow
So you're basically planting trichome stalks into the bottom mat using opposing electrostatic charges, then "Cleaving" the heads off, collecting, and repeating the process. I would assume that friction and the heat from your hand would cause the material to start rolling up. How does this not happen?
Not all stalks fall through the mesh, most don’t. We separate by static after the decapitation process. The balling up depends on temperature, humidity, and technique. It takes a bit of practice.
Vamos 🔥
You change my perception of dry sift i love those techniques you re so passioned and really make a great job
Great inspiration
HR 30% and 12°c for do that ?
does it work with dry ice method?
Nice video Bro !! Thanks for share
420☠️
For the love of the plant. New Study Shows Clinical Evidence of the Entourage Effect as D-Limonene Mitigates Anxiety in Combination with THC. Thanking all growers breeders cultivators lovers of the master plant. She breeds passion and homeostasis cb2 receptor inhibits sars2. Ganja is a medicinal treasure trove with many secrets peace and love
cool technique
Many thanks!
That sound of the material on the screens is the ABSOLUTE FUCKING BAIN of my existence but im gonna watch this entire video because this shit is fuckin cool😂
So much effort in production. Why not just smoke buds?
Because when you. Smoke buds ,you smoke a lot plant matter, in that way you smoke ONLY thc chemical
Why not use something to vibrate the screen to move it, instead of using your hands in the material?
Check out Tribo Tuesdays playlist where we are discussing this very question.
How many times u roub before change glove?
What about a pre-charged roller underneath that you can set the speed, set how close and change the polar charge?
What's the mesh , or screen size you went back to at the end ...? 50 .The yellow is to your left , and your reworking on the right with the last part .
Check out the sizes on our website.
Did someone finally figure out Sams secret tech? lol
A lil late on here , BIG QUESTION , will cleaning my dry ice hash like this work? Or is dry ice “too damaging to the trichs”
For various reasons it’s very hard to build up a charge on kief. It needs 20x more power to work. That leaves you with a machine as the only option.
You mention to choose the right brushes,but you don't say what brushes you are using. We are watching your video to learn something but most of you guys never say what tools you actually use or explain screen sizes you might have mention them but didn't explain what the order is of scree to be used. Just alot fast forward.
Thanks, any way for your video
Go to a hardware store and pick up a few. Whatever I recommend, surely they won’t have somewhere. Have some fun and do some research. Let us know what worked for you!
They reg paint brushes ya can see that🤦♂️🤣
Welcome to bro science, lol
😂😂 I liked that wee ohhhhooohhh at the end 😂😂 I'm wasted 🥴
Could a strong enough vibration be applied via machine to the screens to agitate the trichs down the various layers, no handling involved?
Yes. Vibration does cause triboelectric charging however, so aglomeration may occur.
First wanted to say thank you for creating such informative and in depth content! I am very grateful that I can find people like yourselves willing to share your knowledge on something I am so passionate about.
Had a quick question for you as I don't think I caught this info, but I may have missed it. What is the age of your starting material that you are using and roughly what is the relative humidity (RH%) of the material when you are dry sifting it?
The reason I ask is if I have a very resinous starting material that sticks to your gloves/fingers simply from touching it and its at ~58% RH, do I want this to be much drier? However, my concern is that by drying it out more, I would be losing/damaging some of the terpenes and trich heads, or is that not the case?
Anyways, thank you again and I appreciate in advance your time!
Some sticky material just can’t be sifted unfortunately. Temperature should be colder than 50F preferably. RH of the environment should be 40-60RH
@@SamboCreeckFiltration thank you so much for getting back to me. Greatly appreciated!
Hi, i have a question please.
Im trying to make static but the problems i face is sometimes i catch heads but fewer and i can see some contaminants are catched too( broken pestils...) sometimes i see clean heads, but next roll i dont catch nothing, i remarked also that i need to change the part of the glove that been using to rub then i can catch something, sometimes the glove is useful only 1 or 2 times. Then i cant catch nothing. Sometimes i catch only contaminants and i found no heads. What is my problem?
I appreciate ur answer
And if u have an IG page i would love to follow you
Wow...really great, but i need it german😢
So this whole time you’re pushing the contaminants into the screen while using static electricity to pull the keif back off if the screen so you aren’t scrapping the contaminants back off? What screen do you start with and how far do you go?
Check our newest videos with better explanations.
I’m looking to process my own matcha tea for my business. Electrostatic is used to separate stems from the soft tissue of the leaf. Do you think this process in the video could be applied to remove stems from leaves? The stems have a negative charge while the soft tissue has a positive charge.
It's possible. It's something that has to be tested, which wouldn't be hard at all. Doing this by hand is easy but not scalable. I'm not familiar with the matcha process to remove stems, I'd love a link if you have it. DM on IG or our website if you want to discuss further.
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
We can clean a kilo per hour. So enough I would say. Also depends on how dirty it is to start.
Like beard hair falling out wherever you go.Nice.What use is a beard anyway?
I have a question, please. I have an Egyptian hemp plant, but after drying it and sifting it, it does not stick and remains dust. How can I make it a narcotic hashish? Please reply.
Sounds like you need to get a different cultivar to work with, hemp plants will produce little to none of the cannabinoids and terpenes your after
List of supplies please? From the different brushes to the plastic scraper and different gloves. Also, are you using a specific parchment?
I suggest a bit of trial and error.
May I ask if this will work for dried ice hash? Thats beyond hair. It is plant material broken down to powder from the cold, then mixed with the trichomes.
Yes it does work. Watch the triboelectric Tuesday series in this channel to learn the basics of separation.
Do you have any advice on a shopping list for this method? I have the screens, but I'm curious about the types of brushes and the different gloves being worn. Any guidance on purchasing the right equipment would be much appreciated.
Reach out to @tanhat710 on IG. Or just try a few brushes you find at the local hardware store. You may find something that works better!
what am I watching Im so confused I got from the photography side of youtube (searching for trichrome stuff) so erm... hi whatever niche side of youtube this is I am so confused
Red pill but looking for the blue pill? Or viceversa?
Hello, where can I buy the polymer brushes please?
The composition is not always written on amazon
Tks
We have a kit on our website. Consider supporting our work by buying from us.
the cam seems upside down and it messes with my brain...
Great info, but that camera work with the focus changes and moving between shots is straining on the eyes and like watching some sort of footage taken by someone filming Bigfoot.
😂
What are those screens your working on?
They are used on the screen printing industry. Also used for dry sift. Plenty companies sell them.
Whew I just sifted a half pound of trim and wound up with mostly sift that went thru the 275µ work screen, barely anything thru the 175µ and 75µ. Would this work on trash hash that's mostly containment? I figure with over 30g of it it's worth a shot. If I come away with even a few grams of decent sift for rosin, it will have paid for the screens and supplies. I don't use edibles so green dragon is out.
When sifting by hand it can be hard to build up particle charge when few heads are present. However I encourage you to try it!
@@SamboCreeckFiltration Cool man, glove tech is plan A... plan B press and hope for the best... plan C it's crappy rosin but maybe I'm lucky and the consistency is prime for mechanical THCA separation, green dragon still plan D lol. Sifting screens and other gear en route, won't be a loss if this doesn't pan out. Will be an upgrade over the Rosineer box and it will likely get some future use. Genuine thank you for the insight/info, as I was not aware of that issue; most of hashing is find out as you go so it helps to be even one iota more prepared!
@@SamboCreeckFiltration Ah and try we definitely will, nothing to lose
@@SamboCreeckFiltration Update: 40g of junk sift and glove tech got it down to a little over 8g of decent sift and just over 1.5g of slightly better sift, along with over 10g of assorted stuff that fell thru the screen and non-green that I scraped off the screen. I just wiped and repeated putting my hand on a cold plate, until there was little to nothing staying on the gloves. Most important part was wiping the screen down after each interval... I wonder how that much green was invisible to the naked eye. It was pretty encouraging when my sift started looking better under the mic after each pass--I did 3 rounds of it altogether on each grade.
Worth it for the education alone, and a much better sifting setup. Tomorrow is the moment of truth when we press. If it's not green or dark and it's even a hint of yellow, I may have to curb the excitement to avoid disturbing the peace. Might disturb the peace anyway if the results are good enough! Thank you again.
Send us pics on Instagram. We would love to see the end product!
That’s how I winnow my wild rice lol
Hello, newbie to this process, how or where do you buy the necessary equipment to static charge things for this method other than brushes?
Any dry sift screen works. Go to any hardware store and buy a bunch of brushes. As much as I’d like to recommend something, they may not sell it where you live or make it in a slightly different material. Everything used is super cheap so buy different items and test. Well worth the learning experience. The technique is more valuable than the equipment I beleive.
je fait aussi du cchichon avec un pièse maker avec un logo dessus
It seems like their loosing a lot. I think bubble hash is a better way to go.
Nothing is lost really. We make bubble hash because we don’t want flower. Trichome heads are where all the fun stuff is at. Stalks are contaminants that mostly add waxes. Volume wise yes there is less but quality wise, stalks débase your hash. It’s all about perspective. I personally like flower.
what no panning like when panning for gold method
😂
Is it possible to build a machine for that?
Yes. We are testing one now.
@@SamboCreeckFiltration thx for quick answer. You will show this machine on TH-cam ? Or you sell? I would be very interested. Would be glad if we could get in contact.
Check out triboelectric tuesdays playlist. And you can reach out on our website, IG or WhatsApp.
If I filter a kilo of weed like this, how much do I have left in the end( static)؟
Depends on level of contaminants. Hard to say.
@@SamboCreeckFiltration ok thanks do you have instagram
@sambocreeckfiltration
Somewhere Between 10 and 20 % of what material you start working whit depends on the strAin and how clean you make it , but you would defently not aim to get more then maybe 15%
Not enuff worth fooln with press rosin lol let it cure to tho😎👍
Hash is hash,this is drysift the start of the hash's life🤔
Thanks for your comment.
Hash made the old schoolway in morroco ain't this.
What are the rendements of this if you use good trim ?
Rendements? I don’t understand the question.
Yes it works great on any dry trichomes.
@@SamboCreeckFiltration sorry I mean how much was input and what was the Return ?
@@pandapukeeefight4739 That of course will vary and our numbers won’t really help you. The takeaway is that this isolates heads which contain the vast majority of cannabiboids and terpenes. That being said, a significant amount of weight is stalks so you will see a big drop in overall yields. However there just isn’t much in the stalks anyways. The sacrifice in total weight is well worth the increase in quality.
@@SamboCreeckFiltration but letts say I have good trim with a lot off trichomes. It will be worth my time. I want to make bubble or dry sift and than press it to rosin
Hello my frends
Dry ice and a tumbler/sifter. So much more proficient and time saving. I could never find time to do this … too little for the effort
so much work...😅
Mannnnn yall making me use my higher intelligence and i don't like it lol where're the layman's terms at?
This doesn't seem worth all that time for that little amount
The end result is worthwhile if your starting material is not the best. It's also a great way to separate heads from stalks. We are working on an automated version of this process for large labs.
Use my method...this stinks yes
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
Have you ever spent days or weeks trying to achieve a 99.8% purity?
I'd say all you "hash makers" have multiple times. lol
Who has achieved the highest percentage pure, amongst you professionals? lol
Been studying for days now, trying to construct makeshift screens or find another way to pull contaminants without screens.
Is there another way?
I didn't want to pull out the washing machine. lol
Yes there is. Plasmastatic for the win!
We need to come up with something new and much better. This is not the way forward for static !
Yes. We are wrapping up R&D to do this automatically based on some principals described here.
@@SamboCreeckFiltration Exciting!
@@SamboCreeckFiltration I hope one day we can meet, I am not too far away from Italy if you guys are there too 🙏🙏🙏🙏 it is veryyy diffiult to find similar minds who are on this train of thought espeially in Europe...
@@SamboCreeckFiltration Oh yeah nd I'm also in Los Angeles a lot but lately I have been in Europe way more. There is a lot to do here more fun than in LA where everything is saturated and nobody is open for any disussion other than the tightest fastest growing nugs for the cheapest lol... so many PGR boofboys there, I feel like we have the future here in Europe, I feel like italians are the most passionate hash makers too lol.
Ah, we manufacture in Arezzo, Italy but live is sunny Miami Florida. We fly to Italy twice a year since we make our sieves, filters, membrane filters, pumps and the bubble hash in Italy.
Butano extraction os best, cause ONLY remove tricomas heads without that much work
😢l
Meth is bad
🤣
No thanks to much work , for what????
Thanks for watching.
Doin my method while giving no credit lmfao
Hello. Thanks for your comment! I checked out your TH-cam channel and did not see anything about the triboelectric process. We would love to learn more if you have posted elsewhere about it. When we posted this video ther wasn’t much about it on the internet. We think the technique is cool and we make educational videos because we beleive the community as a whole benefits when information is open source. So please share your knowledge if in fact this is your technique.
😂😂your method, like you payed for it or did it first or some shit😂
@@nickmccurdie1214 i did do it first. The thread is still there lmfao
@@drysiftwizard3469 what are you a Child my friend ?
@@pandapukeeefight4739 lol. Cool name.
So Moroccan hash done on a better screen.
A lot of work to get baked.
He's using wrong brush he should be using a brush that doesn't attract pollen. The loss is great when using wrong equipment.
What brush should he be using???
That brush is the most worst way possible to scoop up trichomes now most trichomes are in the brissles
Stalks and trash are in the bristles. Very few trichomes. But the brush is used to clean, not to pick up.
@@SamboCreeckFiltration you should've used a card way more efficient and you can use stems and leaves for bubble hash
In the video we are trying to show the process of triboelectric separation of heads. Carding ads a specific charge that would disrupt the process. Stems will damage your screens.
@@SamboCreeckFiltration the why bubble hash is way more simplerier and efficient
Thanks for your comment.