You're awesome, bro. I "inherited" 16 phat 360s (all RROD issues), and I decided that if I'm fixing them, there's no way I'm not modding them, too. Thanks for the THOROUGH tutorials and info.
I'd love to see a revival of the emulator scene. There are decent GBA, NES, SNES, and Genesis emulators for the 360 - it'd be neat to see somebody make up a nice presentation layer like what RetroPi does.
@@AlwaysOnline2001 how’d it go? I have an old 4GB slim corona that I want to RGH. I know I need to buy a new soldering iron though because I know I’ll screw it up with my $20 radio shack soldering iron. I’m gonna buy a Hako.
@@oshtheld it’s very straight forward, sadly I was stopped because the tiny spring loaded pin in the post fix adapter fell off, delaying the process. Only thing you’ll really have to worry about is bridging really small points I found it easier to just lay a wire between these points and tack it on both sides lol Make sure you use plenty of flux and don’t hold your heat too long, you’ll get the feel Follow WMs videos, he has excellent tips
WARNING!!! x360 Ace V5 when installing c1 and c2 points There is a danger of removing the resistor. Do not work with a lot of solder on the soldering iron. I transplanted a resistor from the donor's body. At that time, I measured the value of the resistor. The left side of c1 is 33 ohms and the right side is 50 ohms. c2 was the same value as c1. If you have lost the resistor like me, please refer to it.
I had to use a postfix on the Corona E 4GB I did a couple days ago. Its the first time ive had to use one in couple years. It works wonders with RGH 3. Have you tried out RGH 3 yet? Would love to know your thoughts and maybe a guide for PHATs and Slims, Weekend style
I have your mini USB tool with an Ace V3 chip. Should I select CR4, RGH or SMC+? Your vid and comments from Octal450 are all saying SMC+ is the recommended option. But I'm not too sure
Hello everyone, I've accidently burned two resistors where C1 and C2 wires supposed to be soldered. Does anyone have the values of these resistors or can I just jump them with wire?
Hey Aaron, If you had any issues with SMC+ on the V5, could you explain more about what it did? I had someone else test them as I have no V5s, but if it doesn't work I'd like to make sure that's noted. Its designed compatible with the S-RGH firmware. Also glitch2m is not for most people, only for some people in specific cases.
Could I follow this video for my 4GB Corona that doesn't require a postfix adapter (I can see that the traces are present between the heatsink fans) or do you have another video for that?
Thank you for a wonderful tutorial video. Everything explained in detail, i love it! I have ordered all I need, and will do this mod on my Corona v4 in a few weeks or so. :) A question about soldering temperature.. I usually work with around 380 degree celcius (720 fahrenheit). But I suspect it's too high, as I have lifted some pads here and there (not on Xbox'es). Is there a sweet spot temperature, you can recommend? :) I use lead based 63/37 solder.
2011 corona 4gb rgh with ssd = best xbox 360 gaming you can experience, i have a trinity myself but corona v1 is also great. Any 1 trying to look for an xbox id suggest go with the 4gb version as it's cheaper and you can get an ssd for $30 then its gonna be great
yo when i bought a 4gb reader usb the one u used it didnt come with the chip pins so can i connect it to the actual programmer with the wires stripped i have the shit for the motherboard but not the pin header for the programmer i just dont wanna break it
Hi mister. Recently I bought a 360 Corona V4 (that was never opened before) and decided to RGH it. I installed the Ace V5 following your video and it worked perfectly with really impressive boot time. Unfortunately for some reason with 20 days after the procedure the console started to take a really long time to boot (usually 5-10 minutes to boot) and beyond that the console occasionally had problems with freezing and showing some artifacts. Do you have any idea of what's happening and what can I do? I'm afraid maybe this could be a tough problem to solve, but I have no clue. Greetings from Brazil 🇧🇷
hey bro, greetings, it is not usual but I have a situation, with a slim e (v6 toshiba) when it starts there is no problem, but there are times that while trying to start the fan accelerates and turns off, there are those who say than removing the resistor R1R1 or making a bridge between it and gnd. It is said that these plates sometimes have this problem. Has it happened? how did you solve it? You know I ask you since everything I do is thanks to your videos and this time I don't know what to do, thank you very much for your time and prompt response, greetings from Ensenada bc mex.
Interesting that instead of booting xell, it boots to the stock dashboard. for some reason it's writing back nanddump1 back vs ecc. I'm using a muffin cr4 instal with a matrix v3. yes, ecc is verified as the source
So I had an unfortunate accident today while attempting to clean up my soldering on C1 and C2... I unintentionally desoldered one of the resistors at C2, the resistor stuck to my iron and burned before I could grab my tweezers to get it off and so I bricked the board :(. Now I have to hunt down another cheap 360 s.
I have a 4GB Corona with corrupt NAND, unformatable storage. So I understand the only way to fix it is by soldering a replacement 16MB NAND. Right? Because 4GB NANDS are read with SD card tools, has anyone tried to replace the NAND firmware with an actual SD card soldered to the SD points? Again, can I write an ECC glitch file or build file directly to an SD card and wire the SD card in to the Corona motherboard to replace the bad NAND chip. I can't find anything online of anyone trying this.
I've never seen anyone convert a 4gb corona to using an SD card as the nand, seems unlikely to me... But you are correct that there are tutorials out there for converting a 4gb Corona with a bad nand to a 16mb Corona but it's quite an advanced install and based on the cost of a 360 console not really worth the effort to me personally.
Thanks for a great tutorial! In my Jrunner I got something called XDKbuild under the SMC+ option. Should I leave it checked while making the ECC and XeBuild files?
Nevermind, I had the wrong kernel selected. My first console ever, an E-series corona 16mb is soon finished, thanks to TheWeekendModder. Will try for those pesky C1 and C2 within the week but all other soldering points are done. #proudnoob
Hey man, I like your channel. I would like to ask what to do with my xbox 360. It is a trinity and already rgh before. Sadly the mod chip died. I cant boot to xell and I dont know what rgh is done here. What should I do? Also I don't have back up nand :(
For some reason I’ve ordered a 4gb usb corona programmer and got an ace v5 and ur using them in the past 2 vids When i get my consoles in this is gonna go well
@@TheWeekendModder I have a big problem I’m read nand and create ecc and write But im deleted the all files and used autogg to erase nand of Xbox Any fixes
@@darkdark2730 without an original nand dump you're gonna have to use donor files to rebuild a new nand. You'll need to write an ECC file to you console, boot cell and get your CPU key, then you can use files from a donor nand to build a new one. The console will never be able to be a retail again, and the DVD drive won't play games without more work too.
![CAMPปลิ้น | รวม Highlight 2024! PART [1/2]](http://i.ytimg.com/vi/6hnvNnvYloU/mqdefault.jpg)
You're awesome, bro. I "inherited" 16 phat 360s (all RROD issues), and I decided that if I'm fixing them, there's no way I'm not modding them, too. Thanks for the THOROUGH tutorials and info.
A new weekendmodder video?! Let’s go!!
nice good to watch your videos again you helped me do my first rgh a while ago with the content you make, keep it up!
Never thought I would see a new video again. Here we are, though.
Thanks for the very clear instructions! No excuses for not doing mine now.
You're back! Wonderful!
I love these videos. I don’t want Xbox 360 to die 😔. It already had tho unfortunately.
I'd love to see a revival of the emulator scene. There are decent GBA, NES, SNES, and Genesis emulators for the 360 - it'd be neat to see somebody make up a nice presentation layer like what RetroPi does.
Glad you are back!
Making Rgh Xbox in 2021 love it
First!! Keep up the good work man, you mod consoles better then I could ever imagine doing it. :P
Just ordered all three items needed for my 4GB Corona E. Thanks for taking the time to make and upload this. -kai
Did you do it okay?
@@itzchaos3861 doing it today actually, ill update when its done
@@AlwaysOnline2001 Ite np
@@AlwaysOnline2001 how’d it go? I have an old 4GB slim corona that I want to RGH. I know I need to buy a new soldering iron though because I know I’ll screw it up with my $20 radio shack soldering iron. I’m gonna buy a Hako.
@@oshtheld it’s very straight forward, sadly I was stopped because the tiny spring loaded pin in the post fix adapter fell off, delaying the process. Only thing you’ll really have to worry about is bridging really small points
I found it easier to just lay a wire between these points and tack it on both sides lol
Make sure you use plenty of flux and don’t hold your heat too long, you’ll get the feel
Follow WMs videos, he has excellent tips
Alright. Back in the game again. Waaazzzuuuppppp!!!!
This is exactly what I have and wanna do now. Perfect...
Me too!
WARNING!!!
x360 Ace V5 when installing c1 and c2 points
There is a danger of removing the resistor.
Do not work with a lot of solder on the soldering iron.
I transplanted a resistor from the donor's body.
At that time, I measured the value of the resistor.
The left side of c1 is 33 ohms and the right side is 50 ohms.
c2 was the same value as c1.
If you have lost the resistor like me, please refer to it.
Hey thanks for sharing those values! Was your repair successful?
@@TheWeekendModder Yes, the repair was successful.
I had to use a postfix on the Corona E 4GB I did a couple days ago. Its the first time ive had to use one in couple years. It works wonders with RGH 3.
Have you tried out RGH 3 yet?
Would love to know your thoughts and maybe a guide for PHATs and Slims, Weekend style
I have your mini USB tool with an Ace V3 chip. Should I select CR4, RGH or SMC+?
Your vid and comments from Octal450 are all saying SMC+ is the recommended option. But I'm not too sure
Hi i have corona v6 2013-12-04 nand toshiba. Chips 2x ace v5. After write nand i not boot to xell. Help please
;9
Is it fine to have the latest version firmware updated on xbox? Want to do RGH3 on Corona V3-V6
Hello everyone, I've accidently burned two resistors where C1 and C2 wires supposed to be soldered. Does anyone have the values of these resistors or can I just jump them with wire?
My corona 4gb has broke c5d13 broken trace...how to fix it?
How come I see reviews saying to stay away from a corona Xbox vs trinity or jasper?
My adapter isn't making contact even though it's slid against the CPU.
We're i can sold the point B if i don't have the post Fix?
Hey Aaron,
If you had any issues with SMC+ on the V5, could you explain more about what it did? I had someone else test them as I have no V5s, but if it doesn't work I'd like to make sure that's noted. Its designed compatible with the S-RGH firmware.
Also glitch2m is not for most people, only for some people in specific cases.
I'll do some more testing and let you know
When soldering point A I see the piece has came off anyone with info on how to repair? Can't get xell to boot and no led lights either
Could I follow this video for my 4GB Corona that doesn't require a postfix adapter (I can see that the traces are present between the heatsink fans) or do you have another video for that?
Thank you for a wonderful tutorial video. Everything explained in detail, i love it! I have ordered all I need, and will do this mod on my Corona v4 in a few weeks or so. :) A question about soldering temperature.. I usually work with around 380 degree celcius (720 fahrenheit). But I suspect it's too high, as I have lifted some pads here and there (not on Xbox'es). Is there a sweet spot temperature, you can recommend? :) I use lead based 63/37 solder.
2011 corona 4gb rgh with ssd = best xbox 360 gaming you can experience, i have a trinity myself but corona v1 is also great. Any 1 trying to look for an xbox id suggest go with the 4gb version as it's cheaper and you can get an ssd for $30 then its gonna be great
yo when i bought a 4gb reader usb the one u used it didnt come with the chip pins so can i connect it to the actual programmer with the wires stripped i have the shit for the motherboard but not the pin header for the programmer
i just dont wanna break it
You can directly wire the programmer to the motherboard, but you'll have to disconnect it each time you need to boot the console.
@@TheWeekendModder no I mean I don’t have the pin header for the programmer so can I cut of the black end of it
Yo,i have a xbox 360 slim white Corona v1 16mb nand with x360run chip but she doesn't boot,she unlimited glitching.how to fix this?
I'm french
Hi mister. Recently I bought a 360 Corona V4 (that was never opened before) and decided to RGH it. I installed the Ace V5 following your video and it worked perfectly with really impressive boot time. Unfortunately for some reason with 20 days after the procedure the console started to take a really long time to boot (usually 5-10 minutes to boot) and beyond that the console occasionally had problems with freezing and showing some artifacts. Do you have any idea of what's happening and what can I do? I'm afraid maybe this could be a tough problem to solve, but I have no clue.
Greetings from Brazil 🇧🇷
What date was yours made??
@@davkdavk why is the date of production important? Did he misidentify the model?
@@main_tak_becus6689 I was trying to identify mine
What is the header you're using so you can just re-attach programmer on the motherboard?
hey bro, greetings, it is not usual but I have a situation, with a slim e (v6 toshiba) when it starts there is no problem, but there are times that while trying to start the fan accelerates and turns off, there are those who say than removing the resistor R1R1 or making a bridge between it and gnd. It is said that these plates sometimes have this problem. Has it happened? how did you solve it? You know I ask you since everything I do is thanks to your videos and this time I don't know what to do, thank you very much for your time and prompt response, greetings from Ensenada bc mex.
Interesting that instead of booting xell, it boots to the stock dashboard. for some reason it's writing back nanddump1 back vs ecc. I'm using a muffin cr4 instal with a matrix v3. yes, ecc is verified as the source
You are not successfully writing the ECC then.
So I had an unfortunate accident today while attempting to clean up my soldering on C1 and C2... I unintentionally desoldered one of the resistors at C2, the resistor stuck to my iron and burned before I could grab my tweezers to get it off and so I bricked the board :(. Now I have to hunt down another cheap 360 s.
Damn :(
When attaching Ace V5.
The resistor on the left side of the c1 point of Corona v3 has disappeared.
I bridged with a wire, is that okay?
No. That's bad
@@TheWeekendModder OK.
Do you know the resistor value to replace?
@@kol5hyj562 no, I don't.
Hi, What is the difference between the 360 ACE V3 and the V5?
2.
But on a serious note - they're very different installs, reference wiring guides appropriate for each.
Has the 16mb Corona method changed?
I have a 4GB Corona with corrupt NAND, unformatable storage. So I understand the only way to fix it is by soldering a replacement 16MB NAND. Right? Because 4GB NANDS are read with SD card tools, has anyone tried to replace the NAND firmware with an actual SD card soldered to the SD points? Again, can I write an ECC glitch file or build file directly to an SD card and wire the SD card in to the Corona motherboard to replace the bad NAND chip. I can't find anything online of anyone trying this.
I've never seen anyone convert a 4gb corona to using an SD card as the nand, seems unlikely to me... But you are correct that there are tutorials out there for converting a 4gb Corona with a bad nand to a 16mb Corona but it's quite an advanced install and based on the cost of a 360 console not really worth the effort to me personally.
hope you'll be doing a full rgh3 video.
Thanks for a great tutorial! In my Jrunner I got something called XDKbuild under the SMC+ option. Should I leave it checked while making the ECC and XeBuild files?
Nevermind, I had the wrong kernel selected. My first console ever, an E-series corona 16mb is soon finished, thanks to TheWeekendModder. Will try for those pesky C1 and C2 within the week but all other soldering points are done. #proudnoob
I have a 360 slim model with a trinity mobo, which is also on the most recent updated version. Can this still be RGHed with the ace v5?
Yup. 100%
hi Aaron, do you ship to UK for the new 4gb SD tool.?
No we have stopped all international shipping right now due to covid screwing everything up
Hey man, I like your channel. I would like to ask what to do with my xbox 360. It is a trinity and already rgh before. Sadly the mod chip died. I cant boot to xell and I dont know what rgh is done here. What should I do? Also I don't have back up nand :(
please upload the one you use "j-runner with Extras"
Does this work with the latest kernel?
My postfix has a resistance of 124.7 ohms is that normal?
I got that, too. It worked for me :/
@@LemmeSquish ok good to hear
For some reason I’ve ordered a 4gb usb corona programmer and got an ace v5 and ur using them in the past 2 vids
When i get my consoles in this is gonna go well
Can you do a motherboard swap from a Winchester to a corona?
Sure. Swap both the DVD drive and motherboard though as they are paired.
very well explained
Can't program this ace v5 chip like we do in ace v3? there are no files??
Thank you very much for the content of your Channel. like!!!
keep it up i love your video's
Do your consoles come with stealth servers
I don't sell pre-modded consoles anymore, haven't for a few years.
thanks, great video
you're the proof that anyone could do an RGH right!
Do u sells Xbox’s
Thank you!
If i paid you and sent you an xbox 360s could you do this🙃
Thank you for this video
I purchased ace 5
And i don’t know haw to Merging this two point
Thank you again but it’s no need program right
The Ace V5 comes pre-programmed.
@@TheWeekendModder I have a big problem
I’m read nand and create ecc and write
But im deleted the all files and used autogg to erase nand of Xbox
Any fixes
@@darkdark2730 without an original nand dump you're gonna have to use donor files to rebuild a new nand. You'll need to write an ECC file to you console, boot cell and get your CPU key, then you can use files from a donor nand to build a new one.
The console will never be able to be a retail again, and the DVD drive won't play games without more work too.
@@TheWeekendModder thank you I’m recovered my nand and rebuild again but I’m not testing yet
This is so hard 😞
lol, amusing how this video has a YT warning about C0V1D because You used the C-word in the title.. (I am typing this wearing gloves and a mask)
112
Do you have a discord?
I don't - but I hang out in Modshops discord most of the time.