can u please upload esys and ista somewhere i can download. The codes i am getting is 4809AB, 48072F, 480A22, 48070D, 480A7F, 480A23. If you can help me step by step, i can pay you as well. thanks . i already purchased a used ABS module and pump in case we need it. The codes come during a startup in the sunny morning. :( 2015 bmw 328d xdive f30. DPF removed and Egr disabled through mapping.
Hello, I did some coding on the BMW control unit, it was reprogrammed, I noticed that the car seems more stuck, the movement is not the same and is it possible to have changed something? coding was done at FEM and DDE, thank you for your reply, thank you
@@heshamessam8042 Nothing, it doesn't give me error codes, but I feel like the van when developing something gets stuck and, as if there's a headwind, it doesn't let it drive well.
Great video. I am asking for an answer. Can the same procedure be applied to every other F30, so that I can completely follow and do the same setup for the F30 318D?
@@heshamessam8042 Have you moved the clock on your laptop so that E-Sys Launcher PRO 2.8.1 can work? Is it necessary to change the clock on the vehicle to that date?
Hi. How to disable the start/stop function from checking the zero gear sensor? Because my gearbox is damaged or something is damaged, and even though I turn this function off, it always gives me an error that start/stop is not available
@@heshamessam8042 if you have a method on how to extend knowledge about this software and vediam and dts monaco please share I would really appreciate that. My regards from Morocco brother Hesham.
hesam thank you so much your videos are helpful keep it up.
Thanks
can u please upload esys and ista somewhere i can download. The codes i am getting is 4809AB, 48072F, 480A22, 48070D, 480A7F, 480A23. If you can help me step by step, i can pay you as well. thanks . i already purchased a used ABS module and pump in case we need it. The codes come during a startup in the sunny morning. :( 2015 bmw 328d xdive f30. DPF removed and Egr disabled through mapping.
Hello, I did some coding on the BMW control unit, it was reprogrammed, I noticed that the car seems more stuck, the movement is not the same and is it possible to have changed something? coding was done at FEM and DDE, thank you for your reply, thank you
@@tiagoalmeida2714 but what do you mean by stuck ... do you have fault code
@@heshamessam8042 Nothing, it doesn't give me error codes, but I feel like the van when developing something gets stuck and, as if there's a headwind, it doesn't let it drive well.
Maybe other issues .. as there's no fault related to coding
@@heshamessam8042 because maybe it doesn't give me an error or is there some coding applied by the program?
Great video. I am asking for an answer. Can the same procedure be applied to every other F30, so that I can completely follow and do the same setup for the F30 318D?
Yes
@@heshamessam8042 Have you moved the clock on your laptop so that E-Sys Launcher PRO 2.8.1 can work? Is it necessary to change the clock on the vehicle to that date?
@@nemanjadz3902 I don't remember
Hi. How to disable the start/stop function from checking the zero gear sensor? Because my gearbox is damaged or something is damaged, and even though I turn this function off, it always gives me an error that start/stop is not available
Write on WhatsApp +201005387513
I have f20 m135 and i would like to code off ELSD to install mechanical LSD, can u help ?
I didn't do that before ... but may I read on that and see if I can ... please write to me on WhatsApp +201005387513
الله ينور يا هندسه. محتاج لو تقدر تشرح البرنامج كويس وازاى بنشيل ونعدل الملفات
حبيبي دا نورك ... مش فاهم سؤالك
@@heshamessam8042 ياعنى ممكن حضرتك تشرح ازاى نشتغل على البرنامج. وتفهمنا البرنامج والشغل علية .
@@cherif.ahmed.7839 ok
I understand what you did, and need to do this same thing. But without any narration, I could not do this.
So how can I help
you rack man thanks
@@paulantony5086 thanks
Brother we need some courses on this software.
Why you chose F20 on E-SYS? the car is F30 or that doesn't affect the communication with car?
Don't know where is that courses ... f30 is f20 on esys ... see i level (will begin will f20 ) when scanning with ista you will understand
@@heshamessam8042 if you have a method on how to extend knowledge about this software and vediam and dts monaco please share I would really appreciate that.
My regards from Morocco brother Hesham.
@@mustaphaessahihi1762 ur welcome... ok i will .. also you can ask me if you don't understand clearly
It's because you do not choose the model you choose the base. And therefore in development process the base of the F30 is F20.
ممتاز يا هندسه
تسلم