Can the Saturn 2 print a Titan?
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2023
- Order your Sovol SV06 Plus today!
Official webiste: sovol3d.com/products/sovol-sv...
Amazon US: www.amazon.com/dp/B0BXKK765N
Amazon EU: www.amazon.it/dp/B0BXL1R1PM
Use my affiliate links to order a Saturn 2 and ABS-Like 2.0 resin and help support this channel
Elegoo Saturn 2
shrsl.com/42dwm
Elegoo ABS-Like 2.0 Resin
shrsl.com/42dwn
Buy me a coffee? :D
www.buymeacoffee.com/onceinas...
Asamus War Construct
www.myminifactory.com/object/...
MINIRATER
bit.ly/minirater
Dorkfactory
www.myminifactory.com/object/...
Saturn 2 vs Saturn 8k - Fauxhammer
• Elegoo Saturn 2 Vs Sat...
Thanks Isaac for your help with the intro and playing the waiter!
Check out Isaac's Cults store here
cults3d.com/en/users/isaacodyss/
Music
• The Flower Duet - Leo ...
/ @onceinabside
Stuff I recommend
(Affiliate Links, thank you for using!)
Mars 3 Pro - shrsl.com/3yecr
Anycubic Mono X - shrsl.com/3yeco
Elegoo Mercury Wash + Cure - shrsl.com/3yecp
Anycubic Resin (cheap and cheerful) - shrsl.com/3yecn
Chitu Resin (pricey but AWESOME) - geni.us/UZbXHA6
Esun PLA+ - geni.us/lsrS - แนวปฏิบัติและการใช้ชีวิต
Order your Sovol SV06 Plus today!
Official webiste: sovol3d.com/products/sovol-sv06-plus
Amazon US: www.amazon.com/dp/B0BXKK765N
Amazon EU: www.amazon.it/dp/B0BXL1R1PM
Preorder the Klipper BEAST that is the Sovol SV07
sovol3d.com/products/sovol-sv07-klipper-direct-drive-3d-printer-print-speed-250mm-s
What’s the name of your bunny?
@@akumaking1 Their names are Merry and Pippin 🐇
I can't believe you gave a titan a tactical rock.
He can't keep getting away with this!
That opening was fantastic
Brother just said we give me all the micro plastics thanks 😂
Station Forge is hands down the best Patreon subscription I have, the amount of models and quality they release is unreal
I KNOW RIGHT! They have put GW and Forge World to shame with their Death Korps Of Krieg range!
Station forge + OPR and you're set for life!
Though I'm subbed to a few others as well...
Me and my dad actually 3D printed a full Warhound Titan off I think a 300-600 dollar Filament printer (on a trip atm so I can’t look at it atm) and the print quality is awesome. Not the “my details have hidden details” level of print quality. But it’s still amazing quality. Edit: Asked my dad. We have a Any Cubic Viper and we use Cura
While I know it wasn't your intent, the streakiness of the speed-paints give this warlord a sort of back-alley/refurbished grit feel. Something you'd expect out of mechanics/engineers that slapped something on as an afterthought for a prototype presentation.
I like it!
The brown color in particular kind of made it look like wood paneling, which honestly looks really nice.
Agreed. It looks like patina which I thought was pretty cool
Pippin just be helping you out by providing the base with some 'natural' looking erosion effects. 10/10 would buy a rabbit to help with basing effects ❤
Dude. That intro was fucking amazing hahah
Your video making/editing skills are off the charts
Also, as a fellow bunny owner, +100 points for bunny content
It amazes me how cheap 3d printing is compared to buying the models. Yeah 650 bucks ain't cheap but a warlord titan's body alone is 3x that. And you get to use models that explore 40k's visual style in completely different directions than GW's sculpts. The savings can pay back the cost of the printer within a single army, depending on what army you're building.
*laughs in chaos daemons*
Not to mention, you can print all of this on a much smaller printer if youve more patience, an Elegoo Mars 2 is like 120 dollars and can easily print a knight without issue.
Late reply but i'm currently printing a Warhound Titan on a small Mono 2. Details are incredible and it's costing me $40 to print. With the same printer, i have built a full custodes army, over 10 killteams, terrain, dice and movement trays. I STILL have not spent more money than a single FW titan.
NEVER SEEN THIS CHANNEL BEFORE , BUT AFTER IT APPEARED IN MY RECOMMENDED I CAN DEFINETLY SAY THE QUALITY AND TIME PUT INTO THE CONTENT IS INSANE , YOU NEED MORE SUBSCRIBERS
THANK YOU
BART DO YOU WANNA SEE MY NEW CHAINSAW AND HOCKEY MASK!?@@OnceinaSixSide
WHY ARE WE YELLING?
I already like this channel more than others strictly because I’m not a cat person and you are the first channel that has a bunny as a fur friend in place of a cat. Well done.
As well as designers' responsibilities in terms of the technical aspects of files it'd be super great if they could also state the physical dimensions of each model when printed at it's native scale (and what that scale is). Before I buy something I want to know if it's going to need resizing and whether it's going to fit on my printer.
The editing and storytelling quality is better and better after each vidéos !
It was a real pleasure to watch.
Thanks for all your efforts and work
There's something with the delivery that pulls me in, every time. Fantastic!
"Titans, the unobtanium of warhammer 40k" I thought that honor goes to any box set GW releases
😂
High production value takes your videos over the top. Thanks for sharing your knowledge!
First time seeing a video from your channel. You get a sub. Came for the titan, stayed for the good instructions with vision aid. Making 3D printing understandable for someone how has not jet taking the leap in to this part of the hobby.
Your videos are the fvcking best 3d printing content on this site! Keep it up
Great video, that intro was fantastic loved the cinematography!
Damn, your videos are amazing! From the skits to the actual review it's all very well done. Glad I've discovered your channel, keep it up!
Your editing is getting a real vibe to it! Great work!
that intro was a bewildering mix of bespoke, weird and beautiful. And I am all here for it:D
First time seeing this channel and, by the emperor, the editing is phenomenal. Loved the transition of dragging and dropping the files directly onto the printer
"Do you need it?" No, but I want it. Isn't that enough? Good video, funny intro.
Fantastic intro. Great video all round. Titan looks amazing.
Got to hand it to you, this channel is getting more and more brilliant..
Everything about this video was top tier! From your painting skills, printing analysis, video editing, scripting, all are top quality!
The edit is very good. Your skits are awesome. Great video!
Deserves a sub in my opinion, looking forward to more 3d printing tips and vids
Your channel is bloody brilliant mate, especially considering that you’re a small growing channel fantastic editing and cinematography well done keep it up
Great vid man, just got into 3d printing and I really appreciate the explanations!
Loved this video - first of yours I've seen - instant subscribe. Great stuff and look forward to whatever is next.
How does this channel only have 30k subs? I don't own a printer nor do I play wartable games but my golly the production of this video, editing/script wise are stellar
Your videos are really great. 🔥
Just found your channel. Brilliant video! Looking forward to your next.
I've been loving your videos recently
Production value on these videos is really good, man. Excellent work here.
You make some of the best 3d printing videos on youtube.
Incredible as always sir!
Im a patreon for sol, she announced this week that starting next month a lot of the known problems in her back log will be the main focus. This will include a full update to the asamus
Awesome video dude quality of your videos is second to none 👌 Keep it up
Amazing, I was wondering when the next video would drop and then I just randomly looked and found this gem
What a phenomenal introduction!
Pretty bloody entertaining and great post production on this.
Your editing style is one of a kind
Awesome video, worth watching for the intro alone
Amazing Directing
Honestly Looks So Good
It Didn’t Need The Armor Panels
I have the Saturn 8K. It's a great printer!
One thing to note, with higher resolution and density screens, light transmittance is lower (this is also true for TVs/monitors) so cure times will need to be longer OR the light source needs to be stronger. The UV light source is a tad weaker in the Saturn 8K vs Saturn 2 8K, so if you see profiles that work on the Saturn 2 8K, then the cure times would need to be increased on the Saturn 8k (as a starting point, always good to test range find like you mentioned!)
It can't be a once in a six side video without a hell of a lot of failures 😄love the work mate!
😂
Solwyte has actually commited to reworking some of her older kits today, this one included!
this was an excellent video, entertaining & informative. good job! -julbert
Ahhh! The titan video you mentioned! Awesome!
Awesome Video! Love the edit too
Great video. So much content in one go. At the start, I thought I was going to be most excited for the future flexible plate video. But by the end, I’m most looking forward to more rabbit clips.
speedpaint v2 is gonna be what im looking for by the sounds of it, currently im limited with how i can varnish, and the cure time for the v1 was wayyy too long for me.
but if theres people like yourself who prefer how the v1 works it would be cool if they could run both versions. perhaps marketing the 1 for its longer active time
also. i love how your rabbits came along to help with the terrain design at the end
someone had a lot of fun with the intro.
This is a timely video, since I'm upgrading from a mars 3 pro to a saturn 2, and switching from ABS-like 1.0 to ABS-like 2.0 at the same time. Thanks for that, six side.
Fantastic opening great video
Brilliant intro mate, it made my day
Dude this video is awesome!!!
Loved the intro it was hilarious!
Great stuff bud :-) Been a fan of Solwyte Studio for a while now their tanks and all are great can be a bit expensive if you only want to print one but any more than one its well worth it plus they look great!
Superb video! 🥳🥳
Dude you tagged Solwyte AND dork factory that’s sick, DF one of the most underrated creators out there
100%! I love DF and I'm looking forward to the day a video idea lines up with using some sculpts from them 😄
Warlord Titan please, perhaps a comparison between fdm and resin versions?
Appreciate your honesty and attention to detail regarding companies and their products.
You need to change how you use the new speed paints. While large armor panels are challenging they can be done with Citatdel Contrast paints which dry and cure much faster than speed paints. Apply more paint to start with (which means larger brushes on such large pieces), start in the crevices to give the excess somewhere to flow, mop up the excess when you've got full coverage. Warhipster on youtube has a great how to video for contrast that i think translates well to the other transparent paint lines.
The best intro i have ever seen.
Masterful!
Best opening ever!
That opening alone deserves a like and a sub
Amazing production value opening made me laugh so hard!
Underated Chanel!!!
Rabbit on KitAdviser, "10/10: would nibble again.
Maybe stippling the speed paint on would be a way to avoid the brush strokes.
The model looks great, and the paint job gives it a cool, Grim Dark atmosphere.
Thanks for a really informative and entertaining video.
Wow great video with an astonishing amount of information on different topics that come into play when 3d printing!!
Just recently started printing myself and after finding the "right" settings (agree its a shame elegoo does not natively support "ranges") have been printing the Arcadian Elves Colossus from Raging Heroes/heroes infinite.
Would love to see more titans!!
Also gravelord grey should still be in the speedpaint line (watch it paint it did a video on all the new paints and looked into it).
Anyways keep up the great work!
Just discovered your channel after youtube found out i was just gifted a second hand Ender 5 from a friend.... your production value is off the charts.... seriously as one filmmaker to another, props. 100K and that silver button will be in your hands in no time. if I can suiggest anything it may be to pull back just slightly on the highlights? It looks very intentional either way.
Thank you! Glad you've found your way here and I appreciate the kind words :) To be honest I've only just started experimenting with color grading just this year and I'm completely out of my depth with it haha, also my monitors are just cheapo gaming panels so that might be making it harder on myself!
How have I missed this channel?! Instant follow. And that intro is just killer! I just purchased this model to use with my 6K Mono but the files are all unsupported. Hoping I can see some tips in your vid for supporting them correctly. And possible hints? Again, Incredible channel. Why you don't have 100K followers is crazy! Thanks!
This seems like a non question of course it can and its going to look awesome.
This was an awesome video, the intro was great. I really like Station Forge models they are fun to paint.
Love that intro :D
Nice. Im looking at getting this printer.
I was dying when you spat out resin🤣 😂
Thumbs up for the opening alone
Oh I use gravelord grey all the time . I was fine with reactivating myself and used it a lot .
Great stuff
Well, I've never printed or painted (apart from the odd wall) in my life (pushing 50 years old). But I've ordered the Saturn 2, and I'm dipping my toe into what looks like a great hobby. Just hope I don't drown 😂😂
Great content we'll edited and very, very informative. Thank you
Interesting subject - check
Amusing and well shot intro - nice
Pleasing VO - cool
Has rabbit - subscribed!
I’m with you, dude. I miss Speed Paints 1.0. They were thicker and less runny. I’ve had a hard time getting a decent coat with 2.0, and also am still having reactivation issues with Blood Red in particular, a WEEK after applying it.
This was an amazing video. I've wanted to. print this beast for a while but I'm glad I waited. While we're talking about companies and business practices maybe consider looking into AK's reputation and history if you're unfamiliar with it.
Honestly the paints actually in my opinion looks great
Not mirroring the hands... Too relatable
Great vid!!! Definitely need to do a warlord class titan
Once in a six side, how do you clean your prints? And I guess get rid of resin mixed water? I've been using large cleaner and curing station bundle but I usually find I have to still go over the prints again to truly give them a clean so I'm curious how you do it. Maybe even a video on basic printing stuff? Amazing video! Your mars 3 pro video got me one and ive loved it since. That intro is incredible btw
The rabbit adding details si amazing 🤣
Good stuff!
Awesome video 👍I also use the saturn 2 with the abs-like v2 and would love to see the print settings you used for the titan.
amazing intro!
I'd love to see a video where you try to print minis with an FDM printer at SLA quality. As someone new to printing, I am drawn to SLA due to the detail of the prints and the safety of not having a heating element. But I am frequently told by friends "just get a cheap FDM and use a .1mm nozzle."
Also that warlord proxy is awesome, I'd love to see it! I know it'd be a ton of work but a cool project could be making a Titanicus army with 40k titan scale models.
Having both, I use my sla printers 10x more than my fdm
But Fdm is great for larger projects like this.
As someones who tried. Its just not worth it. it around 12 hours for one mini at 32mm scale. A resin printer like the Mars, is around the same price as a cheap fdm printer and can print an army in the same time, with a higher qualiyy and significantly less clean up. If you want a printer for printing minis. Get resin, be careful with it and youll do better than any fdm print
You got a like for the opening...I guess I'll watch the rest too
You got a sub just from the opening
Speedpaints work better in an airbrush over flat surfaces.
Great video 😊
You're the king