How to Remove off and Deep Clean the Dirty EGR Valve and EGR Valve Cooler on BMW 320d e90 n47 Engine
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- How to Remove off and Deep Clean the Dirty EGR Valve and EGR Valve Cooler on BMW 320d e90 n47 Engine
#dirtyegrvalve
#egrvalvecooler
#bmwegr
Disclaimer:
The content used in my videos are intended for educational and informational purposes only. I do not take any liability or responsibility for any damage caused while viewers trying similar type of practices on their properties. All rights to the images, music, clips, and other materials used belong to their respective owners. I do not claim ownership over any third-party content used.
Copyright Disclaimer:
Under section 107 of the copyright Act 1976, allowance is mad for fair use for purpose such a as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statues that might otherwise be infringing. Non- Profit, educational or personal use tips the balance in favor of fair use.
You helped me! yesterday I removed and cleaned egr valve & today I started the car (no eml on) and no fault codes! Ty 👌🏽
@@lewisrene7589good to hear about your successful story. Thanks 😊
I've been looking for this kind of video in German language. Couldn't find anything proper. I'm so happy i found your Video. Thanks a lot. You have a new follower now.
You are welcome thanks 😊
Man this is gold, I ve got an X1 2012, N47T and yesterday the connector/flange to the engine block and radiator blew up while driving..hence that cooling lichid is out of the way, gonna clean the egr and all ..nice vid man
Thank you 😊
i've been searching for a vid like this for ages! thanks a lot my friend
You are welcome 😊
Brilliant vid. Really easy to follow. Now a follower of your channel.
Thanks for your appreciation.
Followed your video today from start to finish! Thank you sir, egr code now clear 🙏
Good to hear your successful story. Thanks for the support. Happy New year to you.
You should have put the new steel gasket on the left side near the manifold and the right side as well ???
Nice video mate.. what kind or screwdriver / tool did you use for the T30 when taking the screws of the valve? It's in an awkward tight position to get to..
Hi sir, thanks for the video it is so helpful. I have just one question regarding the soapy water cleaning part, isn’t it bad for the electronic parts to clean it with water? I just wonder if it can harm the egr or no. Thanks in advance :)
Hi. Yes as long as the electronic parts are covered with tape and the water doesn't get inside then the soapy water is the best way to clean the egr and egr cooler. Once cleaned then best to apply little oil spray on valve shaft or flaps for smooth opening and closing. Good luck and thanks for your support.
Merci pour votre vidéo explicative. Travail bien expliqué en détail. Bonne continuation et merci encore une fois. Karim de Paris.
Really good video where did you get the replacement hose fitting clamps from for the coolant
I bought the clamps from our local auto parts shop. Thanks for your appreciation.
I took off the EGR and cooler together, i undo the 2 bolts that connects them to each other, but i can not take them apart. I tried with a flat screwdriver to tap in between, but the screwdriver broke and the parts still dont come off. What to do?
will this help resolve fault codes p042e and p042f
thank you very, informative and helpful.
Thanks 😊
Not mentioned F20/F21 1 Series. Any particular reason?
Perfectly explained ty
Thanks
I was wondering, could you use Cilit bang oven cleaner on the egr valve, saw a video on uTube a few years ago and a guy used it on an Audi TT egr valve.
Yes thats good too. Main purpose is to remove carbon off the components.
Thank U so much! Great video :)
You are welcome thanks 😊
Good video. Dont you replace all the seals for xtra peace of mind?
Yes I did.
Thanks 😊
@@diykhan any idea of the part number or where to buy?
@@daviddorado5632 I have got mine from local auto parts shop. If the seal look ok then just reuse them.
Thanks you for the video what would be the cost to pay someone to do this for me?. Same car….
It all depends on the individual mechanic. Going luck
Thankyou friend. Inshallah.
Thanks
Hello. What error code do you get that directs you that it's the EGR cooler, please? Thank you
У меня 4873 скоро буду чистить.
V useful detailed information..
My pleasure 😊
What did you use to block the hole where the coolant would come out please?
I used a bolt to stop the coolant leaking.
Very helpfull thanks
You are welcome 😊
I’m guessing emptying and then replacing with new coolant would be a good idea at the same time.
Depends on when it was changed last time
Where is your garage sir?
Excellent bhai …
Thanks bhai 🙏
Could you tell me how do you remove the EGR valve connector harness (6:25)? Do you simply disconnect it by pulling or do you need to, somehow, unlock it using the white "locks" that are on it? I'm willing to remove my EGR valve in order to clean or replace it, but I'm not sure how to remove that harness correctly, without breaking it.
There is a clip to press.
@DIY Khan can you advise which clip do you need to press?
Pull the white tab out a little, then press down on the white tab after extending. Connector should come out with a bit of wiggle.
@@matthewbroe904 thanks for your answer. It seems really helpfull 😉 Unfortunately I've already managed to brak the lock down 😂 But surelly will remember to try to do it your way in the future 😅
Did you have any error codes or other problems before cleaning egr valve ?
I had all these codes P14A3, P115C, P115D, P14A1, P0101, P042E, P042F and P245A.
@@diykhan i have 4933, and after some time got 480A, 481A, 3F25, and finaly 4D00. Car goes to limp mode, but after 20-30 km driving, it goes off limp mode and drive just fine. Any suggestions ?
I have no idea. Sorry.
@@hervoich Hi, i also have 4933 but paried with 3ff1. Only on very cold startup and car drives fine. What was ur solution?
@@victor_h9925 hi, i just disabled egr valve ( ECU deleted ) and have no problems at all.
Tack
Thank you
You are welcome 😊
Khan? For e61 is same or different??
I am not sure my friend thats because I have never dealt with it. Good luck 👍
Why don't you strengthen the bolts with a torque key>? Amateur style.
Nic video sir 👏👏
Thanks 😊
Mine won't come out more than half, please help
U need to wiggle it to pull it out.
Does anyone know the part number for the gold pipe connecting to the EGR valve.
Same problem in my car
Good luck 👍
hi friends
Hello
Mr.Muscle oven cleaner. Way way better than everything.
Yup, that’s why workshops stopped using Carb Cleaner, Brake cleaner and mineral spirits and switched to 50 gallon drums of Mr Muscle because it does everything except what its intentions was made for….
Brother use diesel to clean it laa.. u use 10 bottle also not sure 100% clean.. hahaha😂 just saying bye..
get a better cleaner those sprays are no good
How the poes do you remove that electrical connector so easily? Im gonna fucking scrap my car over this shit
Sorry to hear that. U should buy mechanic pick tool. Here is the link which will help u to remove the connectors.
@@diykhan thanks a lot👍🏼👍🏼
www.ebay.co.uk/itm/314432415187?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=OL-l3bEGSSy&sssrc=4429486&ssuid=F01xFgg6QJ6&var=&widget_ver=artemis&media=MORE
@@duktrilfromsouthafrica you are welcome 😊