Bang bole terangkan sikit tak camne modified masuk motor besar tu sebab kan lubang die kecik pastu ape sebab sebenarnya axle saya loose dh dua kali dhni😭
Motor ada saiz dia bang. Selalu saiz 540 atau 3650 shaft dia ngam ngam masuk. Kalau axle tu memang selalu problem bang. Sebab tu ramai orang tak pakai wpl d12 ni. Kalau nak pakai d12 ni boleh je, tapi jangan stress kan axle. Senang cerita main lembut lembut je throttle tu. Kalau main drift in sha allah boleh tahan lagi axle tu. Standby gear spare je. Gear cari yang keras sikit. Kalau warna tembaga tu lembut sikit. Senang loose
@@Kkaiii954 yang macam ni torque kurang sikit. Abang cari motor turn rendah sikit. Saya pakai 10.5t kira tinggi. Torque kurang. Paling senang abang cari motor brand surpass. Yang tu kira PNP je. Takyah modified
Kalau pakai rim 1/10 M-Chassis tak perlu modify fender. Kalau guna rim 1/10 biasa perlu potong fender depan sikit. kalau tak potong, rim akan kena pada fender depan. Bahagian belakang kita pakai chassis riser
Nice set up bro I have a 3650 9000kv motor in my d12 but can't seem to know how to make that 3d printed motor holder 😅 can I ask for the stl file bro badly needed it for my build thanks a lot ☺️☺️☺️
Yaa rim 1:10 tapi kena potong sikit body. Sebab rim besar sikit. Kalau tak potong rim tu ngam ngam je. Kalau jalan tak rata, adsorber akan main dan tayar akan bergesel dengan body
Maksud abang motor bracket tu yaa? Kalau bracket tu abang boleh buat tempahan 3d printing kat shopee saya. Dalam 1-3 hari bekerja saya akan pos. www.shopee.com.my/unseenhobby
i'm glad i found your videos :))))))...i'm upgrading my d12 as your project..can i ask you the file to print 3d the extra parts to mount the motor please mate.i'm using your same brushless 10.5t. thanks
Motor ni saya beli lama dah 10tahun dulu lebih kurang. Sekarang tak tahu model ni ada jual ke tak. Elok boss cari motor yang senang dapat kat market sekarang. Motor saya pakai ni pun dikira teknologi 10tahun lepas. Tak berapa uptodate dah dengan teknologi sekarang
Nice! That articulating wing is dope! Great idea! I love these little kei trucks!
Ngeri sekali pak akselerasi
🤣🤣
Nice build😍
Thanks 😙
Excellent project bro
Just wondering if one could swap bodies to sport or supercars
Bang bole terangkan sikit tak camne modified masuk motor besar tu sebab kan lubang die kecik pastu ape sebab sebenarnya axle saya loose dh dua kali dhni😭
Motor ada saiz dia bang. Selalu saiz 540 atau 3650 shaft dia ngam ngam masuk.
Kalau axle tu memang selalu problem bang. Sebab tu ramai orang tak pakai wpl d12 ni.
Kalau nak pakai d12 ni boleh je, tapi jangan stress kan axle. Senang cerita main lembut lembut je throttle tu. Kalau main drift in sha allah boleh tahan lagi axle tu. Standby gear spare je. Gear cari yang keras sikit. Kalau warna tembaga tu lembut sikit. Senang loose
@@ZakiZakaria pstu abg modified straight cintu ok tak?
@@Kkaiii954 yang macam ni torque kurang sikit. Abang cari motor turn rendah sikit. Saya pakai 10.5t kira tinggi. Torque kurang.
Paling senang abang cari motor brand surpass. Yang tu kira PNP je. Takyah modified
Mantap Bro.. Spec drift ke ni. Mantul
Hello,which body kit do you use?
1/10 rim blh muat ke? Atau ade modified fender depan? Any video teaching how to modify front fender to fit 1/10 rim?
Kalau pakai rim 1/10 M-Chassis tak perlu modify fender.
Kalau guna rim 1/10 biasa perlu potong fender depan sikit. kalau tak potong, rim akan kena pada fender depan. Bahagian belakang kita pakai chassis riser
good
Thank bro
Nice set up bro I have a 3650 9000kv motor in my d12 but can't seem to know how to make that 3d printed motor holder 😅 can I ask for the stl file bro badly needed it for my build thanks a lot ☺️☺️☺️
Sure. Will post link here once i uploaded to my google drive
Thanks bro
did you put an unlocked rear axle? 🇧🇷
There is only a locked dif option for the rwd d12
rim yg Abang pakai nih 1:10 buat hsp juga kah? aku mau beli cmn takut kandas di body
Yaa rim 1:10 tapi kena potong sikit body. Sebab rim besar sikit. Kalau tak potong rim tu ngam ngam je. Kalau jalan tak rata, adsorber akan main dan tayar akan bergesel dengan body
Masih relevan ke combo ni skrg? Nk pkai kt 1/10?
What gyro do you use bro?
Nice project mate.
What wheels are those? a 1/10 scale wheels?
Do you have some link to see them?
Yes 1/10 wheels. I buy from my friend
@@ZakiZakaria can you tell me the diameter?
Can you not design the bracket at an angle so the front of the motor is lifted up, that way the drive shaft isn't on such a steep angle.
I think so bro. Will design later. I plan to use gear reduction 😊
@@ZakiZakaria looking forward to your next video
Hello, how does it work without a gearbox, is it worth it?
Its not vgping to be good with drifting because your lower end power is already too much
Adapter untuk motor tu mana nak dapat ? Boleh bagi link tak ?
Maksud abang motor bracket tu yaa? Kalau bracket tu abang boleh buat tempahan 3d printing kat shopee saya. Dalam 1-3 hari bekerja saya akan pos.
www.shopee.com.my/unseenhobby
i'm glad i found your videos :))))))...i'm upgrading my d12 as your project..can i ask you the file to print 3d the extra parts to mount the motor please mate.i'm using your same brushless 10.5t. thanks
Give me your email address. Will send through email
@@ZakiZakaria hey man can i have your motor mount also ?
@@driftingdrew sure. Will upload on my google drive and put link here.
@@ZakiZakaria did u have to upgrade the rear end to handle the 540 motor ?
@@ZakiZakaria and awesome thankyou so much man
Papan hijau tu apa nama ek ?
Cutting matt bang nama nya
When i saw computer designing and printing i said no , it's very complicated. Nice work but doesn't help for the most people.
You just need angel kit bro
Boleh ke saya beli barang abng modi kan tak pandai and kat rumah barang tak cukup
Abg saye beli rim mcm abg tapi kenape yang abg tak gegar yang sye gegar
Gegar macam mana tu. Ada pakai hex adaptor tak? Kalau gegar sebab gelong selalu nya tak masuk betul betul hex tu.
can i have the 3d print file please?
The video is so cool. friend
Become a thriving channel.
Let's get along.
친하게 지내요. 😉👍😉
Nk jual x bang
Saya tak jual yang ni. Saya ada jual barang barang 3d print je
Abg beli barang ape
moto beli kat mana boss
Motor ni saya beli lama dah 10tahun dulu lebih kurang. Sekarang tak tahu model ni ada jual ke tak. Elok boss cari motor yang senang dapat kat market sekarang. Motor saya pakai ni pun dikira teknologi 10tahun lepas. Tak berapa uptodate dah dengan teknologi sekarang
Klo dari Indonesia bisa kah
Jika pesanan dibuat melalui shopee bisa
@@ZakiZakaria di Shopee saya g ad dah search toko bang zaki ny
@@ZakiZakaria search ny ap bang
@@ghifarzakifirmansyah2173
shope.ee/9K8Rw5aDGy
Boleh cuba dengan link ini. Saya pernah beberapa kali kirim ke indonesia melalui shopee
tutor and link