WPL D12 Modified Front Dual Shock Adsorber Suspension Damper Upgrade
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2021
- WPL D12 Modified Front Dual Shock Adsorber Suspension Damper Upgrade
Upgrading my WPL D12 suspension system from stock spring into dual shock at the front. Im happy with the result after test few method to install the mono shock.
This is my first time using this red shock adsorber. The adsorber already filled with fluid before i buy them.
Here the result what i was test yesterday with this red shock adsorber:
1. Monoshock + fluid filled = Spring didnt return after i pushed down the chasis.
2. Dual Shock + fluid filled = Hard to push. Spring didnt fully return.
3. Dual Shock (1 no fluid, 1 with fluid) = Pretty good but the spring didnt fully return, my chasis become lowered.
4. Dual Shock (both shock has no fluid) = Soft and spring work properly, can fully return. Little bit bouncing but still okay.
-------------------------------------------------------------------------
Like and follow me on fb:
unseenhobby
-------------------------------------------------------------------------
Product Link (Malaysia Shopee):
1. Front/Rear Shock Adsorber
shp.ee/s3jgpzz
2. Rear Shock Tower
shp.ee/jfmddmr
3. Metal Swing Arm Set
shp.ee/qgpn699
4. Metal Drive/Long Shaft
shp.ee/2qe37er
5. Metal Servo Upgrade
shp.ee/nng3yr9
6. Metal Bottom Plate (Chassis Guard)
shp.ee/ay6yx4r
7. Unity Gyro UR-710
shp.ee/trrii69
8. Brushed ESC HOBBYWING 1040
shp.ee/gw8kuym
9. Flysky Noble 4 Transmitter & Receiver
shp.ee/aens2ux
10. RBR/C Motor + Metal Gearbox
shopee.com.my/universal-link/... - วิทยาศาสตร์และเทคโนโลยี
Excellent job for WPL D12👍👍👍👍😀
Does anybody make an installation video for the aliexpress front coil spring installation?
Best nya ada tap buat lubang skru... nice..
Baru best. Layan diy hahaha
Wat size screw did you use?
👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍🔝🔝🔝
boss , shock tu berapa panjang?
Info nma shock nya dong om
Nak tanya ini untuk ape yer
lol, why'd you remove the oil.
Boss zaki comeback 🔥🔥🔥
Hahaha lama tak main keta rc ni. Sambil sambil upgrade record masuk youtube 🤣🤣
@@ZakiZakaria boss... Mcm mne nak buat absorber blkg tu? Ada tak senarai brg²
@@fendisofian4745 dah ada set jual di shopee. Tinggal nak pasang dan tebuk lubang skru je.
Macam saya punya leceh sikit kena custom. Saya beli axle truss wpl, pastu potong ambik bahagian hujung je. Guna untuk ikat adsorber bahagian bawah. Bahagian atas kena korek lubang sikit untuk letak shock tower.
-shock adsorber 2x
-shock tower 2x
-Axle trus 1x
@@ZakiZakaria absorber nie mmg d12 punya ke? Nak search apa kt shoppe.. maaf sy baru je beli.. nak beli brg² upgrade tp tak tau nama.. hehe
@@fendisofian4745 shopee.com.my/product/158474813/3963869695?smtt=0.357769976-1618192983.9
Saya beli dari sini
Bang dari stock benda ape kene upgrade dulu
Pada pendapat saya kalau mechanical part start dengan part ni.
1. Drive shaft
2. Axle gear
3. Gearbox (gear only/whole gearbox)
4. Motor
Barang tu Ada jual tak
Shock adsorber ni saya beli dia shopee. Local seller jual
shp.ee/s3jgpzz
Board taruk mana bang?
Ikut kesesuaian boss punya setup. Masa dalam video ni saya pakai esc brushed 60a. Saya sorok bawah bed belakang.
@@ZakiZakaria terima kasih bang. Memang teringin nk buat mcm ni.
@@pelarikota8103 sama sama. Cari shock yang sedap sikit kalau nak speed run. Kalau drift masih okay.
Not working its hard 🙄