Can I ask... I am new to my D12 that came with a 1200mAh 7.4V battery. I'm slowly modifying to all metal suspension and drive train and 370 motor with metal trans. All electronics are stock however. It's not going to be a drift truck, but I need to ask a few things to get to the next step. I want to put a roof mounted light bar on it and I see some unused plugs on the controller board. Can any of them be used for powering the light bar? And will I be able to use the stock radio or will I need one with more on-off power switches? I also hear the 370 motor I've ordered may overload the controller with a stock battery, but not sure if my uprated battery will solve that (if it is in fact a real issue)? Lastly, are there specs for front-end alignment?. My D12 is a bit too darty and no matter how well I trim, steering doesn't always come back to 0. The joints are not bound up at all and everything is locktighted. just alignment needs more tow or sompthin. Any help is appreciated. I am more dangerous than knowledgable here! PS. I'm asking these same questions on several D12 vids hoping to get answers, so sorry if you see this more than once in your YT D12 travels.
Stupid question, don’t have one so hence... so do the stock d12 tires come off the stock d12 wheels? Can’t find any indication out there that they do, so In other words, I’m trying to see if stock d12 tire would fit on like a b36 wheel?? Trying to make a custom dodge dually and get a better rubber tire option than what I’m working with at the moment.
Don't think you can remove the tires, seem glued to me. You can just use the whole wheel instead, replace the B36 wheels. Don't know why would you need the D12 tires only, I bet that the wheels are not the same design as any other RC tires out there.
@@alienmartian22 I think you might be right.. iregaurdless? I appreciate your time with me and this, hope you have a wonderful week;) Thanks again.. -Utah,USA
Hi everyone great video,I bought one of these for my wife and although it's a great looking little rc van I'm very concerned about the cheap transmitter, used for 5 minutes and battery's inside transmitter were extremely hot,I'm concerned about the electronics on this thing so I want to change transmitter,receiver,motor and the ESC so I was wondering if anyone would be kind enough to list mainly motor and ESC I can use in this please
ESC+Motor combo : Surpass Hobby 2430 25A ESC Servo : JX PDI-1181MG For transmitter, you can get the best transmitter+receiver out there but some cheap ones are the Dumbo RC. Mine just happen to have my old Sanwa MT4, so I just use that.
Thx ever so much for replying I do appreciate it alot,I have a cheap transmitter and receiver lying around so can use that but the items you suggested I will get these and fit them as I'm really concerned about the transmitter it's shipped with.
@@alienmartian22 would this combo be fine for this and thx for any feedback. www.ebay.co.uk/itm/2435-4500KV-Brushless-Motor-25A-ESC-Speed-Controller-Combo-For-1-18-1-16-RC-Car-/203443096916?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
Someone did ask on this. Try searching in AliExpress or other platforms ESC+Motor combo : Surpass Hobby 2430 25A ESC Servo : JX PDI-1181M This model is plug and play. Mine in the video needs a few modification on the chassis.
1. I can use my Sanwa MT4 remote again. 2. Steering more responsive, and it is metal gear inside the servo, robust and long lasting. 3. Throttle response is better. 4. Torque increased from standard. 5. You will feel satisfied. ... ... A lot more than you think.
@@effynomura840 maybe.. i just happen to have this set beforehand, and just go fit them in the D12. Haha... Originally want to install in my WLtoys A979 buggy. Accidental coincidence...
@@alienmartian22 martin thanks alot for having spare time to explain and reply to me abt the difference. Now i learn something. Next month i will consider doing this to me d12. Salam ramadan my friend
Servo sy beli ni, sbb dah lama beli untuk model lain, sy pkai je kat sini. Sbb tu ada modified dlm vdo. Kalau nak cun ngam masuk, cari PDI-1181MG kat Shopee.
Semua shopee. ESC search "2435 esc" tapi lagi bagus "2430 esc" sebab x payah potong chassis dah. Servo search "1181 servo", model sy pakai 1171 mcm x jumpa dah dlm shopee.. entah la.
I just bought my D12. You made me happy because here in Brazil there are few videos explaining how to assemble the accessories. thanks.
You are welcome... sorry my videos don't include me saying anything but I am glad you can see that by just from my video only.. thanks also...
Gigih buka satu persatu😅...ni betul2 hobi keep it up 👍👍👍
Haha.. dah biasa ngan jenis buka-pasang. Terima kasih....
Your so talented
Can I ask... I am new to my D12 that came with a 1200mAh 7.4V battery. I'm slowly modifying to all metal suspension and drive train and 370 motor with metal trans. All electronics are stock however. It's not going to be a drift truck, but I need to ask a few things to get to the next step. I want to put a roof mounted light bar on it and I see some unused plugs on the controller board. Can any of them be used for powering the light bar? And will I be able to use the stock radio or will I need one with more on-off power switches? I also hear the 370 motor I've ordered may overload the controller with a stock battery, but not sure if my uprated battery will solve that (if it is in fact a real issue)? Lastly, are there specs for front-end alignment?. My D12 is a bit too darty and no matter how well I trim, steering doesn't always come back to 0. The joints are not bound up at all and everything is locktighted. just alignment needs more tow or sompthin. Any help is appreciated. I am more dangerous than knowledgable here! PS. I'm asking these same questions on several D12 vids hoping to get answers, so sorry if you see this more than once in your YT D12 travels.
Good job
Thank you...
pro dah ni... aku nk bukak tayar pun xpandai... hahahaha
Xda la pro.. standard tu kene buka. klau tahap pro, kene modified bnyak. Ni tukar brg je, mod sikit. Haha.
Stupid question, don’t have one so hence... so do the stock d12 tires come off the stock d12 wheels? Can’t find any indication out there that they do, so In other words, I’m trying to see if stock d12 tire would fit on like a b36 wheel?? Trying to make a custom dodge dually and get a better rubber tire option than what I’m working with at the moment.
Don't think you can remove the tires, seem glued to me. You can just use the whole wheel instead, replace the B36 wheels. Don't know why would you need the D12 tires only, I bet that the wheels are not the same design as any other RC tires out there.
@@alienmartian22 I think you might be right.. iregaurdless?
I appreciate your time with me and this, hope you have a wonderful week;)
Thanks again..
-Utah,USA
You are welcome.... Thanks for the comments..
Hi everyone great video,I bought one of these for my wife and although it's a great looking little rc van I'm very concerned about the cheap transmitter, used for 5 minutes and battery's inside transmitter were extremely hot,I'm concerned about the electronics on this thing so I want to change transmitter,receiver,motor and the ESC so I was wondering if anyone would be kind enough to list mainly motor and ESC I can use in this please
ESC+Motor combo : Surpass Hobby 2430 25A ESC
Servo : JX PDI-1181MG
For transmitter, you can get the best transmitter+receiver out there but some cheap ones are the Dumbo RC.
Mine just happen to have my old Sanwa MT4, so I just use that.
Thx ever so much for replying I do appreciate it alot,I have a cheap transmitter and receiver lying around so can use that but the items you suggested I will get these and fit them as I'm really concerned about the transmitter it's shipped with.
@@alienmartian22 would this combo be fine for this and thx for any feedback. www.ebay.co.uk/itm/2435-4500KV-Brushless-Motor-25A-ESC-Speed-Controller-Combo-For-1-18-1-16-RC-Car-/203443096916?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
@@simonhampton1304 that motor size is what I am using now. better look for 2430 size.
Where can I find metal adjustable control arms and servo arms?
I bought this online at Shopee Malaysia app. A lot in Banggood and Aliexpress. Servo arm will come together with the new servo.
Great video
Do you have a link to the motor and esc I can’t find them ?
Someone did ask on this. Try searching in AliExpress or other platforms
ESC+Motor combo : Surpass Hobby 2430 25A ESC
Servo : JX PDI-1181M
This model is plug and play. Mine in the video needs a few modification on the chassis.
@@alienmartian22 thanks you I have found it
How did you press the gear on the motor?
Press it in like normal? If it is too tight, you can heat up the gear first then insert.
What is the advantage of upgrading all this beside being faster??
1. I can use my Sanwa MT4 remote again.
2. Steering more responsive, and it is metal gear inside the servo, robust and long lasting.
3. Throttle response is better.
4. Torque increased from standard.
5. You will feel satisfied.
...
...
A lot more than you think.
@@alienmartian22 sorry but the stock d12 power is quite strong enough am i right?😅
@@effynomura840 maybe.. i just happen to have this set beforehand, and just go fit them in the D12. Haha... Originally want to install in my WLtoys A979 buggy. Accidental coincidence...
@@alienmartian22 martin thanks alot for having spare time to explain and reply to me abt the difference. Now i learn something. Next month i will consider doing this to me d12. Salam ramadan my friend
@@effynomura840 no problem bro... join group D12 d facebook, banyak info sana. Thank you for commenting also... Salam Puasa.... sy x puasa... hehehe..
Is there overheating issue?
only have 1 battery (standard) so never run them so long.. haha..
Bos Kalibrasi ESC itu gimana caranya... Punya saya terbalik kalo maju jadi belakang
Axle belakang pusing dari kiri ke kanan.
Motor pake ukuran brapa KV?
Surpass ESC Combo 25A + brushless motor 2435 4500kv
Nak tanya…kalau pakai servo metal ni?pnp je atau kene mod?boleh bg link mana beli servo?
Servo sy beli ni, sbb dah lama beli untuk model lain, sy pkai je kat sini. Sbb tu ada modified dlm vdo.
Kalau nak cun ngam masuk, cari PDI-1181MG kat Shopee.
@@alienmartian22 kalau tukar servo arm tu pakai alloy ada ke atau pakai yang ori je?
@@NaimAbbasy kalau x silap plastik punya lain gigi servo dia, pakai yg dah kat dlm kotak 1181 tu, mmg ada yg sama panjang.
@@alienmartian22 baik bang…tq share info yg berguna pada nubis mcm sy ni…😬😬
@@NaimAbbasy kita semua noobie sbnarnya kenyataan. Semua benda kita buat, semua benda baru. X semua tahu.. hehe..
I want to build one of these so bad !!!!!!! But my budget is not going to let me do it for awhile 😢😢😢😢😢
I am sorry for that. Mine still have not had any upgrade yet since this video.
Bos blh bagi link tayar x .. baru belajar main rc..
Shopee bos. Datang ngan warna putih, tu sy spray... thank u subscribe....
shopee.com.my/product/1447857/7364378842?smtt=0.51620414-1617993028.9
bos bgi link untuk barang ni
Semua shopee.
ESC search "2435 esc" tapi lagi bagus "2430 esc" sebab x payah potong chassis dah.
Servo search "1181 servo", model sy pakai 1171 mcm x jumpa dah dlm shopee.. entah la.
Bos, servo beli mana?
Shopee
@@alienmartian22 merk apa om? Minta link nya om..makasih
@@teguhesa7210
Motor combo ESC : Surpass Hobby 2435
Servo: JX PDI-1171MG
Rekomen plug&play tanpa modified: Surpass Hobby 2430 & JX PDI-1181MG
@@alienmartian22 Klo transmitter nya pke apa om?
Transmitter lama, Sanwa MT4
Apakah servonya all metal gears bro?
Bagus JX PDI 1171 atau JX PDI 1181 bro??
Hello bro
Iya metal.
@@natansyafiq2963 1181 bos. Pasang trus masuk ngam-ngam. 1171 ada lari sikit tempat, terpaksa modified chassis
@@alienmartian22 jadi yang paling best 1181 ye?
Pelumas pakai apa
Pelumas? Bicycle grease.
@@alienmartian22 bagus gak pelumas mesin jahit gan
@@alienmartian22 bagus gak pelumas mesin jahit gan
@@tampanama4078 mesin jahit? Bisa cuma x tahan lama... mau sering ditambah setiap kali main..
@@alienmartian22 biasa nya beli di mna pelumas yang di pakai gan
Habis brp itu om
Apa yang habis nya pak?
@@alienmartian22 habis dana berapa bang
X tahu. 2 tahun lepas video nya. X diambil jumlah nya. Harga kini berbeda juga.
Fuuh laju geh
Speed up video. Ombu aluk.
Info rodanya bos 😁
3D printed wheel. Beli di shopee.
Linknya ada bos?
@@indraemem611 Shopee Malaysia
shopee.com.my/product/1447857/7364378842?smtt=0.51620414-1619357531.9