Honda GCV160 - Gasket Sequence
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2018
- Honda GCV160 Gasket Order
Just a quick video explaining the order in which the gaskets for a Honda GCV160 are installed.
These Engines don't have studs coming out of the block, so when you remove the bolts from the carburetor, the gaskets usually just fall out.
Then, when you go to put everything back together, you don't remember what order they were in...
This video should help with that!
BUY PARTS HERE;
Carb with Gaskets: amzn.to/2IlqKWO
Just Gaskets: amzn.to/2Iluxri
Spark Plug: amzn.to/2Ih285D
Air Filter: amzn.to/2L4gUtU
Recoil Pull Start: amzn.to/2L1JVXw
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks - แนวปฏิบัติและการใช้ชีวิต
My Honda mower with GCV 160 engine was surging like crazy. I thought carburetor. Cleaned it twice but the engine kept on surging.
I bought a new carb, installed it, and still didn’t solve the surging problem.
I got lucky and found your video . As I was watching it, I realized that the last 2 gaskets that connect to the intake were placed wrong. I followed the gasket sequence that you showed and problem solved.
You are the master of the trade.
Thank you for an outstanding video.
God Bless.
Thanks a million ! I searched everywhere and finally found your video. You explain it very well. Thank you again!
The best easiest to understand casket sequence out there. I wasn't for sure where the metal spacer went though I had quessed it correct. Had to be sure though. Thank you.
THANK YOU! I almost gave up hope, no, to be honest, I DID give up hope. My soul was crumpled up, crying in the corner, and defeated by the Lawnmower Gods. Then, I somehow found this video and my life is better again. Thanks so much!!! :-D
Bruce Evans IT IS SO TRUE HOW MUCH SINGLE CYLINDER ENGINES CAN BEAT US DOWN . HOW MANY TIMES WE THINK THAT WE HAVE FINALLY GOT IT TO BE STUMPED AS ONE CAN NOT EVER REALLY OBSERVE FOR THE PROBLEM WHALE PULLING ON THE STARTER .
DAVID GRENIS BOULDER COLORADO
This helped me tonight. I am a white belt with any engine stuff. I took the carb apart last and was not careful to remember the gasket sequence. This saved me. Thank you.
I have watched about half a dozen videos about the gasket locations on the GCV160, all of them others don’t hold a candle to this one, so concise, no Flim-Flam, just a video showing which is located in which location and how to identify each different one.
FABULOUS
Thanks for watching!
@@EliminatorPerformance Thanks for posting! Just yanked one apart and I knew things were off when I saw no gasket between the spacer and the carb body... the float needle was not hooked into the float as well...uhhgh!
Dude. This video has saved my sanity. I've been trying to figure out what's wrong with my mower for the longest time. Always assumed it was air in leakage but couldn't figure it out. You're video was perfect. Thanks so much for making it
Glad I could help, thanks for watching!
Me too...Took my carb off and there were gaskets everywhere...never would have gotten it back together correctly without this video...THANKS!!
Thanks a million; this really helped me get a backup mower up and running after buying it in as-is condition for 20 bucks. The previous owner--a lawn care guy--said that it needed a new carburetor, and I assumed that it just needed to be serviced. But after cleaning the ports and jets thoroughly, it still ran rough, surging really hard, and only a little less so when choked...it was clearly running lean.
It turns out that the previous owner had done two things wrong: (1) the air dam was installed backwards...blocking the hole where the ball bearing is, and (2) he was missing a gasket, probably because this particular model (GJAEA-6214884) uses a *metal* air dam, so it needs two identical gaskets (part # 16221-883-800) on each side to create a seal (as opposed to the paper air dam shown in the video, which can seal on its own without any additional gaskets). By the time I figured that I needed another gasket the parts store was closed, so I just used an Exacto knife to cut a new gasket out of thin cardboard, using the existing one as a template...runs great now.
fucked around with carb for about 2 hours couldn't get it to run properly then I come across this video and followed your instructions and now running sweetas.thanks
Man perfect. This is actual help. Not another video out there like it. Completely overlooked but def necissary. If your engine is surging,or only starting with choke like mine (AKA vacuum leak) caused by something so simple as correct gasket sequence, this video is where it's at. Thanks a ton man!!!
No problem, glad I could help. Thanks for watching!
Well my gaskets r pretty cruddy so think I'll need some gasket maker paper or tube. Sure it should have same function. Stop escaping or incoming unwanted air. Yea mine def aren't air tight worthy
I had the same problem, I originally took it apart to replace and gaskets and months went by and I finally had time to put it back together and I had reversed the black plastic spacer. Engine was surging, and I looked up this video. Flipped the plastic spacer around and now it runs beautifully.
Adding to everyone else here. Popped the air cleaner housing off and found gaskets everywhere. After trying to puzzle together the order by looking at dirt signatures and turned to TH-cam and found this gem. Thanks for putting this together!
Thanks for watching!
heck yeah!!!
Man I've spent all day trying to figure out the order of these things after taking my carb off to replace the plastic insulator piece. After looking literally everywhere online and trying different orders and the mower not running correctly, I called a timeout for the day. Now I'm drinking a beer and after a strange Google search I saw this video. Gonna give it a whirl tomorrow! Thank you sir, you are a scholar and a gentleman
Appreciate the kind words Brian, if I may ask, what were the original searches you typed in?
I can add those words/phrases into the tags and possibly make it easier for other to find this video!
I figured order/sequence was the proper term, but everyone speaks differently.
Would love to know, and thanks for watching!
@@EliminatorPerformance I'm guessing based on my searches Google figured out what I was I trying do lol but the exact search was "gasket air cleaner mower" lol
@@FuzzStockDad well I'm glad you got here eventually!
Being as experienced as I am with these mowers, even I had the exact same issue.
Pulled the bolts, gaskets fell, didn't have any idea how they went back together.
So I figured I'd make a video and it seems to be helping out quite a few people, so I'm happy!
@@EliminatorPerformance just for the update: The sequence was right on! No gas leaks or running too rich! But when I fired it up the whole mower was shaking so bad. Fortunately just had to replace the blade and all was well. Lawn is cut, finally. Thanks man. Keeping the video saved for future reference just in case
@@FuzzStockDad awesome, good to hear!
One minor problem. For those of us with the autochoke assembly on their GCV160 the plates are entirely different. Other people watching this will want to take that into account.
I just fixed a mower with the autochoke, and found this video helpful. I wouldn't say that this model is "entirely" different; it's just one key difference: instead of a paper air dam, my autochoke model had a metal one, and because metal-on-metal doesn't seal, it requires one additional gasket twice (same part number...16221-883-800...one on each side).
Dude..... the Honda gasket struggle is REAL!!!!! I had to watch your video to double check my work, thank you thank you.
Thanks, helped me to fix my mower.
Like everyone else on here I wanted to thank you for putting this clear and well explained video out. Was able to get it back together and running in 5 minutes after seeing how gaskets get replaced. Thanks again!
Anytime, cheers!
That last gasket against the engine block is the one that do it your selfers normally drop out when they assemble the carb and the engine hunts and basically you will get the repair job. Nice video that should help out a lot of your viewers.
Thanks for the info on gasket placement. I've been fighting my mower and was about to light it on fire, when I found your video. Went back and found that I had the back two gaskets and insulator in the wrong order. Rearranged them like you showed and the mower runs like a top. You saved me some serious money!
Thanks for watching, glad it helped!
Helped me out today for sure, very good video, I was stumped after taking the carb off and having everything fall apart, thank you!
Thank you so much. I could not keep my honda wood splitter running since replacing the gas line. Turns out I had turned around some of the gaskets. Runs perfectly now. Very satisfying. Thanks!!
Excellent! Definitive! I watched a ton of these videos on the gasket sequence. No jibber jabber. What I call a 'Joe Friday/Dragnet explanation: Just the facts, Jack. So easy even a cave man could follow it.
Man o man I’ve been cursing out this Japanese over engineered carburetor setup ever since I pulled the bolts to clean the the carb. So thankful I found your video as it made assembly the gaskets and carburetor a breeze!
Thanks for watching Matt!
FINALLY SOMEONE HAS A SIMPLE VIDEO ON THIS !!!!
OMG...thank you! I have been staring at this thing for a week trying to figure out how to reassemble. No other videos explain what the "metal gasket" part is for or where it goes! Mine is a 2010 Homelite power washer with GCV190. It does not have the large throttle control/choke control plate...just that dang metal gasket. Thanks brother.
Thank you for this video! I was having a problem with my mower surging after replacing the carb. Turns out I had the rubber spacer thing on backwards and once I turned it around the mower ran great!
Thank you! Can’t tell you how much I labored over getting this right even from the parts diagram.
Your video came through when I needed it, just now. Very well explained, got my Husqvarna back in business! Thanks!
Thank you for taking the time to do this video. It was very helpful. Just what I needed to finish what was supposed to be simple carb cleaning.
Thank-you for this! The assembly manuals aren't clear about where that steel gasket goes. You made getting my engine back together again a whole lot easier.
Glad I could help, Thanks for watching!
Great video. Like others I had accidentally put the spacer on upside down, after replacing carb and gaskets. Mower needed choke on for several minutes while warming up, and would then run erratically. After watching your video I found the problem and mower runs much smoother, with the choke working as it should. Thank you.
Such a well put together video. Made an awful conundrum easy. Thanks
Thank you for making a video CLEARLY showing exactly what I needed to know. On the GCV160s with auto-choke, that square plastic piece next to the block is replaced with the automatic choke module. Fits the same in sequence, and is the same thickness, though.
Glad I could help! I wanted to make the video after I pulled a carb off of one of these a while back and all the gaskets fell out, leaving me wondering what order they went in hahaha thanks for the positive feedback!
But auto choke plastic piece does not have groove on the carb side which is shown here. Both sides are flat with no groove.
Excellent display of the orientation of the gaskets. I, too, thank you for the video.
Thanks for watching Jim!
Thank you! This is showing me everything I need to know
THANKS FOR THIS AWESOME video!!I I cleaned the carb on my honda mower and i know i must have put a gasket wrong, because it is not running right,so i m going to order new ones and now i will install them right. thanks to you.
Great video - I was going to buy a new carb! I cleaned the existing one because it had a tank of bad gas. Put it back together and it would only run with the choke on. I watched your video installed gaskets in the right direction and order; now my splitter runs like a champ. THANK YOU!
Happens to the best of us, that's why I made this video! And trust me, even I rewatch it from time to time! Cheers!
Thanks for posting this video! It was just what I needed to sort out an issue I had putting the carb back on. Thanks again.
Anytime Mark, thanks for watching!
Exactly what I needed. Thanks. Especially for showing the alternate "metal" shim, since that's what's on my Honda HRX217 mower.
Thanks for watching!
Been waiting on this very informative video for a long time , finally somebody has made one - a big big thank you .
Thanks for watching!
its like ya knew i was going to have gaskets fall out when takin the carb off today. thanks!
Happens to the best of us, I've been doing this for over 6yrs and it still happens lol thanks for watching!
Thank you!! Perfect explanation with super clear visuals.
Thanks for watching!
I just wanted to say thanks for all the great vids. It's helped a lot and I appreciate them.
Thanks for watching!
Thanks so much for the video! Now I can put it back together with confidence.
I also have to add my thanks for this. Absolutely bloody brilliant!
Top man.
Awesome! Just pulled mine apart today and I needed this.
Thanks for watching!
Good looking out bruh! Im having a surging problem on my gcv190 pressure washer. I cleaned the carb and jet(s) . Did a tune-up (oil change and spark plug replacement ) , and using non ethonal gas . Just to have it still surging. I believe this may be the solution. Thanks ,whether this fixes it or not. This video is still informative and valuable. 😅😂 - 2024
Thank you so much. This was a great tutorial and I definitely needed it. You are awesome my friend.
Thank you! It helped a lot!
Excellent. Followed to put my carb, etc back on Excell 2425 pressure washer!
Thanks!
Wow, thank you for the great video. You made it so easy to follow. Thanks.
You're right when you take the carb bolts out all the gaskets fall and the sequence is gone. Just the vid I needed to put everything back in the proper order. thanks
Anytime, thanks for watching!
Why in the HE Double Hockey sticks separate bolts arent used for the airbox and carb is beyond me.
Incredibly frustrating to reassemble.
My pressure washer had light gasket adhesive on one side of the gaskets - I highly recommend using some during assembly.
Stay gold.
Well Done Bud, saved me a lot of hassle!
Thanks for that helpful info, it show me heaps it did make it a bit better , then I reset the mixer screw and that made a bigger difference . thanks again.
Thanks for a very clear and well done explanation. Just what I was looking for, and this will help me with mechanical anger management as I defeat the bloody carb.
The gaskets were always tricky because Honda decided to use bolts and they always fall out lol
This is awesome. Nobody can fix my GVC160 even after a new carby and I'm convinced they all left a gasket off or got the sequence wrong as mine will run on choke till it gets warm and I'm convinced it's taking air. $7 for a new kit and this video might put me back in mower heaven. Thank you!
It's a common issue, as I mentioned when you pull the studs the gaskets fall out and become mismatched and some people can reinstall them upside down. The holes need to line up to vent, if they don't, the engine won't run right!
@@EliminatorPerformance Since the kits have to ship from o/s I thought I'd try my hand at cutting a few of my own. Otherwise will just have to wait for the kit to arrive. I'll let you know if it works!
Thanks. Exactly what I was looking for.
Many thanks for the vid. Very handy as I DID reverse one of the spacers. See what happens tomorrow. Regards Pat
Thanks for watching Pat! Good luck.
exactly what I was missing . Thanks !
This was very helpful thank you!
A big help reminder , will save and watch for future ....👍😉
Thanks for watching!
Yup, line everything up vertically on the bolts off of the engine, then put it all into place as a unit when you assemble it to the engine. So much easier than trying to hold things in line horizontally while hoping that the gaskets all stay in place before the screws are put in last from the airbox.
this was very helpful. thank you
Thank you got a free honda poster washer carb was just silaconed on
Excellent tutorial, very helpful, thanks!
Thanks for watching!
Your video is great. I wish you would have kept the assembly process the same like when you started. Placing the two long bolts and holding them up with a piece of tape until you have finished the assembly would leave nothing for the imagination. I, too broke the same gasket and had to make one as well as the air dam. If you have a single hole punch like you would use in place of a 3 hole punch, it does a great job. Thanks again. . .
Super helpful. Thank you.
Excellent video, very hlepful!
Thanks. Clearly explained.
NICE WORK!!
Dude thanks! I needed this! 👍🏿
Thanks for watching!
perfect video, thank you.
Thank you for sharing your knowledge.
Thanks for watching!
Well done video.
I REUSED OLD SWOLLEN GASKETS IT CAME WITH AND IT IS RUNNING RICH SO I CAN SEE THAT TECHNICALLY NEW GASKETS INTO THE RIGHT ORDER MIGHT BE THE ANSWER TO THE PROBLEM . THANKS AGAIN
Thanks for watching!
ENDED UP BUYING A 21 INCH GREEN WORKS CORDED ELECTRIC LAWNMOWER I HAVE HAD MORE THAN ENOUGH SO GOD BLESS HONDA AND SAINTAN ALL TO ETERNAL FIREY HELL ONCE AND FOR ALL ETERNITIES AND NO MORE BATTERIE BULL SHIT . JUST A CORD GOOD FOR THIS ELECTRIC LAWNMOWER AND ALSO A 21 INCH CORDED ELECTRIC SNOW JOE BLOWER THAT WAS THE LAST ONE IN STOCK . AT AMAZON WHEN I ORDERED MONTHS AGO , DAVID ADAM GRENIS BOULDER COLORADO USA.
Darn. Going back out in the morning and doing it yet again. Can't remember if I put the spacer block against the engine correctly
Great Video , it does fall all out when you pull the bolts out. Thank you
Thanks for watching!
You're a lifesaver. Thank you so much. :)
Thanks for watching!
Excellent. Great Video. Thanks.
Thanks for watching Placidus!
Great job on cutting that gasket out Mon Ami...............
Some model Honda's are a pain to get everything back on because you have to hook up the linkages to the carb first or I should say hook the carb to the linkages first.........
If Honda didn't have the Zee bend on the linkage and use a turn clip or a E clip to hold the linkage it would be a lot easier to install everything first then just put the linkage on the carb....
I think you and me could teach them a trick or 2 ......... What you think ????
When I worked at PHI helicopters they would pay techs good money or anyone that was an employee money for a better idea that would help the company out.........
I have a good trick to installing all that stuff and need to make a video on it soon.......
Plus Tard Mon Ami ~!~!
Exelent explain thank you
Thanks almost got rid of my mower but I just had the gaskets in the wrong order.
Thank you!
Thank you very much😊
Thanks mate.
Thanks. Excellent video
Thanks for watching Patrick!
thanks very detailed.
Super helpful, thanks!
Thanks for watching!
Great video...............saved my bacon.....Thanks.
Thanks for watching!
What is a torque on flange bolts to tight carburetor assembly to the engine?
Lifesaver! Thanks!
Thanks for watching!
Thanks!
Mine has the long metal plate (often called control bracket).
It also has another metal plate (heat deflector) with a gasket before and after it. In the install sequence, they go on after the spacer and before the carb.
In the video, the plate & it's 2 gaskets have been combined into 1 piece. I believe it comes that way on models newer than my 2004.
Great video thanks
Thanks for watching!
Thank you..
Thank you. My troy bilt is exactly like this. Do have a question where can you get the metal gasket if needed?.
Probably amazon or eBay but I'm not sure of the part number.
Excellent , thx a lot
Thanks for watching Sylvain!
Thankyou Sir
Super video
Merci !
Thanks for watching!
Great video! Can you give me a clarification? at minute 3:07 cover the carburetor hole at the top right, why? shouldn't it be aligned like all the other gasket holes? Thank you
That's the way they are, they vent around the inner carb piece, it's like a cut out. For thermal expansion and venting
Great job thank 👏🏾👏🏾👏🏾👏🏾💯👍🏾
Thanks for watching!