Hello Bary, very nice video ! I own a 2017 Z06 and I will be adding a cold air intake. Your video made the install look pretty easy ! Thank you ! One question ? Once installed did you have to get your engine retuned because of the un-restricted cold air volume increase ?
I bought it from www.rpidesigns.com/ Then I had the guy that did my air brushing on the engine candy coat the lower sections to give it that ripple depth look.
Greag video. Just bought the same Corsa intake for my 2017 z06. Did you have any fitment issues when you went to close the hood? And did it trigger a check engine light?
So I installed mine yesterday and the hood wont close. I bought the black carbon fiber piece and the install was very easy. I went to close the hood and the right (passenger) side won't latch. I turned the hose clamp 90 degrees that runs along the top of the airbox and this did not fix the problem. I'm stumped and not sure what to do at this point short if sending it back
@@benjaminpeace2967 Not sure what would be wrong. Make sure no tubing is on top and it is all tucked in the right places. Also make sure you have the airbox into that hole correctly in the fender to make sure it is low enough. Try looking to see what is hitting. Maybe put some chalk or something on the top of it to see where it is hitting.
Yep. Going to do a uninstall, reinstall later. The bolts should only go in one way on that fender.. i dont see how i could have put that in wrong, but who knows. @barynovacek5982
Hey just installed it following this video, I couldn't tell from your camera angles, but is there supposed to be a small 1/4in ish gap between the filter and the airbox? Since theres no connection between the box and filter, so it just sorta sits in there
I don't fully remember any gap in there and should not be. Would need to be tight to filter all air going into the engine. You might want to just verify you didn't have something wrong or a part missing etc. Hope that helps.
As you can see in my video there was none of that as an issue. I am thinking you are miss aligned somehow and it needs to go forward and down a bit. If really bad reach out to Corsa as well.
For my car it feels snappier and quicker on the response from when I give it some fuel. The noise is awesome. It growls more when you are giving it the fuel, kind of like the old days when you turned your air clean cover over and hear the 4 barrel carb sucking in air, but a little deeper growl.
Excellent video. Did mine late last night. 30 mins with your video. Thank you!
This was the most well done installation video - thanks
Thank you, Hope it helped
Hello. Used your video to install mine. 30 minutes and done. Big difference on the pedal. Your video was helpful and appreciate it.
Hello Bary, very nice video ! I own a 2017 Z06 and I will be adding a cold air intake. Your video made the install look pretty easy ! Thank you ! One question ? Once installed did you have to get your engine retuned because of the un-restricted cold air volume increase ?
No, The computer with the map sensor still there automatically adjusts. I went and ran mine with a tuner and my air mixture was almsot perfect.
Great video. Where did you buy the carbon fiber panel on top of the engine?
I bought it from www.rpidesigns.com/ Then I had the guy that did my air brushing on the engine candy coat the lower sections to give it that ripple depth look.
Greag video. Just bought the same Corsa intake for my 2017 z06. Did you have any fitment issues when you went to close the hood? And did it trigger a check engine light?
I did not have any issues.
So I installed mine yesterday and the hood wont close. I bought the black carbon fiber piece and the install was very easy. I went to close the hood and the right (passenger) side won't latch. I turned the hose clamp 90 degrees that runs along the top of the airbox and this did not fix the problem. I'm stumped and not sure what to do at this point short if sending it back
@@benjaminpeace2967 Not sure what would be wrong. Make sure no tubing is on top and it is all tucked in the right places. Also make sure you have the airbox into that hole correctly in the fender to make sure it is low enough. Try looking to see what is hitting. Maybe put some chalk or something on the top of it to see where it is hitting.
Yep. Going to do a uninstall, reinstall later. The bolts should only go in one way on that fender.. i dont see how i could have put that in wrong, but who knows. @barynovacek5982
Hey just installed it following this video, I couldn't tell from your camera angles, but is there supposed to be a small 1/4in ish gap between the filter and the airbox? Since theres no connection between the box and filter, so it just sorta sits in there
I don't fully remember any gap in there and should not be. Would need to be tight to filter all air going into the engine. You might want to just verify you didn't have something wrong or a part missing etc. Hope that helps.
Just installed mine late last night. Mine has the same 1/4" gap, but still seems fully seated
GREAT instructional video. Thanks.
I installed mines and it’s making my hood lift a big did I install it wrong or do I need sit it more down because when I force hood down
My pulley rubs on side intake
As you can see in my video there was none of that as an issue. I am thinking you are miss aligned somehow and it needs to go forward and down a bit. If really bad reach out to Corsa as well.
What did you notice for performance gains and intake noise?
For my car it feels snappier and quicker on the response from when I give it some fuel. The noise is awesome. It growls more when you are giving it the fuel, kind of like the old days when you turned your air clean cover over and hear the 4 barrel carb sucking in air, but a little deeper growl.
@@barynovacek5982 Great to hear it is working out. May add one to my 19 GS.